1. Produkts beidziesview
The Generic XM-18G is a fully intelligent microcomputer humidity incubator controller designed for automatic regulation of temperature and humidity during egg incubation. It provides precise control and monitoring to create an optimal environment for hatching.
Galvenās funkcijas:
- Integrated temperature and humidity sensors for accurate readings.
- Microcomputer control for automatic temperature and humidity regulation.
- Seven signal outputs for various functions: primary heating, auxiliary heating, exhaust (air exchange), egg turning (left/right), moistening, and alarm.
- Four digital display screens for real-time temperature, humidity, egg turning times, and incubation days.
- User-configurable settings for incubation parameters.
2. Produkta sastāvdaļas
The XM-18G incubator controller package includes the following items:
- 1 x XM-18G Incubator Controller Thermostat Hygrometer unit
- 1x temperatūras sensors
- 1 x mitruma sensors
3. Tehniskās specifikācijas
Main Technical Index:
| Parametrs | Vērtība |
|---|---|
| Temperatūras displeja diapazons | 0-40.5°C |
| Temperatūras mērīšanas precizitāte | ±0.1°C |
| Mitruma displeja diapazons | 0~99%RH |
| Humidity Control Accuracy | ± 3% RH |
| Izvades līnijas | 6 lines (primary heating, auxiliary heating, exhaust, turn left, turn right, moisten) |
| Izejas strāva | Primary/Auxiliary Heating: 30A; Other outputs: 10A |
| Egg Rotation Time (Max) | 999 reizes |
| Egg Rotation Cycle (Default) | 0~999 minutes (90 minutes) |
| Egg Rotation Period (Default) | 0~999 seconds (180 seconds) |
| Air Exchange Cycle (Default) | 0~999 minutes (120 minutes) |
| Air Exchange Period (Default) | 0~999 seconds (15 seconds) |
| Measuring Line Length | Apm. 1.5 metri |
Darba apstākļi:
| Parametrs | Vērtība |
|---|---|
| Darbības sējtage | AC 180V~240V, 50HZ |
| Relatīvais mitrums | Mazāk nekā 85% |
| Apkārtējās vides temperatūra | -20°C~70°C |
Fiziskās specifikācijas:
| Parametrs | Vērtība |
|---|---|
| Modeļa Nr. | XM-18G |
| Produkta izmēri (G x P x A) | 36 x 14 x 10 cm (14.17 collas garš x 5.51 collas plats x 3.94 collas augsts) |
| Preces svars | 1.3 kg (2.1 mārciņas) |
| Materiāls | Plastmasa |
| Displeja veids | Digitālais |
4. Iestatīšana un instalēšana
Proper installation is crucial for the accurate and reliable operation of the XM-18G controller. Refer to the wiring diagram for connections.
4.1 Sensor Connection:
- Connect the temperature sensor to the designated 'T' terminal and 'GND' terminal on the back panel.
- Connect the humidity sensor to the designated 'H' terminal and 'GND' terminal on the back panel.
- Ensure secure connections to prevent inaccurate readings.
4.2 Output Connections:
The controller provides multiple output terminals for connecting various incubator components. Refer to Figure 2 for the exact layout.
- Apkures elementi: Connect primary and auxiliary heating elements to the 'Heating1' and 'Heating2' terminals.
- Egg Turning Motor: Connect the egg turning motor to the 'Turn Right' and 'Turn Left' terminals.
- Ventilating Fan: Connect the ventilating fan to the 'Ventilating fan' terminals.
- Moistening Device: Connect the moistening device to the 'Humidity Control' terminals.
- Sterilizer/Light: Connect the sterilizer and light to their respective terminals as indicated.
4.3 Strāvas pieslēgums:
Connect the AC 180V~240V, 50HZ power supply to the 'L' and 'N' terminals on the back panel. Ensure the power source matches the controller's requirements.
5. Lietošanas instrukcijas
The XM-18G controller features an intuitive interface for monitoring and adjusting incubation parameters.
5.1 Display Interpretation:
- Temperature °C: Displays the current temperature inside the incubator.
- Mitrums%: Displays the current relative humidity inside the incubator.
- Egg Turning Times: Shows the number of times eggs have been turned.
- Izšķilšanās dienas: Indicates the number of days since incubation started.
- SV°C / SV%: Displays the set values for temperature and humidity.
5.2 Pogu funkcijas:
- SET taustiņš: Enters parameter setting mode. Press and hold to cycle through settings.
- '+' taustiņš: Increases the value of the selected parameter.
- '-' atslēga: Samazina atlasītā parametra vērtību.
- Labi taustiņš: Confirms the set value and exits setting mode.
5.3 Parametru iestatīšana:
- Nospiediet un turiet IESTATĪT key for a few seconds until the display starts flashing, indicating entry into setting mode.
- Izmantojiet IESTATĪT key to cycle through different parameters (e.g., temperature set point, humidity set point, egg rotation cycle, air exchange cycle).
- Izmantojiet '+' un '-' keys to adjust the desired value for the selected parameter.
- Nospiediet pogu OK key to confirm the setting and move to the next parameter, or to exit setting mode if all parameters are adjusted.
5.4 Work Indicators:
The controller features several indicator lights to show the status of various functions:
- VENTILATORS: Norāda, ka ventilators darbojas.
- HEAT1 / HEAT2: Indicates primary or auxiliary heating is active.
- UZ AUGŠU UZ LEJU: Indicates egg turning direction.
- Slapjš: Indicates moistening is active.
- Trauksme: Indicates an alarm condition (e.g., temperature/humidity out of range).
6. Apkope
Regular maintenance ensures the longevity and optimal performance of your XM-18G controller.
- Tīrīšana: Periodiski noslaukiet kontroliera virsmu ar mīkstu, sausu drānu. Izvairieties no abrazīvu tīrīšanas līdzekļu vai šķīdinātāju lietošanas.
- Sensoru kopšana: Keep the temperature and humidity sensors clean and free from dust or debris. Do not immerse sensors in water.
- Ventilācija: Ensure the controller's ventilation openings are not obstructed to prevent overheating.
- Uzglabāšana: Kad kontrolieris netiek lietots, uzglabājiet to sausā, vēsā vietā, pasargājot to no tiešiem saules stariem un ekstremālām temperatūrām.
7. Traucējummeklēšana
If you encounter issues with your XM-18G controller, refer to the following common problems and solutions:
7.1 Nav strāvas:
- Check if the power cord is securely connected to both the controller and the power outlet.
- Pārbaudiet, vai strāvas kontaktligzda darbojas.
- Ensure the power switch on the controller is in the 'ON' position.
7.2 Inaccurate Temperature/Humidity Readings:
- Ensure the temperature and humidity sensors are correctly connected to their respective terminals (refer to Section 4.1).
- Check if the sensors are clean and free from obstructions.
- Verify that the sensors are placed appropriately within the incubator, away from direct heat sources or drafts.
7.3 Egg Turning Not Functioning:
- Confirm that the egg turning motor is correctly wired to the controller (refer to Section 4.2).
- Check the egg rotation cycle and period settings to ensure they are configured correctly (refer to Section 5.3).
- Inspect the motor for any physical obstructions or damage.
7.4 Heating/Moistening Not Activating:
- Verify that the heating elements or moistening device are correctly wired to the controller.
- Check the set temperature and humidity values. The heating/moistening will only activate if the current readings are below the set points.
- Observe the 'HEAT' or 'WET' indicator lights to confirm if the controller is sending the signal.
