Ievads
This manual provides comprehensive instructions for the Classic replacement remote control, specifically designed for the Telefunken A-930 S television model. This remote is a dedicated replacement, not a generic universal remote, and is engineered to perform all fixed functions of your original Telefunken A-930 S remote control, excluding any reprogrammable buttons.
It is designed for immediate use, requiring no complex programming or setup. Simply insert the provided batteries, and the remote is ready to operate your compatible device.
Produkts beidziesview
Figure 1: Classic Replacement Remote Control and Included Batteries
This image displays the Classic replacement remote control, a light grey unit with dark blue buttons, designed for the Telefunken A-930 S. Two green 'Green Cell' AAA batteries are shown alongside the remote, indicating they are included and required for operation. The remote features standard numeric keys (1-9, 0), function keys like TV, VCR, AV, Tuner, and navigation controls, along with volume and channel buttons. The brand "Classic" and model identifier "IRC82010" are visible on the lower right of the remote.
Iestatīšana
The Classic replacement remote control is designed for ease of use and requires minimal setup. Follow these steps to begin using your remote:
- Akumulatora uzstādīšana: Locate the battery compartment on the back of the remote control. Slide open the battery cover.
- Ievietojiet baterijas: Insert the two supplied AAA batteries into the compartment, ensuring the positive (+) and negative (-) terminals align correctly with the indicators inside the compartment.
- Aizvērt nodalījumu: Bīdiet atpakaļ akumulatora vāciņu vietā, līdz tas droši noklikšķ.
- Nav nepieciešama programmēšana: This remote control is pre-programmed for the Telefunken A-930 S and does not require any additional programming or code entry. It is ready for immediate use once batteries are installed.
If the remote does not respond after battery installation, please refer to the Troubleshooting section.
Lietošanas instrukcijas
This replacement remote control replicates the primary functions of your original Telefunken A-930 S remote. Point the remote directly at your Telefunken A-930 S device and press the desired button.
- Ieslēgšanas poga (⏻): Located at the top right, press to turn your Telefunken A-930 S device on or off.
- Ciparu pogas (0-9): Use these buttons to directly select channels or input numerical values.
- Kanāls uz augšu/uz leju (▲/▼): Navigate through channels sequentially.
- Skaļuma palielināšana/ samazināšana (+/-): Pielāgojiet audio skaļuma līmeni.
- Izslēgšanas poga (🔇): Izslēdziet vai ieslēdziet audio izvadi.
- Input/Source Buttons (TV, VCR, AV, Tuner): Select the desired input source for your television.
- Navigation Buttons (Arrows and OK/Enter): Use the directional arrows to navigate menus and the central button to confirm selections.
- Atskaņošanas vadīklas (atskaņot, pauzēt, apturēt, attīt atpakaļ, pārtīt uz priekšu): If your Telefunken A-930 S supports VCR or other media playback, these buttons control playback functions.
- Special Functions (REC. TIME LP, TIMER 1-8, CLOCK SET, CURSOR): These buttons provide access to specific recording, timer, and clock setting functions as supported by your Telefunken A-930 S.
For detailed information on specific functions and advanced features of your Telefunken A-930 S, please refer to the original device's instruction manual.
Apkope
Pareiza kopšana un apkope pagarinās jūsu tālvadības pults kalpošanas laiku.
- Tīrīšana: Tālvadības pults noslaukšanai izmantojiet mīkstu, sausu drānu. Noturīgu netīrumu gadījumā viegli noslaukietampNoslaukiet drānu ar ūdeni vai maigu, neabrazīvu tīrīšanas līdzekli. Izvairieties no spēcīgu ķīmisku vielu vai abrazīvu materiālu lietošanas.
- Akumulatora nomaiņa: Replace batteries when the remote's performance degrades or it stops responding. Always replace both batteries at the same time with new AAA batteries. Do not mix old and new batteries, or different types of batteries.
- Uzglabāšana: Uzglabājiet tālvadības pulti vēsā, sausā vietā, pasargājot to no tiešiem saules stariem un ekstremālām temperatūrām. Ja tālvadības pults netiks izmantota ilgāku laiku, ieteicams izņemt baterijas, lai novērstu noplūdi.
- Izvairieties no bojājumiem: Do not drop the remote, expose it to water, or attempt to disassemble it.
Problēmu novēršana
If you experience issues with your Classic replacement remote control, please refer to the following common problems and solutions:
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| Tālvadības pults nereaģē. | Baterijas ir izlādējušās vai nepareizi ievietotas. | Replace both AAA batteries with new ones, ensuring correct polarity (+/-). |
| Tālvadības pults darbojas ar pārtraukumiem. | Low battery power; obstruction between remote and device; remote sensor on device is blocked. | Replace batteries. Ensure a clear line of sight between the remote and the Telefunken A-930 S. Remove any obstructions. |
| Dažas pogas nedarbojas. | Button malfunction; function not supported by the device. | Ensure the button is clean and not stuck. Verify if the function is supported by your Telefunken A-930 S model. This remote performs fixed functions only. |
Ja problēma joprojām pastāv pēc šo risinājumu izmēģināšanas, lūdzu, sazinieties ar klientu atbalsta dienestu.
Specifikācijas
| Funkcija | Detaļas |
|---|---|
| Produkta veids | Rezerves tālvadības pults |
| Zīmols | Klasika |
| Saderīgas ierīces | Telefunken A-930 S |
| Modeļa numurs | 5052563564043 |
| ASIN | B003WCTTWI |
| Nepieciešamas baterijas | 2 x AAA (iekļauts) |
| Ražotājs | Klasika |
| Izcelsmes valsts | Koreja, Republika |
| Pirmais pieejamais datums | 18. gada 2010. jūlijs |
Garantija un atbalsts
This Classic replacement remote control comes with a 12 mēnešu garantija no iegādes datuma, kas attiecas uz ražošanas defektiem un darbības traucējumiem normālas lietošanas laikā.
For warranty claims, technical support, or any inquiries regarding your remote control, please contact the retailer or manufacturer directly. Please retain your proof of purchase for warranty validation.
