King WHF1210-W Wall Heater Instruction Manual

1. Produkts beidziesview

The King WHF1210-W is a fan-forced wall heater designed for efficient spot heating in small rooms, apartments, bathrooms, and utility areas. This unit offers a compact and integrated heating solution, eliminating the need for bulky space heaters. It features two wattage options, 500W and 1000W, capable of heating areas up to 100 square feet. The design integrates seamlessly into your wall, resembling a standard central heating system register. For enhanced safety, the heater includes "Smart Limit Protection" which automatically shuts off the unit if it overheats.

Figure 1.1: King WHF1210-W Wall Heater installed in a residential setting, providing discreet heating.

2. Svarīga drošības informācija

Read all instructions before installing or using this heater. Failure to follow these instructions may result in electric shock, fire, or serious injury.

Vispārīgi drošības pasākumi:

• BRĪDINĀJUMS: Risk of electric shock. Disconnect power at the service panel before installing or servicing this heater.
• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains, at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
• Īpaša piesardzība ir nepieciešama, ja sildītāju izmanto bērni vai invalīdi vai to tuvumā, kā arī ikreiz, kad sildītājs tiek atstāts darboties un bez uzraudzības.
• Do not operate any heater after it malfunctions, has been dropped, or damaged in any manner. Return heater to authorized service facility for examination, electrical or mechanical adjustment, or repair.
• Nelietot ārpus telpām.
• Šis sildītājs nav paredzēts lietošanai vannas istabās, veļas mazgājamās telpās un līdzīgās telpās. Nekad neatrodiet sildītāju vietās, kur tas var iekrist vannā vai citā ūdens traukā.
• Nevadiet vadu zem paklāja. Nepārsedziet vadu ar paklājiem, skrējējiem vai līdzīgiem pārklājumiem. Novietojiet vadu tālāk no satiksmes zonas un vietā, kur tas netiks paklupts.
• Lai atvienotu sildītāju, izslēdziet vadības ierīces un pēc tam izņemiet kontaktdakšu no kontaktligzdas.
• Neievietojiet un neļaujiet svešķermeņiem iekļūt ventilācijas vai izplūdes atverēs, jo tas var izraisīt elektriskās strāvas triecienu vai aizdegšanos vai sabojāt sildītāju.
• Lai novērstu iespējamu ugunsgrēku, nekādā veidā nebloķējiet gaisa ieplūdes vai izplūdes atveres. Nelietot uz mīkstām virsmām, piemēram, gultas, kur atveres var aizsprostot.
• Sildītāja iekšpusē ir karstas un loka vai dzirksteļojošas daļas. Neizmantojiet to vietās, kur tiek izmantots vai uzglabāts benzīns, krāsa vai viegli uzliesmojoši tvaiki vai šķidrumi.
• Izmantojiet šo sildītāju tikai tā, kā aprakstīts šajā rokasgrāmatā. Jebkāda cita lietošana, ko nav ieteicis ražotājs, var izraisīt aizdegšanos, elektriskās strāvas triecienu vai ievainot cilvēkus.
• Vienmēr pievienojiet sildītājus tieši sienas kontaktligzdai/kontaktligzdai. Nekad nelietojiet ar pagarinātāju vai pārvietojamu strāvas krānu (kontaktligzdu/elektrovadu).

3. Uzstādīšanas instrukcijas

Proper installation is crucial for the safe and efficient operation of your King WHF1210-W wall heater. If you are unsure about wiring or installation, consult a qualified electrician.

Pirmsinstalēšanas kontrolsaraksts:

• Ensure power is disconnected at the circuit breaker before beginning any work.
• Verify that the electrical supply matches the heater's requirements (120V).
• Choose a suitable wall location, away from combustible materials and water sources.
• Ensure adequate clearance around the heater for proper airflow.

Uzstādīšanas soļi:

1. Sagatavojiet sienas atveri: Create an opening in the wall according to the dimensions specified in the "Specifications" section. Ensure there are no studs or obstructions.
2. Mount the Wall Can: Insert the heater's wall can into the prepared opening. Secure it firmly to the wall studs using appropriate fasteners.
3. Wire the Heater: Connect the electrical supply wires to the heater's terminal block. Follow local electrical codes and the wiring diagram provided with the unit. Ensure all connections are tight and secure.
4. Install the Heating Assembly: Carefully slide the heating assembly (fan and element) into the wall can. Ensure it is properly seated and secured.
5. Pievienojiet režģi: Secure the front grille to the heating assembly using the provided screws.
6. Atjaunot jaudu: Kad uzstādīšana ir pabeigta un visi savienojumi ir pārbaudīti, atjaunojiet strāvas padevi pie drošinātāja.

Figure 3.1: Components of the King WHF1210-W Wall Heater, showing the grille, fan assembly, and wall can for installation.

4. Lietošanas instrukcijas

The King WHF1210-W wall heater is designed for simple and effective heating. It features an electronic thermostat for precise temperature control and wattage atlase.

Ieslēgšana/izslēgšana:

• Pārliecinieties, vai sildītājs ir pareizi uzstādīts un pievienots strāvas avotam.
• Use the integrated electronic thermostat to turn the unit on or off.

Temperatūras iestatīšana:

• Adjust the thermostat to your desired room temperature. The heater will cycle on and off to maintain this setting.

Wattage Atlase:

• This model offers 500W and 1000W heating options. Refer to the specific controls on your unit for selecting the desired wattage. Augstāks vatstage provides faster heating for larger areas within its capacity.

Smart Limit Protection:

The heater is equipped with a "Smart Limit Protection" feature. If the unit detects an overheating condition, it will automatically shut off to prevent damage and ensure safety. If this occurs, turn off the heater, allow it to cool, and check for any obstructions to airflow before restarting.

5. Apkope

Regular maintenance ensures the longevity and efficient operation of your King WHF1210-W wall heater.

Tīrīšana:

• BRĪDINĀJUMS: Disconnect power at the circuit breaker before cleaning the heater.
• Regulāri tīriet sildītāja ārpusi ar mīkstu, damp audums. Neizmantojiet abrazīvus tīrīšanas līdzekļus vai šķīdinātājus.
• Gently vacuum the grille to remove dust and debris that may accumulate and obstruct airflow.

Pārbaude:

• Annually inspect the heater for any signs of damage, loose connections, or excessive dust buildup inside the unit. If any issues are found, consult a qualified technician.

6. Traucējummeklēšana

If your King WHF1210-W wall heater is not operating correctly, refer to the following common issues and solutions:

If you experience issues not listed here or if the suggested solutions do not resolve the problem, please contact King customer support or a qualified electrician.

7. Specifikācijas

8. Garantija un atbalsts

Garantijas informācija:

This King WHF1210-W wall heater comes with a 1 gadu garantija from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty card included with your product or contact King customer support.

Klientu atbalsts:

For technical assistance, troubleshooting, or warranty claims, please contact King customer support. You can find contact information on the official King Electric webvietne: www.king-electric.com.