1. Svarīgi drošības norādījumi
Please read these instructions carefully before installation and use. Failure to follow these instructions may result in property damage, personal injury, or death.
- This appliance must be installed by a qualified electrician and plumber in accordance with all local and national regulations.
- Ensure the electrical supply matches the specifications of the appliance (230 V, 3.5 kW).
- Do not operate the appliance if it is damaged or not functioning correctly.
- Do not block the water outlet or tamper ar spiediena samazināšanas vārstu.
- This unit is designed for pressureless operation. Only use the special mixer tap supplied with the unit.
- Darbības laikā neļaujiet bērniem piekļūt ierīcei.
- Pirms jebkādas apkopes vai tīrīšanas atvienojiet strāvas padevi.
2. Produkts beidziesview
The CLAGE M3/SMB is a compact, hydraulically controlled small instantaneous water heater designed for over-sink installation. It provides hot water instantly for a single tap, making it ideal for hand washing or small dishwashing tasks. The unit features an effective bare-wire heating system (IES®) and comes with a special mixer tap for wall connection.
This image displays the CLAGE M3/SMB small instantaneous water heater unit mounted above a chrome-finished mixer tap. The water heater unit is a compact, rectangular, silver-colored device designed for over-sink installation. The mixer tap features two control knobs and a curved spout.
3. Tehniskās specifikācijas
| Specifikācija | Vērtība |
|---|---|
| Modeļa numurs | M3/SMB |
| Jaudas izvade | 3.5 kW |
| Nominālais sējumstage | 230 V |
| Elektriskais savienojums | 1 AC/N/PE, Plug-ready |
| Izmēri (A x P x D) | 135 x 186 x 87 mm |
| Svars | Apm. 1.92 kg |
| Aizsardzības klase | IP 25 |
| Ūdens savienojumi | 3/8 collas |
| Darba spiediens | Pressureless |
| Montāžas veids | Wall-mounted, Over-sink |
4. Uzstādīšana (iestatīšana)
Uzstādīšana jāveic kvalificētam speciālistam.
4.1 Izpakošana
- Uzmanīgi izņemiet visas sastāvdaļas no iepakojuma.
- Pārbaudiet, vai nav redzamu bojājumu. Neuzstādiet, ja ir bojājumi.
- Ensure all parts listed in the packing contents are present.
4.2 Ierīces uzstādīšana
- Select a suitable wall location directly above the sink, ensuring sufficient space for maintenance and operation.
- Use the variable metal wall bracket to mark drilling points.
- Urbiet caurumus un ievietojiet atbilstošus sienas dībeļus.
- Securely fasten the wall bracket to the wall.
- Mount the water heater unit onto the bracket.
4.3 Ūdens pieslēgums
- Connect the cold water supply to the designated inlet on the mixer tap (usually marked blue).
- Connect the hot water outlet from the unit to the designated inlet on the mixer tap (usually marked red).
- Ensure all connections are tight to prevent leaks. Use appropriate sealing materials.
- Open the main water supply and check for leaks.
- Before electrical connection, flush the unit by opening the tap until water flows freely and air is expelled.
4.4 Elektriskais savienojums
- Ensure the main power supply is switched off at the circuit breaker.
- Connect the appliance to a dedicated 230 V, 3.5 kW electrical circuit. The unit is plug-ready.
- Verify proper grounding.
- Once connections are secure, switch on the main power supply.
5. Darbība
5.1 Pirmā lietošana
- After installation and electrical connection, ensure the unit is completely filled with water by opening the cold water tap until water flows steadily.
- Turn the hot water knob on the mixer tap. The heating element will activate, and hot water will begin to flow after a short delay.
- Adjust the water temperature by mixing hot and cold water using the mixer tap controls.
5.2 Ikdienas lietošana
- To obtain hot water, turn the hot water knob on the mixer tap. The unit will heat water as it flows through.
- To obtain cold water, turn the cold water knob.
- Adjust the flow rate and temperature as desired using the tap controls.
- The unit is designed for continuous flow within its specified capacity.
6. Apkope
Regular maintenance ensures optimal performance and longevity of your CLAGE M3/SMB water heater.
- Ārpuses tīrīšana: Tīriet ierīces ārpusi ar mīkstu, damp audums. Neizmantojiet abrazīvus tīrīšanas līdzekļus vai šķīdinātājus.
- Atkaļķošana: Depending on water hardness, limescale can build up in the heating system. If you notice a decrease in hot water flow or temperature, the unit may need descaling. This procedure should be performed by a qualified technician.
- Savienojumu pārbaude: Periodically inspect water and electrical connections for any signs of leaks or wear.
- Mixer Tap Maintenance: Clean the aerator of the mixer tap regularly to remove any debris or limescale buildup that might restrict water flow.
7. Traucējummeklēšana
Pirms sazināšanās ar klientu atbalsta dienestu, lūdzu, skatiet šo problēmu novēršanas rokasgrāmatu:
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| Nav karstā ūdens | Nav barošanas avota Ūdens plūsma ir pārāk zema Sildelementa kļūme | Check circuit breaker and power connection Increase water flow at the tap Sazinieties ar kvalificētu tehniķi |
| Zema karstā ūdens plūsma | Aizsērējis aerators Kaļķakmens uzkrāšanās Nepietiekams ūdens spiediens | Notīriet aeratoru Atkaļķošanas iekārta (profesionāls serviss) Check main water supply pressure |
| Water leaking from unit or connections | Vaļīgi savienojumi Bojātas plombas Iekšējā vaina | Tighten connections (do not overtighten) Replace seals (professional service) Sazinieties ar kvalificētu tehniķi |
| Ūdens nav pietiekami karsts | Pārāk liela ūdens plūsma Kaļķakmens uzkrāšanās | Reduce water flow at the tap Atkaļķošanas iekārta (profesionāls serviss) |
If the problem persists after attempting these solutions, please contact a qualified technician or CLAGE customer support.
8. Garantija un atbalsts
For warranty information, technical support, or spare parts, please refer to the official CLAGE website or contact your local CLAGE dealer. Keep your purchase receipt as proof of purchase.
