1. Ievads
The Elation Professional SDC-6 v2 is a compact and versatile 6-channel DMX controller designed for easy operation of DMX-compatible lighting fixtures. It features six individual channel faders and one master fader, providing intuitive control over various lighting effects. This manual provides essential information for the safe and efficient use of your SDC-6 v2 controller, including setup, operation, maintenance, and troubleshooting.
2. Drošības instrukcijas
Please read these safety instructions carefully before operating the device. Failure to comply may result in damage to the unit, property, or personal injury.
- Vienmēr pievienojiet ierīci iezemētai strāvas kontaktligzdai.
- Ensure the power adapter's voltage atbilst vietējam barošanas avotam.
- Nepakļaujiet ierīci lietum, mitrumam vai pārmērīgam gaisa mitrumam.
- Nenovietojiet ierīci siltuma avotu tuvumā vai tiešos saules staros.
- Nedarbiniet ierīci, ja strāvas vads ir bojāts.
- Refer all servicing to qualified service personnel. There are no user-serviceable parts inside.
- Pirms tīrīšanas vai jebkādas apkopes atvienojiet strāvas padevi.
3. Iepakojuma saturs
Verify that all items listed below are present and in good condition upon opening the package:
- Elation Professional SDC-6 v2 DMX Controller
- 9 V strāvas adapteris
- Lietotāja rokasgrāmata (šis dokuments)
4. Iestatīšana
Follow these steps to set up your SDC-6 v2 DMX controller:
- Izvietojums: Place the controller on a stable, flat surface away from excessive heat, moisture, or dust.
- DMX savienojums: Connect the 3-pin DMX output connector of the SDC-6 v2 to the DMX input of your first DMX-compatible lighting fixture. If you have multiple fixtures, daisy-chain them by connecting the DMX output of the first fixture to the DMX input of the second, and so on.
- Strāvas pieslēgums: Insert the 9V power adapter into the power input jack on the controller. Plug the power adapter into a suitable electrical outlet. The power indicator LED on the controller should illuminate.
4.1. attēls: augšdaļa view of the Elation SDC-6 v2 DMX Controller, showing the six channel faders, master fader, and power indicator.
4.2. attēls: sāni view of the Elation SDC-6 v2 DMX Controller, illustrating the battery compartment for optional portable power (battery not included for primary operation).
5. Lietošanas instrukcijas
The SDC-6 v2 provides straightforward control over your DMX lighting fixtures.
5.1. Channel Faders (1-6)
Each of the six numbered faders (1 through 6) corresponds to a DMX channel. Moving a fader up increases the DMX value for that channel (from 0 to 255), while moving it down decreases the value. The specific function of each channel (e.g., dimmer, color, strobe) depends on the DMX address and mode settings of your connected lighting fixture.
5.2. Master Fader
The Master fader controls the overall output level of all active DMX channels. Moving the Master fader down will dim or turn off all lights controlled by the individual channel faders, regardless of their individual settings. Moving it up will restore the output to the levels set by the individual channel faders.
5.3. Strāvas indikators
The Power indicator LED illuminates when the unit is receiving power, indicating it is ready for operation.
6. Apkope
Proper maintenance ensures the longevity and reliable operation of your SDC-6 v2 controller.
- Tīrīšana: Use a soft, dry cloth to wipe the exterior of the unit. Do not use abrasive cleaners, solvents, or harsh chemicals.
- Uzglabāšana: When not in use for extended periods, store the controller in a cool, dry place, protected from dust and extreme temperatures.
- Jauda: Always disconnect the power adapter when the unit is not in use or before cleaning.
7. Traucējummeklēšana
If you encounter issues with your SDC-6 v2 controller, refer to the following common problems and solutions:
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| Nav strāvas indikatora gaismas | Power adapter not connected or faulty; power outlet not active. | Ensure power adapter is securely connected to the unit and a working outlet. Test the outlet with another device. |
| Lights not responding to faders | Incorrect DMX connection; Master fader is down; DMX address mismatch on fixtures; fixture not in DMX mode. | Check DMX cable connections. Ensure Master fader is up. Verify DMX addresses on fixtures match the channels being controlled. Confirm fixtures are set to DMX mode. |
| Periodiska vadība | Loose DMX cable connection; DMX signal interference. | Secure all DMX cable connections. Use high-quality DMX cables. Avoid running DMX cables parallel to power cables. |
8. Specifikācijas
| Modelis | SDC6 |
| Zīmols | Elation Professional (ADJ) |
| Kanāli | 6 DMX Channels + 1 Master Fader |
| DMX savienotājs | 3-pin XLR DMX Output |
| Barošanas avots | 9 V līdzstrāva (caur komplektā iekļauto strāvas adapteri) |
| Izmēri (G x P x A) | 173 mm x 153 mm x 55 mm (6.81 x 6.02 x 2.17 collas) |
| Svars | 1 kg (2.2 mārciņas) |
| Krāsa | Melns |
| Izcelsmes valsts | Ķīna |
9. Garantija un atbalsts
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Elation Professional webvietne. Saglabājiet pirkuma apliecinājumu garantijas prasību iesniegšanai.
For further assistance, you may contact the seller or manufacturer directly. Contact details are typically available on their respective websites or on your purchase invoice.
