ANDELI MIG-135PLUS 4-in-1 Multi-Process Welder Instruction Manual

1. Ievads

Thank you for choosing the ANDELI MIG-135PLUS 4-in-1 Multi-Process Welder. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your welding machine. Please read it thoroughly before use and keep it for future reference.

1.1. Drošības pasākumi

Welding can be dangerous. Always follow safety guidelines to prevent injury or damage. This machine is designed for use by trained individuals or under supervision.

• Vienmēr valkājiet atbilstošus individuālos aizsardzības līdzekļus (IAL), tostarp metināšanas ķiveri ar atbilstošu toni, metināšanas cimdus, aizsargapģērbu un drošības apavus.
• Ensure adequate ventilation in the work area to disperse welding fumes.
• Protect bystanders from arc rays and sparks. Use welding screens if necessary.
• Nemetiniet viegli uzliesmojošu materiālu tuvumā vai sprādzienbīstamā vidē.
• Pārliecinieties, vai metināšanas iekārta ir pareizi iezemēta.
• Nekad nepieskarieties elektriskajām daļām, kas atrodas zem sprieguma.
• Pirms jebkādu apkopes darbu veikšanas vai piederumu maiņas atvienojiet strāvas padevi.

1.2. Iepakojuma saturs

Izpakojot, pārliecinieties, vai ir visas preces:

• ANDELI MIG-135PLUS Welder Unit
• Flux-cored wire spool (gasless)
• MIG metināšanas deglis
• Elektrodu turētājs (MMA metināšanai)
• Zemes Clamp
• Auto-darkening Welding Helmet (convertible to goggles)
• Professional Leather Welding Gloves

Figure 1: ANDELI MIG-135PLUS Welder and included accessories.

2. Iestatīšana

2.1 Strāvas pieslēgums

• The MIG-135PLUS operates on a 220V/230V power supply. Ensure your power source matches this requirement.
• Connect the power cord securely to a grounded electrical outlet.

2.2 Wire Installation (Flux-Cored MIG)

• Atveriet stieples padeves nodalījumu.
• Place the flux-cored wire spool onto the spindle, ensuring it rotates freely.
• Izveriet vadu caur vadotni un ievietojiet to piedziņas veltņos.
• Close the drive roller tension arm and adjust the tension. The wire should feed smoothly without slipping or deforming.
• Feed the wire through the MIG torch liner until it exits the contact tip.
• The welder supports 0.030'' (0.8mm) and 0.035'' (0.9mm) flux-cored wires.

2.3 Piederumu pieslēgšana

• MIG lāpa: Connect the MIG torch cable to the corresponding port on the front panel.
• Zemes Clamp: Pievienojiet zemējumu klamp cable to the negative (-) terminal. Attach the clamp droši piestiprināts pie sagataves, nodrošinot labu elektrisko kontaktu.
• Elektroda turētājs (MMA metināšanai): Connect the electrode holder cable to the positive (+) terminal for MMA welding.
• Lift TIG Torch (Optional): If using a Lift TIG torch (not included), connect it to the appropriate port as per its instructions.

Figure 2: Front panel connections of the MIG-135PLUS welder.

3. Darbības režīmi

3.1 4-in-1 Welding Functions

The MIG-135PLUS offers four versatile welding processes:

• Gasless Flux-Cored MIG: Ideal for outdoor use and welding mild steel without the need for shielding gas. Includes a pulsed function for smoother, more stable arcs and finer weld beads.
• Standard Gasless MIG: Basic flux-cored MIG welding.
• Paceliet TIG: For precise welding of various metals (requires a separate Lift TIG torch, not included).
• MMA (Stick Welding): For welding with coated electrodes, suitable for thicker materials. Features adjustable Hot Start and Arc Force.

3. Attēls: beidziesview of the 4-in-1 welding functions.

3.2 Vadības panelis un displejs

The welder features a precise 4.1-inch LED digital display that provides real-time welding data such as voltage, current, and wire feed speed. This display is protected by a transparent cover for durability against impacts and splashes.

3.3 Welding Mode Selection (SYNERGIC vs. Manual)

• SYNERGIC Mode (Automatic): Recommended for beginners. The system automatically adjusts voltage based on the wire feed speed, simplifying parameter setup.
• Manuālais režīms: Recommended for experienced users. Allows separate and precise control over welding current and voltage precīzai regulēšanai.

Figure 4: Automatic vs. Manual operating modes.

3.4 2T/4T Trigger Modes

• 2T režīms (divu pieskārienu): Press and hold the torch trigger to start wire feeding and welding. Release the trigger to stop. Suitable for short welds.
• 4T režīms (četru pieskārienu): Press the trigger once to start wire feeding and welding. Press it again to stop. Ideal for longer welds, reducing hand fatigue.

Figure 5: 2T and 4T trigger mode settings.

3.5 Pulsed MIG Welding (Gasless)

The gasless MIG function includes a pulsed mode, which provides a smoother and more stable arc. This results in finer, more uniform weld beads and stronger joints, enhancing the quality and versatility of gasless welding.

Figure 6: Comparison of welding quality with and without pulsed MIG function.

4. Apkope

Regulāra apkope nodrošina metināšanas iekārtas ilgmūžību un optimālu veiktspēju.

• Tīrīšana: Periodically clean the machine's exterior with a dry cloth. Use compressed air to clear dust from ventilation openings.
• Degļa un kabeļi: Pārbaudiet MIG degli, elektrodu turētāju un zemējuma vadu.amp cables for any signs of damage, cuts, or loose connections. Replace damaged components immediately.
• Stieples padeves mehānisms: Keep the wire feed rollers clean and free of debris. Ensure the wire liner is not clogged.
• Uzglabāšana: Store the welder in a dry, clean environment, away from excessive dust and moisture.

5. Traucējummeklēšana

The MIG-135PLUS features an advanced protection system against overcurrent, overload, overheating, and overvoltage. If an issue occurs, the machine may automatically shut down or display an error code. Consult the table below for common issues.

Ja pēc šo risinājumu izmēģināšanas problēmas joprojām pastāv, lūdzu, sazinieties ar klientu atbalsta dienestu.

6. Tehniskās specifikācijas

7. Garantija un atbalsts

Lai saņemtu informāciju par garantiju, tehnisko atbalstu vai servisa jautājumus, lūdzu, skatiet pirkumam pievienoto dokumentāciju vai sazinieties tieši ar pārdevēju/ražotāju. Saglabājiet pirkuma apliecinājumu garantijas prasību iesniegšanai.