Ievads
The Microsoft Xbox 360 Wireless Gaming Receiver for Windows allows you to use your Xbox 360 wireless accessories with your Windows PC. This receiver provides a reliable wireless connection, enabling you to enjoy your favorite games with the comfort and familiarity of your Xbox 360 controllers.
Key features of this device include:
- Works with current and future Xbox 360 wireless accessories.
- Integrated 2.4GHz high-performance wireless technology.
- Receiving range up to 30 feet with 4 different devices.
- Powered by USB 2.0 port on PC, cable length approx. 6 ft. (180 cm).
- Compatible with Windows (XP/VISTA/7).
Iestatīšana
Follow these steps to set up your Xbox 360 Wireless Gaming Receiver for Windows and connect your controller:
- Pievienojiet bezvadu uztvērēju: Plug the USB connector of the wireless receiver into an available USB 2.0 port on your PC. The LED light on the receiver will start to blink.
- Instalējiet draiverus: If your operating system does not automatically install the drivers, you may need to install them manually. Refer to the included driver disc or download the latest drivers from the official Microsoft support webvietne.
- Ieslēgšanas kontrolieris: Ensure your Xbox 360 wireless controller has fresh batteries (2 AA batteries) and press the Xbox Guide button (the large 'X' button in the center) to turn it on.
- Uzsākt savienošanu pārī uztvērējā: Press the connection button on the wireless receiver. The LED light on the receiver will blink rapidly.
- Initiate Pairing on Controller: Within 20 seconds, press the small sync button located on the top edge of your Xbox 360 wireless controller (near the charging port). The lights around the Xbox Guide button on the controller will spin.
- Apstipriniet savienojumu: Once the connection is successful, the LED light on the receiver will turn solid green, and one of the quadrants around the Xbox Guide button on your controller will light up solid, indicating its player number.
Vizuālā iestatīšanas rokasgrāmata
Video: A detailed guide demonstrating the connection method for the Xbox 360 Wireless Receiver to a PC and the subsequent driver setup process.
Darbojas
Once your Xbox 360 Wireless Gaming Receiver is set up and your controller is paired, you can begin using it for gaming on your Windows PC. The receiver supports up to four wireless controllers simultaneously, allowing for multiplayer gaming.
Connecting Additional Controllers
To connect additional controllers (up to four total), repeat steps 3-5 from the Setup section for each controller. Each successfully paired controller will illuminate a different quadrant around the Xbox Guide button, indicating its player assignment.
In-Game Usage
Most PC games that support gamepads will automatically recognize the Xbox 360 controller once it's connected via the receiver. You may need to adjust controller settings within individual game menus for optimal experience.
Apkope
The Xbox 360 Wireless Gaming Receiver requires minimal maintenance. Keep the device clean and free from dust. Store it in a dry place when not in use. Avoid exposing it to extreme temperatures or moisture.
For the wireless controllers, ensure batteries are replaced when low to maintain consistent performance. If using rechargeable battery packs, follow the manufacturer's guidelines for charging and care.
Problēmu novēršana
- Kontrolieris neizveido savienojumu:
- Ensure the receiver is securely plugged into a USB 2.0 port.
- Verify that the receiver's LED is blinking when the connection button is pressed.
- Check that the controller has fresh batteries and is powered on.
- Make sure you are pressing both the sync button on the receiver and the controller within the specified timeframe.
- Pārliecinieties, vai citas bezvadu ierīces nerada traucējumus.
- Drivers Not Installing/Device Not Recognized:
- Access Device Manager on your Windows PC (Right-click 'This PC' > 'Properties' > 'Device Manager').
- Look for 'Unknown device' or a device with a yellow exclamation mark under 'Other devices' or 'Xbox 360 Peripherals'.
- Right-click the device, select 'Update driver', then 'Browse my computer for driver software', and finally 'Let me pick from a list of available drivers on my computer'.
- Scroll down and select 'Xbox 360 Wireless Receiver for Windows' from the list under 'Xbox 360 Peripherals'. Follow the on-screen prompts to complete the installation.
- Periodiska savienojuma/kavēšanās:
- Move the receiver closer to the controller.
- Ensure there are no large metal objects or other wireless devices causing interference between the receiver and the controller.
- Try plugging the receiver into a different USB port on your PC.
Specifikācijas
| Funkcija | Specifikācija |
|---|---|
| Zīmols | Microsoft |
| Modeļa numurs | 9Z2-00001 |
| Aparatūras platforma | Xbox 360 |
| Operētājsistēmas saderība | Windows XP, Windows Vista, Windows 7 |
| Preces svars | 3.52 unces |
| Produkta izmēri | 9.25 x 7.01 x 2.01 collas |
| Savienojamība | USB 2.0 |
| Bezvadu tehnoloģija | 2.4GHz RF |
| Maksimālais pievienoto ierīču skaits | 4 wireless controllers |
| Kabeļa garums | Approx. 6 ft. (180 cm) |
Garantija un atbalsts
For information regarding warranty coverage, technical support, or service for your Microsoft Xbox 360 Wireless Gaming Receiver, please refer to the documentation included with your product or visit the official Microsoft support webvietne. Konkrēti garantijas noteikumi var atšķirties atkarībā no reģiona un iegādes datuma.
