Thermalright Aqua Elite 240 ARGB V2 Liquid CPU Cooler User Manual

1. Ievads

The Thermalright Aqua Elite 240 ARGB V2 is an all-in-one (AIO) liquid CPU cooler designed to provide efficient thermal management for your computer's processor. This cooler features a 240mm radiator, dual PWM fans, and addressable RGB lighting on both the fans and the pump head, offering both performance and aesthetic appeal. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your cooling system.

2. Drošības informācija

Please read and understand all safety instructions before installing or operating this product. Failure to do so may result in damage to the product, other components, or personal injury.

• Pirms instalēšanas pārliecinieties, vai datorsistēma ir izslēgta un atvienota no sienas kontaktligzdas.
• Handle components with care to avoid damage. Avoid touching the base of the cold plate directly to prevent contamination.
• Do not open the liquid cooling loop. The system is pre-filled and sealed. Opening it will void the warranty and may cause leaks.
• Glabājiet produktu bērniem un mājdzīvniekiem nepieejamā vietā.
• Use only the provided mounting hardware. Using incompatible parts may cause damage.
• Ensure proper electrical connections. Incorrect wiring can damage the cooler or motherboard.

3. Iepakojuma saturs

Verify that all components are present and in good condition before proceeding with installation. If any parts are missing or damaged, contact Thermalright support.

• 240mm Radiator with Integrated Pump/Water Block
• 2x 120mm PWM ARGB Fans (pre-installed on some models)
• Intel Mounting Bracket Kit (LGA115x/1200/1700/2011/2066)
• AMD montāžas kronšteina komplekts (AM4/AM5)
• Aizmugurējā plāksne (Intel ligzdām)
• Montāžas skrūves un starplikas
• Termiskā pasta (iepriekš uzklāta vai tūbiņā)
• Fan Splitter Cable (if not integrated)
• ARGB Controller Cable (if not integrated)
• Lietotāja rokasgrāmata

Attēls: Pāriview of the Thermalright Aqua Elite 240 ARGB V2 Liquid CPU Cooler and its main components.

4. Iestatīšana un instalēšana

This section guides you through the installation process. Ensure your PC case has adequate space for a 240mm radiator (typically 277mm x 120mm x 27mm for the radiator itself, plus fan thickness).

4.1. Pirmsinstalēšana

• Izslēdziet datoru un atvienojiet to no strāvas kontaktligzdas.
• Atveriet datora korpusu un noņemiet visus esošos procesora dzesētājus. Rūpīgi notīriet procesora virsmu, lai noņemtu veco termopastas.
• Identify your CPU socket type (Intel LGA or AMD AM series) to select the correct mounting hardware.

4.2. Radiatora un ventilatora uzstādīšana

The two 120mm fans are often pre-installed on the radiator. If not, attach them to the radiator using the long screws provided, ensuring the airflow direction is as desired (typically exhausting air out of the case or intaking air into the case, depending on your case's airflow design).

Image: The radiator with pre-installed fans mounted at the top of a PC case, showing the water block on the CPU.

Mount the radiator assembly to an available 240mm fan mount location in your PC case (e.g., top, front, or side). Secure it with the appropriate screws.

4.3. Water Block Installation (Intel LGA1700/1200/115x)

1. Place the Intel backplate behind the motherboard, aligning the holes with the CPU socket.
2. Ievietojiet pareizos starplikas caur mātesplates montāžas caurumiem un aizmugurējā plāksnē.
3. Apply thermal paste to the center of your CPU if it's not pre-applied to the cooler's cold plate.
4. Attach the Intel mounting brackets to the pump head.
5. Carefully place the pump/water block onto the CPU, aligning the holes in the mounting brackets with the standoffs.
6. Secure the pump/water block by tightening the thumb screws onto the standoffs in a cross pattern until snug. Do not overtighten.

4.4. Water Block Installation (AMD AM4/AM5)

1. Noņemiet plastmasas fiksācijas skavas no standarta AMD aizmugurējās plāksnes, bet atstājiet aizmugurējo plāksni vietā.
2. Screw the AMD standoffs into the stock backplate's mounting holes.
3. Apply thermal paste to the center of your CPU if it's not pre-applied to the cooler's cold plate.
4. Piestipriniet AMD montāžas kronšteinus pie sūkņa galvas.
5. Carefully place the pump/water block onto the CPU, aligning the holes in the mounting brackets with the standoffs.
6. Secure the pump/water block by tightening the thumb screws onto the standoffs in a cross pattern until snug. Do not overtighten.

Image: Illustrates CPU socket compatibility for Intel (LGA115X/1200/1700/2011/2066) and AMD (AM4/AM5), along with details of the radiator's micro-fin design and polymer-protected tubing.

4.5. Kabeļu savienojumi

• Sūkņa jauda: Connect the pump's 3-pin power cable to a dedicated AIO_PUMP or CPU_FAN header on your motherboard. Ensure it receives full power (usually 12V DC).
• Ventilatora jauda: Connect the fan's 4-pin PWM cables to the CPU_FAN header or a SYS_FAN header on your motherboard. Use the included fan splitter cable if connecting multiple fans to a single header.
• ARGB apgaismojums: Connect the 3-pin 5V ARGB cable from the pump and fans (if separate) to a compatible 5V ARGB header on your motherboard. Nepievienojiet 12 V RGB kontaktligzdai, jo tas sabojās gaismas diodes.

Image: Details of the pump head, highlighting the 5V 3-pin ARGB lighting interface, pump speed (2000 RPM ±10%), and 12V DC 3-pin water pump power connection.

5. Lietošanas instrukcijas

Once installed, the Thermalright Aqua Elite 240 ARGB V2 operates automatically to cool your CPU.

• Sākotnējā ieslēgšana: After installation, close your PC case, reconnect power, and power on your system. Monitor CPU temperatures using system monitoring software.
• Ventilatora vadība (PWM): The fans are Pulse Width Modulation (PWM) controlled. Their speed will automatically adjust based on CPU temperature, managed by your motherboard's BIOS/UEFI settings or dedicated software.
• ARGB apgaismojuma vadība: The addressable RGB lighting on the fans and pump head can be synchronized and controlled via your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync).

Image: Illustrates the intelligent PWM control of the fans, highlighting features like high static pressure, S-FDB bearing for quiet operation, PBT material, shock-absorbing silicone pads, 68.9 CFM airflow, 2000 RPM ±10% fan speed, and 4-pin PWM connection.

6. Apkope

Regular maintenance helps ensure optimal performance and extends the lifespan of your liquid cooler.

• Putekļu noņemšana: Periodically clean dust from the radiator fins and fan blades using compressed air or a soft brush. Excessive dust buildup can impede airflow and reduce cooling efficiency.
• Ventilatora pārbaude: Pārbaudiet ventilatora lāpstiņas, vai nav šķēršļu vai nodiluma pazīmju. Pārliecinieties, vai ventilatori griežas brīvi un klusi.
• Caurules un savienojumi: Visually inspect the tubing and connections for any signs of leaks or damage. While AIOs are sealed, it's good practice to check.
• Termiskā pasta: The thermal paste typically lasts for several years. If you notice a significant increase in CPU temperatures over time, consider reapplying fresh thermal paste.

7. Traucējummeklēšana

If you encounter issues with your Thermalright Aqua Elite 240 ARGB V2, refer to the following common troubleshooting steps:

8. Specifikācijas

Key technical specifications for the Thermalright Aqua Elite 240 ARGB V2 Liquid CPU Cooler.

Image: The Thermalright Aqua Elite 240 ARGB V2 liquid CPU cooler installed in a computer case, showcasing its white design and ARGB lighting on the fans and pump.

9. Garantija un atbalsts

Thermalright products are manufactured to the highest quality standards. For warranty information, technical support, or to report any issues, please visit the official Thermalright webvietnē vai sazinieties ar vietējo mazumtirgotāju. Saglabājiet pirkuma apliecinājumu garantijas prasību iesniegšanai.