Philips 7388 20 vatu 6 voltu halogēna spuldzes lietotāja rokasgrāmata

Ievads

This manual provides essential information for the safe and effective use of your Philips 7388 20 Watt 6 Volt Halogen Bulb. Please read these instructions carefully before installation and operation to ensure optimal performance and longevity of the product.

The Philips 7388 halogen bulb is designed to produce a comfortable, warm white light, maintaining its luminous efficiency throughout its operational life. It features a G4 socket and is suitable for various lighting applications.

Drošības informācija

Vienmēr ievērojiet šādus drošības pasākumus:

• Izslēgt: Always disconnect power to the fixture before installing, removing, or cleaning the bulb.
• Rīkojieties uzmanīgi: Halogen bulbs can become very hot. Allow the bulb to cool completely before handling.
• Izvairieties no kontakta: Do not touch the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use a clean cloth or gloves if necessary.
• Pareizi sējtage: Pārliecinieties, vai armatūras tilpumstage matches the bulb's voltage (6 Volts). Using an incorrect voltagvar sabojāt spuldzi vai armatūru.
• Pareiza armatūra: Use only in fixtures designed for halogen bulbs and with appropriate wattage vērtējumi.
• Atbrīvošanās: Izlietotās spuldzes utilizējiet saskaņā ar vietējiem noteikumiem.

Uzstādīšana un uzstādīšana

Veiciet šīs darbības, lai pareizi instalētu:

1. 1. darbība: strāvas atvienošana
   Ensure the power supply to the lighting fixture is turned off at the circuit breaker or by unplugging the fixture.
2. Step 2: Remove Old Bulb (if applicable)
   If replacing an existing bulb, allow it to cool completely. Gently pull the old G4 bulb straight out from its socket.
3. Step 3: Prepare New Bulb
   Carefully remove the new Philips 7388 bulb from its packaging. Avoid touching the glass envelope with bare hands. If you accidentally touch it, wipe it clean with a lint-free cloth moistened with rubbing alcohol.
4. Step 4: Insert New Bulb
   Align the two pins of the G4 bulb with the holes in the socket. Gently push the bulb straight into the socket until it is fully seated. Do not force it.
5. 5. darbība. Atjaunojiet barošanu
   Kad spuldze ir droši uzstādīta, atjaunojiet strāvas padevi armatūrai.
6. 6. darbība: pārbaudiet
   Ieslēdziet gaismas slēdzi, lai pārbaudītu pareizu darbību.

Lietošanas instrukcijas

The Philips 7388 halogen bulb operates immediately upon receiving power. No special operating procedures are required beyond turning the fixture's power switch on or off.

• Blāva: If used with a compatible dimmer switch, the brightness of the bulb can be adjusted. Ensure the dimmer is rated for halogen or incandescent loads and matches the bulb's voltage un vattage.
• Siltuma jauda: Halogen bulbs produce heat. Ensure adequate ventilation around the fixture to prevent overheating.

Apkope

Minimal maintenance is required for the Philips 7388 halogen bulb.

• Tīrīšana: If the bulb becomes dusty, ensure the power is off and the bulb is cool. Gently wipe the glass with a soft, dry, lint-free cloth. Do not use liquid cleaners directly on the bulb.
• Aizstāšana: When the bulb reaches the end of its life, replace it following the "Setup and Installation" steps. Always use a bulb with the same specifications (20W, 6V, G4 base) to ensure compatibility and safety.

Problēmu novēršana

If your Philips 7388 bulb is not functioning as expected, consider the following:

• Spuldze nedeg:
  • Pārbaudiet, vai armatūrai ir ieslēgta strāvas padeve.
  • Ensure the bulb is correctly seated in the G4 socket.
  • Inspect the bulb for any visible damage or a broken filament. If damaged, replace the bulb.
  • Test the fixture with a known working bulb to rule out a fixture issue.
• Spuldzes mirgošana:
  • Ensure the bulb is fully inserted into the socket.
  • Pārbaudiet, vai armatūrā vai elektroinstalācijā nav vaļīgu savienojumu.
  • If using a dimmer, ensure it is compatible with halogen bulbs and not overloaded.
• Īss spuldzes kalpošanas laiks:
  • Pārbaudiet pareizo tilpumutage (6V) is being supplied to the bulb. Overvoltagvar ievērojami samazināt spuldzes kalpošanas laiku.
  • Uzstādīšanas laikā pārliecinieties, ka spuldzi nepieskaras ar kailām rokām, jo ​​ādas tauki var izraisīt priekšlaicīgu tās bojāšanos.
  • Check for excessive vibration or heat in the fixture, which can shorten bulb life.

Specifikācijas

Key technical specifications for the Philips 7388 Halogen Bulb:

Garantija un atbalsts

For warranty information or technical support regarding your Philips 7388 Halogen Bulb, please refer to the official Philips Lighting webvietnē vai sazinieties tieši ar klientu apkalpošanas dienestu. Saglabājiet pirkuma čeku kā pirkuma apliecinājumu.

Lai iegūtu plašāku informāciju, varat apmeklēt Philips veikalu: Philips veikals vietnē Amazon