Produkts beidziesview
The Orbit 57034 3/4" Brass Automatic Converter Sprinkler Valve is designed to transform existing manual brass irrigation valves into fully automatic valves. This unit is compatible with standard 3/4 inch brass valve bodies from various manufacturers, including Champion, Superior, Rain Bird, and LawnLife, provided they have 1-1/4 inch-16 UN threads. It features a 24 VAC solenoid for compatibility with major irrigation controller brands and includes an adjustable flow control for precise water pressure management.
Constructed from durable brass, this converter valve offers enhanced longevity compared to plastic alternatives. It incorporates a reinforced valve diaphragm with a copper washer seal to prevent leaks and a stainless steel spring for reliable operation. The valve is designed to operate within a pressure range of 25 to 150 PSI.
Image: The Orbit 57034 3/4 inch Brass Automatic Converter Sprinkler Valve, showing its brass construction and solenoid.
Uzstādīšana un uzstādīšana
Follow these steps for proper installation of your Orbit 57034 Automatic Converter Sprinkler Valve:
- Izslēdziet ūdens padevi: Before beginning any installation, ensure the main water supply to your irrigation system is completely shut off to prevent water flow and potential leaks.
- Remove Existing Valve Stem: Carefully remove the existing manual valve stem from the brass valve body. This typically involves unscrewing it.
- Install Automatic Brass Converter: Thread the new Orbit automatic brass converter into the existing brass valve body. Ensure it is securely tightened to prevent leaks. This unit is a direct screw-in replacement for worn converter valves.
- Pievienojiet vadu: Connect the two wires from the solenoid to your sprinkler controller's wiring harness. This valve is compatible with all major 24 VAC irrigation controllers, including Orbit B-hyve, Hydro-Rain, Rain Bird, and Hunter. The solenoid features nickel-plated copper wire for reliable operation.
- Atjaunot ūdensapgādi: Once the converter is installed and wired, slowly turn the main water supply back on. Check for any leaks around the valve body.
Image: Visual guide showing the process of installing the automatic brass converter into an existing valve body.
Lietošanas instrukcijas
The Orbit 57034 valve offers both automatic and manual operation capabilities:
- Automātiska darbība: Once connected to a compatible 24 VAC irrigation controller, the valve will open and close according to the programmed schedule. Ensure your controller is properly set up for automatic watering cycles.
- Manual Operation (Bleed Screw): The valve features a manual bleed screw. This allows for quick testing of the valve operation or running a zone independently of the automatic schedule without an electrical connection. To manually open the valve, turn the bleed screw counter-clockwise. To close it, turn it clockwise.
- Plūsmas kontroles regulēšana: The integrated flow control allows you to fine-tune the water pressure to your sprinkler system. Adjusting the flow control can reduce sprinkler fogging and over-spray, optimizing water distribution. Turn the flow control knob to increase or decrease the water flow rate.
Image: Diagram highlighting the flow control adjustment and manual on/off feature on the Orbit 57034 valve.
Apkope
Regular maintenance helps ensure the longevity and optimal performance of your Orbit 57034 valve:
- Periodiskā pārbaude: Periodically inspect the valve for any signs of wear, damage, or leaks. Pay attention to the connections and the area around the solenoid.
- Tīrīšana: If debris or sediment accumulates, it may affect valve operation. Turn off the water supply and carefully disassemble the top portion of the converter to clean any internal components. Reassemble securely.
- Diaphragm and Spring Check: The valve features a reinforced diaphragm with a copper washer seal and a stainless steel spring. While designed for durability, these components can wear over time. If you notice consistent leaks or improper valve operation, these internal parts may require inspection or replacement. The unit is designed for easy replacement of worn converter valves.
- Ziemošana: In regions subject to freezing temperatures, it is crucial to properly winterize your irrigation system, including the converter valve, to prevent freeze damage. Consult your irrigation system's overall winterization guide.
Problēmu novēršana
If you encounter issues with your Orbit 57034 valve, refer to the following common problems and solutions:
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| Valve does not open automatically. |
|
|
| Valve does not close completely or leaks. |
|
|
| Low water pressure or flow. |
|
|
Specifikācijas
| Funkcija | Detaļas |
|---|---|
| Modeļa numurs | 57034 |
| Zīmols | Orbīta |
| Materiāls | Misiņš |
| Vārsta tips | Pārveidošanas vārsts |
| Ieplūdes/izplūdes savienojuma izmērs | 0.75 collas |
| Savienojuma veids | Vītņots |
| Vītnes izmērs | 0.75 inches (1-1/4 inch-16 UN threads for valve body compatibility) |
| Maksimālais darba spiediens | 150 PSI (Note: Product specifications also list 125 Pound per Square Foot) |
| Elektriskā saderība | 24 VAC (compatible with major irrigation controllers) |
| Vienuma izmēri (G x P x A) | 7 x 4 x 4 collas |
| Preces svars | 2.3 mārciņas |
| UPC | 046878570344 |
Garantijas informācija
The Orbit 57034 3/4" Brass Automatic Converter Sprinkler Valve comes with a 6 gada garantija. For specific terms and conditions, or to make a warranty claim, please refer to the official Orbit webvietni vai sazinieties ar klientu atbalsta dienestu.
Image: Product packaging indicating a 6-year warranty.
Klientu atbalsts
For further assistance, technical support, or inquiries regarding your Orbit 57034 Automatic Converter Sprinkler Valve, please visit the official Orbit webvietnē vai sazinieties ar viņu klientu apkalpošanas nodaļu. Kontaktinformācija parasti ir atrodama uz produkta iepakojuma vai ražotāja webvietne.
Tiešsaistes resursi: Visit the Orbit Store on Amazon
