Nitho X4W MR09

Nitho Drive Pro Edition Racing Wheel User Manual

Model: X4W MR09

Ievads

This manual provides essential information for the proper setup, operation, and maintenance of your Nitho Drive Pro Edition Racing Wheel. Please read these instructions carefully before using the product to ensure optimal performance and longevity.

Nitho Drive Pro Edition Racing Wheel product box

Image: The Nitho Drive Pro Edition Racing Wheel packaging, displaying the steering wheel and pedal unit.

Produkta īpašības

Iepakojuma saturs

Lūdzu, pārliecinieties, vai jūsu iepakojumā ir visas preces:

Nitho Drive Pro Edition Racing Wheel

Attēls: Tuvplāns view of the Nitho Drive Pro Edition Racing Wheel, highlighting the central buttons and paddle shifters.

Nitho Drive Pro Edition Pedal Unit

Attēls: Tuvplāns view of the Nitho Drive Pro Edition pedal unit, showing the accelerator and brake pedals.

Iestatīšanas instrukcijas

  1. Izvietojums: Place the racing wheel on a stable, flat surface such as a desk or table. Ensure the suction cups on the base of the wheel are clean and can firmly attach to the surface for stability during use.
  2. Pedāļa bloka savienojums: Pievienojiet pedāļu bloka kabeli paredzētajai pieslēgvietai uz sacīkšu stūres.
  3. Sistēmas savienojums: Connect the racing wheel's USB cable to an available USB port on your PlayStation 3, PlayStation 2, or PC.
  4. Ieslēgšana: Power on your gaming console or PC. The system should detect the racing wheel automatically.
  5. Draivera instalēšana (tikai personālajam datoram): For PC use, if the device is not automatically recognized or functions incorrectly, you may need to install specific drivers. Refer to the manufacturer's webvietne jaunāko draiveru lejupielādēm.
  6. Konfigurācija: Access the game's control settings to configure the racing wheel, pedals, and buttons according to your preference.
Aizmugure view of Nitho Drive Pro Edition Racing Wheel with LED bar

Attēls: Aizmugure view of the Nitho Drive Pro Edition Racing Wheel, showing the integrated gearshifter with LED indicators.

Lietošanas instrukcijas

Once the racing wheel is set up and configured in your game, you can begin playing.

Apkope

Problēmu novēršana

Device not recognized by system:
Ensure the USB cable is securely connected to both the racing wheel and the console/PC. Try a different USB port. For PC, verify that the necessary drivers are installed.
Pedals or buttons not responding:
Check all cable connections, especially between the pedal unit and the racing wheel. Verify in-game control settings to ensure proper mapping.
Steering wheel not stable:
Ensure the surface is clean and smooth for the suction cups to adhere properly. Apply slight pressure when attaching the wheel to activate the suction cups.
Vibrācijas atgriezeniskā saite nedarbojas:
Confirm that vibration feedback is enabled in your game's settings and that the game supports this feature with the racing wheel.

Specifikācijas

FunkcijaDetaļas
Modeļa numursX4W MR09
RažotājsNitho
SaderībaPlayStation 3, PlayStation 2, dators
Stūres rata diametrsApmēram 10 collas
Preces svars1 kg 840 g
Iepakojuma izmēri29.4 x 25.2 x 25 cm

Garantija un atbalsts

For warranty information and technical support, please refer to the official Nitho webvietnē vai sazinieties ar klientu apkalpošanas nodaļu. Saglabājiet pirkuma apliecinājumu garantijas prasību iesniegšanai.

Official Nitho Store: Nitho Store on Amazon.in