Leviton 20A 125V Industrial Grade 4-in-1 Receptacle User Manual

Ievads

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Leviton 20A 125V Industrial Grade 4-in-1 Receptacle, Model 21254-HI. Please read this manual thoroughly before installation and retain it for future reference.

Drošības informācija

BRĪDINĀJUMS: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring. Installation should be performed by a qualified electrician in accordance with all local and national electrical codes.

UZMANĪBU! Use this device only with copper or copper-clad wire. Do not use with aluminum wire.

Produkta īpašības

• 20 Amp, 125 Volt rating
• Grounding type receptacle
• Durable Nylon body material
• Zinc-plated steel 8-32 mounting screws
• Industrial Series Extra Heavy Duty Hospital Grade design
• 4-in-1 receptacle configuration
• Ivory color finish

Iepakojuma saturs

• 1 x Leviton 20A 125V Industrial Grade 4-in-1 Receptacle (Model 21254-HI)

Image: Leviton 20A 125V Industrial Grade 4-in-1 Receptacle in Ivory. This image shows the front view of the electrical outlet with four receptacles.

Uzstādīšanas instrukcijas

1. Izslēgt strāvu: Locate the circuit breaker or fuse box that controls the power to the outlet where you intend to install the receptacle. Turn off the power completely and verify it is off using a voltage testeris.
2. Noņemiet veco kontaktligzdu (ja piemērojams): Carefully remove the wall plate and unscrew the old receptacle from the electrical box. Disconnect the wires, noting their connections (hot, neutral, ground).
3. Sagatavojiet vadus: Strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the circuit wires. Ensure wires are straight and free of nicks.
4. Savienojiet vadus:
   • Savienojiet zaļš vai kails vara zemējuma vads to the green grounding screw on the receptacle.
   • Savienojiet white neutral wire to the silver-colored screw terminals.
   • Savienojiet black or colored hot wire to the brass-colored screw terminals.

   Ensure all connections are tight and secure. For back-wiring, insert stripped wires into the appropriate holes and tighten screws.

5. Montāžas kontaktligzda: Carefully fold the wires into the electrical box. Secure the new receptacle to the electrical box using the provided mounting screws.
6. Uzstādiet sienas plāksni: Attach the wall plate over the receptacle.
7. Atjaunot jaudu: Ieslēdziet strāvas padevi atpakaļ, izmantojot ķēdes pārtraucēju vai drošinātāju kārbu.
8. Pārbaude: Test the receptacle with a known working device to ensure proper operation.

Always consult a qualified electrician if you are unsure about any part of the installation process.

Darbība

The Leviton 21254-HI receptacle provides four outlets for connecting electrical devices. Simply insert the plug of your device into any of the available outlets. This heavy-duty receptacle is designed for demanding environments, offering reliable power connections.

Svarīgi: Do not overload the receptacle. Ensure the total current draw of all connected devices does not exceed the 20 Amp rating of the receptacle.

Apkope

• Tīrīšana: To clean the receptacle, first turn off the power at the circuit breaker. Use a soft, damp cloth to wipe the surface. Do not use abrasive cleaners or solvents.
• Pārbaude: Periodically inspect the receptacle for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is found, turn off power and replace the receptacle immediately.
• Hermētiskums: Ensure mounting screws and wire connections remain tight. Loose connections can cause overheating.

Problēmu novēršana

Specifikācijas

Garantija un atbalsts

For warranty information or technical support, please contact Leviton customer service. Details can typically be found on the product packaging or the official Leviton webvietne.

Leviton Oficiālais Webvietne: www.leviton.com