YABER Car Jump Starter 4000A 26800mAh User Manual

1. Ievads

Thank you for choosing the YABER Car Jump Starter. This device is designed to provide a reliable solution for starting your vehicle's battery, acting as a powerful power bank, and offering emergency lighting. This manual will guide you through the proper use, maintenance, and safety precautions to ensure optimal performance and longevity of your jump starter.

Having this device in your car's trunk provides peace of mind, ensuring you can start your car and get home without waiting for roadside assistance, especially when facing issues like a battery left unused for too long or low temperatures affecting battery performance.

Common scenarios where the YABER Jump Starter is essential.

2. Svarīgi drošības brīdinājumi

Pirms šī produkta lietošanas, lūdzu, izlasiet un izprotiet visu drošības informāciju. Šo norādījumu neievērošana var izraisīt elektriskās strāvas triecienu, ugunsgrēku vai nopietnus savainojumus.

Smart Clamps Protection Features:

The YABER Jump Starter is equipped with smart clamps that incorporate multiple protection mechanisms to ensure safe operation:

• Aizsardzība pret augstu temperatūru: Novērš pārkaršanu darbības laikā.
• Apgrieztā savienojuma aizsardzība: Alerts and prevents damage if clamps ir nepareizi savienoti.
• Pārslodzes aizsardzība: Aizsardzība pret pārmērīgu strāvas plūsmu.
• Apgrieztās iekasēšanas aizsardzība: Prevents current from flowing back into the jump starter from the vehicle battery.
• Apgrieztās polaritātes aizsardzība: Ensures correct polarity connection.
• Aizsardzība pret pārmērīgu izlādi: Protects the internal battery from deep discharge.
• Aizsardzība pret pārlādēšanu: Novērš iekšējā akumulatora pārlādēšanu.
• Aizsardzība pret īssavienojumu: Automātiski izslēdzas īssavienojuma gadījumā.

Gudrais klamps provide multiple layers of safety.

Visual representation of the smart clamp protection features.

Vispārīgi drošības pasākumi:

• Nemērciet produktu ūdenī.
• Nedarbiniet izstrādājumu sprādzienbīstamā vidē, piemēram, uzliesmojošu šķidrumu, gāzu vai putekļu klātbūtnē.
• Nemodificējiet un neizjauciet produktu.
• Uzglabāt bērniem nepieejamā vietā.
• Use only the provided smart clamps and cables.

3. Iepakojuma saturs

Lūdzu, pārbaudiet, vai iepakojumā nav šādu priekšmetu:

• Car Jump Starter (YA40) x 1
• Protective Smart Clamps (Red = positive; Black = negative) x 1
• C tipa USB vads x 1
• Inflator Hose x 1 (if applicable to your model variant)
• Lietotāja rokasgrāmata x 1
• Uzglabāšanas kaste x 1

The YABER Jump Starter and its included accessories.

4. Produkta īpašības

The YABER Car Jump Starter is a versatile device offering multiple functionalities:

• Jaudīgs palaišanas starteris: Delivers 4000A peak current, capable of starting all 12V gasoline engines and up to 10.0L diesel engines.
• Lielas ietilpības pārnēsājamais akumulators: Features a 26800mAh battery capacity with two USB outputs (5V/2.4A, 9V/2A) and a USB-C input (5V/9V 2A) for fast charging of mobile devices.
• 12V/10A DC Output: Provides power for various 12V accessories.
• LED avārijas gaisma: Integrated flashlight with 3 modes: Illumination (Normal), Strobe, and SOS for emergency situations.
• Darbība ekstremālās temperatūrās: Designed to work reliably in temperatures ranging from -20℃ to +60℃ (-4°F to 140°F).
• Smart Clamps: Equipped with multiple safety protections as detailed in the Safety Warnings section.

Beigāsview of the YABER Jump Starter's multi-functional capabilities.

5. Specifikācijas

The jump starter is designed for reliable performance in a wide range of temperatures.

6. Iestatīšana un sākotnējā uzlāde

Before first use, ensure the jump starter is fully charged. It is recommended to fully charge the device every 3-6 months to maintain battery health, even when not in use.

1. Connect the provided Type-C USB cable to the USB-C input port on the jump starter.
2. Connect the other end of the USB cable to a suitable USB wall adapter (not included) or a powered USB port.
3. The digital display on the jump starter will show the charging progress. Charge until the display shows 100%.

The device supports two-way fast charging, allowing for quick recharging of the unit itself.

7. Lietošanas instrukcijas

7.1. Transportlīdzekļa iedarbināšana, izmantojot palīgierīci

Pirms mēģināt iedarbināt transportlīdzekli, pārliecinieties, vai starteris ir uzlādēts vismaz par 50%.

1. Ievietot: Pievienojiet viedo klamp cable into the jump starter's 12V jump start port. Ensure it is fully inserted.
2. Savienot: Pievienojiet sarkano (+) klamp to the positive terminal of your vehicle's battery and the black (-) clamp uz negatīvo polu. Viedā atslēgaamps will indicate if the connection is correct.
3. Sākums: Start your car's engine. If it doesn't start immediately, wait 20-30 seconds and try again. Do not crank for more than 3 seconds per attempt.
4. Noņemt: Once the car starts, immediately remove the smart clamps from the car battery, then unplug the smart clamp cable from the jump starter.

Visual guide for the jump starting process.

The YABER Jump Starter is suitable for a wide range of 12V vehicles.

7.2. Lietošana kā pārnēsājamais akumulators

The jump starter can charge your electronic devices via its USB output ports.

1. Connect your device's USB charging cable to one of the jump starter's USB output ports (USB-1 or USB-2).
2. Palaišanas starteris automātiski sāks jūsu ierīces uzlādi.
3. Digitālais displejs parādīs atlikušo akumulatora procentuālo daudzumutage.

Charging multiple devices simultaneously with the power bank function.

7.3. LED avārijas apgaismojuma izmantošana

The built-in LED light has three modes: Illumination (normal flashlight), Strobe, and SOS.

1. Press and hold the power button for approximately 3 seconds to turn on the Illumination mode.
2. Press the power button briefly to cycle through the modes: Illumination > Strobe > SOS.
3. Press and hold the power button again for 3 seconds to turn off the light.

The LED light provides versatile illumination for various situations.

Detalizēti view of the LED emergency light modes.

8. Apkope un uzglabāšana

• Uzlāde: Uzlādējiet starteri ik pēc 3–6 mēnešiem, pat ja to nelietojat, lai paildzinātu akumulatora darbības laiku.
• Tīrīšana: Use a dry, soft cloth to clean the device. Do not use harsh chemicals or abrasive materials.
• Uzglabāšana: Store the device in a cool, dry place away from direct sunlight, heat sources, and moisture. Keep it in its protective storage box when not in use.
• Temperatūra: Avoid storing the device in environments outside its operating temperature range (-20℃ to +60℃).

9. Traucējummeklēšana

Ierīce neieslēdzas:

• Ensure the device is charged. Connect it to a power source using the Type-C cable.

Vehicle will not jump start:

• Pārbaudiet, vai viedtālrunisamp cable is fully inserted into the jump starter.
• Ensure the red (+) and black (-) clamps are connected correctly to the vehicle battery terminals. The smart clamps should indicate a correct connection.
• Verify that the jump starter has sufficient charge (at least 50%).
• If the vehicle battery is completely dead, it may take a few attempts. Wait 20-30 seconds between attempts.
• Ja viedā klamps show an error, refer to the smart clamp's indicator guide (if available) or disconnect and reconnect carefully.

Ierīces, kas neuzlādējas no pārnēsājamā akumulatora:

• Pārliecinieties, vai palaišanas starterim ir pietiekams uzlādes līmenis.
• Check that the USB cable is securely connected to both the jump starter and your device.
• Izmēģiniet citu USB kabeli vai portu.

10. Lietotāju padomi

• Always keep the jump starter charged, especially before long trips or during winter months when car batteries are more prone to failure.
• Iepazīstieties ar viedpulksteniamp indicators. They are designed to provide immediate feedback on connection status and potential issues.
• When jump starting, ensure your vehicle's ignition is off before connecting the clamps.
• After a successful jump start, allow your car's engine to run for a few minutes to recharge its battery before turning it off.

11. Garantija un atbalsts

YABER products are manufactured to the highest quality standards. This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or contact YABER customer service through the official webvietnē vai jūsu iegādes vietā.

Lūdzu, saglabājiet pirkuma apliecinājumu garantijas prasībām.

12. Bieži uzdotie jautājumi (FAQ)

Q: What power does the device charge? Is it 110V or 220V?

A: The YABER Jump Starter charges via a USB-C input (5V/2A, 9V/2A). You can use any standard USB wall adapter (110V or 220V compatible) with a USB-C output to charge the device. The jump starter itself does not have a direct 110V or 220V input.

Q: Is the product new and does it come with a warranty?

A: Yes, all new YABER products are sold with a manufacturer's warranty. Please refer to the 'Warranty and Support' section for more details.