AGS BL520 Brake Lines User Manual

Ievads

This manual provides essential information for the proper installation, operation, and maintenance of your AGS BL520 Brake Line. The AGS BL520 is a high-quality steel brake line designed for automotive braking systems. Please read this manual thoroughly before installation to ensure safety and optimal performance.

Produkts beidziesview

The AGS BL520 is a durable steel brake line, measuring 20 inches in length, designed to withstand the pressures and conditions of an automotive braking system. It features standard fittings for secure connections.

Attēls: Tuvplāns view of the AGS BL520 steel brake line, showing the main steel tubing and the two threaded brass-colored fittings at each end. The line appears straight and rigid.

Galvenās funkcijas:

• Materiāls: Constructed from durable alloy steel for longevity and resistance to corrosion.
• Izmēri: Measures 20 inches (50.8 cm) in length and 0.5 inches (1.27 cm) in width.
• Nominālais sienas biezums: 1.3 mm, providing robust performance.
• Pielietojums: Designed as a replacement auto part for brake systems.

Specifikācijas

Uzstādīšanas vadlīnijas

Installation of brake lines should only be performed by qualified personnel with appropriate tools and safety equipment. Improper installation can lead to brake system failure and serious injury.

Nepieciešamie instrumenti un materiāli:

• Flare nut wrenches
• Brake fluid (compatible with your vehicle)
• Notecina panna
• Aizsargbrilles un cimdi
• Griezes momenta atslēga

Uzstādīšanas soļi:

1. Drošība pirmajā vietā: Ensure the vehicle is securely lifted and supported on jack stands. Disconnect the negative terminal of the battery.
2. Bremžu šķidruma izlešana: Place a drain pan under the master cylinder or the lowest point of the brake system. Open the bleeder valves to drain the old brake fluid.
3. Noņemt veco rindu: Carefully loosen and remove the fittings connecting the old brake line. Be prepared for residual brake fluid to leak.
4. Pārbaudiet savienojumus: Before installing the new line, inspect the mating surfaces for corrosion or damage. Clean as necessary.
5. Install New Line: Route the new AGS BL520 brake line exactly as the original. Ensure there are no kinks or sharp bends. Hand-tighten the fittings first to avoid cross-threading.
6. Pievelciet armatūras: Using a flare nut wrench, tighten the fittings to the manufacturer's specified torque. Nepievelciet pārāk cieši.
7. Uzpildīšana un atgaisošana: Refill the master cylinder with new, clean brake fluid. Bleed the entire brake system according to your vehicle's service manual to remove all air.
8. Pārbaudiet, vai nav noplūdes: After bleeding, apply firm pressure to the brake pedal and check all new connections for leaks. Repeat this process several times.
9. Testa brauciens: Pirms normālas ekspluatācijas veiciet testa braucienu ar mazu ātrumu drošā vietā, lai pārliecinātos par pareizu bremžu darbību.

Darbība

The AGS BL520 Brake Line is a passive component within your vehicle's hydraulic braking system. Its primary function is to safely transfer hydraulic pressure from the master cylinder to the brake calipers or wheel cylinders, enabling the vehicle to slow down or stop. Once properly installed and the brake system is bled, the brake line operates continuously as part of the braking circuit.

Proper operation relies on a sealed system free from leaks and air. Any compromise to the integrity of the brake line or its connections will directly impact braking performance.

Apkope

Regular inspection and maintenance are crucial for the longevity and safety of your brake system, including the AGS BL520 Brake Line.

• Vizuāla pārbaude: Periodically inspect the brake line for signs of corrosion, kinks, dents, or abrasions. Pay close attention to the areas around the fittings.
• Noplūžu pārbaudes: Check for any signs of brake fluid leaks around the fittings or along the length of the line. Even small leaks can indicate a serious problem.
• Šķidruma stāvoklis: Ensure brake fluid levels are maintained and the fluid itself is clean. Contaminated or old brake fluid can degrade internal components and lead to line failure.
• Droša montāža: Verify that the brake line is securely fastened by its mounting clips or brackets, preventing excessive vibration or rubbing against other components.
• Profesionāla pārbaude: It is recommended to have your brake system, including brake lines, inspected by a certified mechanic during routine vehicle maintenance.

Problēmu novēršana

If you experience issues with your braking system after installing or while using the AGS BL520 Brake Line, consider the following common problems and solutions:

• Mīksts vai porains bremžu pedālis:

  Iespējamais iemesls: Air in the brake lines.
  Risinājums: Re-bleed the entire brake system thoroughly. Ensure all bleeder valves are properly sealed after bleeding.

• Brake Fluid Leak:

  Iespējamais iemesls: Loose or improperly tightened fittings, damaged line, or faulty flare.
  Risinājums: Inspect all connections for tightness. If a leak persists, the line or fitting may be damaged and require replacement. Do not drive the vehicle with a brake fluid leak.

• Bremzes neieslēdzas pareizi:

  Iespējamais iemesls: Insufficient hydraulic pressure due to air, leaks, or a blockage.
  Risinājums: Check for leaks and air in the system. Ensure the brake line is not kinked or obstructed. Verify master cylinder function.
• Unusual Noises from Brakes:

  Iespējamais iemesls: While brake lines themselves typically do not cause noise, issues with other brake components (pads, rotors, calipers) can be exacerbated by a compromised hydraulic system.
  Risinājums: Inspect the entire brake system, including pads, rotors, and calipers, for wear or damage. Ensure the brake line is not rubbing against other components.

Piezīme: For any persistent or severe braking issues, consult a certified automotive technician immediately. Do not attempt to drive a vehicle with compromised brakes.

Garantijas informācija

For specific warranty terms and conditions regarding the AGS BL520 Brake Line, please refer to the official AGS manufacturer's warranty documentation provided with your purchase or visit the AGS official webvietne. Garantijas segums parasti attiecas uz ražošanas defektiem un materiālu defektiem normālos lietošanas apstākļos.

Klientu atbalsts

If you require further assistance, have questions about the AGS BL520 Brake Line, or need technical support, please contact AGS customer service through their official channels. You can typically find contact information on the manufacturer's webvietnē vai uz produkta iepakojuma.

For general inquiries or to find more products from AGS, you may visit the AGS Store on Amazon.