Ievads
This manual provides essential information for the proper use, installation, and maintenance of your Genuine Numatic RSV200 Vacuum 32MM Taper Hose/Tool Adapter. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Image: The Genuine Numatic RSV200 Vacuum 32MM Taper Hose/Tool Adapter, a black cylindrical component designed for vacuum cleaner hose connections.
Produkts beidziesview
The Numatic 32MM Taper Hose/Tool Adapter (Part Number 601141) is a genuine accessory designed to provide a secure and efficient connection between your vacuum cleaner's hose and various cleaning tools. It is specifically engineered for Numatic appliances, ensuring compatibility and reliable performance.
Galvenās funkcijas:
- Genuine Numatic part for assured compatibility and quality.
- Designed for 32mm taper hose connections.
- Ensures a secure fit between hose and vacuum tools.
- Izturīga konstrukcija ilgstošai lietošanai.
Uzstādīšana un uzstādīšana
Follow these steps to correctly install the adapter:
- Identify Compatible Components: Ensure your vacuum hose has a 32mm taper and the tool you intend to connect is compatible with this adapter. This adapter is suitable for Numatic appliances.
- Savienojums ar šļūteni: Insert the tapered end of the vacuum hose firmly into one end of the adapter. Apply gentle pressure and twist slightly until a snug fit is achieved.
- Savienojuma izveide ar rīku: Insert the desired vacuum tool (e.g., brush, crevice tool) into the other end of the adapter. Push firmly until it is securely seated.
- Pārbaudiet savienojumu: Gently pull on both the hose and the tool to ensure they are securely attached to the adapter and will not detach during use.
Lietošanas instrukcijas
Once the adapter is securely connected to both the vacuum hose and the desired tool, the vacuum cleaner can be operated as usual. The adapter facilitates the connection, allowing for efficient transfer of suction to the attached tool.
- Ensure all connections are tight before operating the vacuum.
- Do not force the adapter onto incompatible hoses or tools.
- Regularly check the adapter for any signs of wear or damage that might affect suction or connection integrity.
Apkope
The Numatic 32MM Taper Hose/Tool Adapter requires minimal maintenance to ensure its longevity and proper function.
- Tīrīšana: Wipe the adapter with a damp drānu, lai notīrītu putekļus un gružus. Nelietojiet spēcīgas ķīmiskas vielas vai abrazīvus tīrīšanas līdzekļus.
- Pārbaude: Periodically inspect the adapter for cracks, deformities, or any signs of wear that could compromise its sealing ability or structural integrity.
- Uzglabāšana: Nelietošanas laikā glabājiet adapteri tīrā, sausā vietā, pasargājot to no tiešiem saules stariem un ekstremālām temperatūrām.
Problēmu novēršana
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| Loose connection / Air leak | Adapter not fully seated; incompatible hose/tool; damaged adapter. | Ensure adapter is pushed firmly onto both hose and tool. Verify compatibility. Inspect adapter for damage and replace if necessary. |
| Piestiprināšanas grūtības | Incorrect size; debris in connection points. | Confirm hose/tool size is 32mm taper. Clean any debris from the adapter and connecting parts. |
Specifikācijas
- Daļas numurs: NUMATIC 601141
- Saderība: Numatic appliances, 32MM Taper Hoses
- Materiāls: Izturīga plastmasa
- Preces svars: 20 g
- Iepakojuma izmēri: 16 x 5.4 x 4.6 cm
Garantija un atbalsts
As a genuine Numatic product, this adapter is covered by the manufacturer's standard warranty. For specific warranty details or technical support, please refer to the official Numatic documentation or contact Numatic customer service directly.
Drošības pasākumi: Take safety precautions when repairing all appliances. Repairs to gas appliances should only be made by a Gas Safe Registered engineer. This product is an accessory for vacuum cleaners and does not involve gas appliances.
