1. Ievads
This manual provides detailed instructions for the installation, operation, and maintenance of your Winjet Street Series LED Tail Lights, model WJ20-0114-05. These tail lights are designed specifically for the Volkswagen Golf GTI MK4 models manufactured between 1999 and 2005. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Figure 1: Winjet Street Series LED Tail Lights installed on a Volkswagen Golf GTI MK4. These lights feature a black housing and smoke lens, enhancing the vehicle's rear aesthetics.
2. Drošības informācija
Brīdinājums: Professional installation is highly recommended for this product. Improper installation can lead to electrical issues, damage to the vehicle, or malfunction of the tail lights, potentially compromising vehicle safety.
- Pirms jebkādu elektroinstalācijas darbu uzsākšanas vienmēr atvienojiet transportlīdzekļa akumulatoru.
- Pārliecinieties, vai visi savienojumi ir droši un pareizi izolēti, lai novērstu īssavienojumus.
- Verify that the tail lights function correctly (brake, running, turn signals, reverse) before driving.
- Ievērojiet visus vietējos un nacionālos noteikumus par transportlīdzekļu apgaismojumu.
3. Iepakojuma saturs
Atverot iepakojumu, lūdzu, pārliecinieties, ka visas sastāvdaļas ir klāt un nav bojātas:
- One (1) Pair of Tail Lights (Left and Right)
- Two (2) Volt Resistors
4. Uzstādīšanas instrukcijas
These Winjet Street Series LED Tail Lights are designed for direct fitment into the factory location of your 1999-2005 Volkswagen Golf GTI MK4, requiring no modifications. However, professional installation is recommended.
Nepieciešamie rīki:
- Basic hand tools (e.g., screwdriver set, socket wrench set)
- Wire strippers/crimpers (if resistors require wiring)
- Elektriskā lente vai termiski sarūkoša caurule
Uzstādīšanas soļi:
- Sagatavošana: Park the vehicle on a level surface and engage the parking brake. Turn off the ignition and disconnect the negative terminal of the vehicle's battery to prevent electrical shorts.
- Access Old Tail Lights: Open the trunk or tailgate. Locate the access panels or retaining screws for the existing tail light assemblies. Remove any covers or fasteners to gain access to the back of the tail light.
- Remove Old Tail Lights: Disconnect the electrical connectors from the old tail light bulbs/assembly. Carefully unbolt or unclip the old tail light assembly from the vehicle body. Gently pull the assembly straight out to avoid damaging paint or bodywork.
- Prepare New Tail Lights: Inspect the new Winjet LED Tail Lights. Ensure the included volt resistors are properly connected or prepared for connection according to the vehicle's wiring system, if necessary.
- Install New Tail Lights: Connect the electrical connectors from the vehicle's wiring harness to the new Winjet LED Tail Light assembly. Ensure a snug and secure connection. If resistors are separate, connect them as per vehicle requirements to prevent hyper-flashing or error codes.
- Uzstādiet jaunus aizmugurējos lukturus: Carefully position the new tail light assembly into the vehicle's opening. Align the mounting points and secure the assembly with the factory bolts or clips. Do not overtighten.
- Atkārtojiet otrai pusei: Follow steps 2-6 for the opposite tail light assembly.
- Testa funkcionalitāte: Reconnect the vehicle's battery. Turn on the ignition (do not start the engine) and test all tail light functions: running lights, brake lights, turn signals (left and right), and reverse lights. Ensure all lights illuminate correctly and without error messages.
- Galīgā pārbaude: Once confirmed operational, ensure all wiring is neatly tucked away and secured. Replace any access panels or covers.
2. attēls. Aizmugure view of the Winjet LED Tail Lights. Note the wiring harness and integrated volt resistors (small black boxes with fans) designed for proper electrical function.
5. Lietošanas instrukcijas
Once properly installed, your Winjet Street Series LED Tail Lights will operate automatically with your vehicle's existing lighting system. They are designed to function as direct replacements for your factory tail lights.
- Gaitas gaismas: These will illuminate when your vehicle's headlights or parking lights are turned on.
- Bremžu lukturi: These will illuminate brighter when the brake pedal is pressed.
- Pagrieziena signāli: The amber section of the tail light will flash when the turn signal lever is activated.
- Atpakaļgaitas lukturi: The white section will illuminate when the vehicle is shifted into reverse gear.
Regularly check all lighting functions to ensure they are working correctly for safe driving.
6. Apkope
Winjet LED Tail Lights are designed for durability and minimal maintenance. Follow these guidelines to ensure their longevity and optimal performance:
- Tīrīšana: Clean the lens with a soft cloth and mild automotive soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the polycarbonate lens material.
- Pārbaude: Periodically inspect the tail light assemblies for any signs of damage, cracks, or moisture intrusion. Ensure all mounting bolts remain secure.
- Elektroinstalācija: Check wiring connections periodically for corrosion or looseness, especially after driving through harsh conditions.
- Aizsardzība pret laikapstākļiem: The lights feature weather sealing to prevent moisture. If you notice condensation inside the housing, inspect the seals for damage.
7. Traucējummeklēšana
If you encounter issues with your Winjet LED Tail Lights, refer to the following common problems and solutions:
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| Gaismas neiedegas | Loose electrical connection, blown fuse, incorrect wiring. | Check all wiring connections. Inspect vehicle's fuse box for blown fuses. Verify wiring against vehicle's electrical diagram. |
| Gaismas mirgo vai ir blāvas | Poor electrical connection, insufficient power, faulty resistor. | Ensure connections are tight. Check vehicle's voltage. Inspect or replace volt resistors if suspected faulty. |
| Hyper-flashing turn signals | Resistor not properly installed or faulty, vehicle's computer detecting low load. | Verify volt resistors are correctly installed and functioning. Consult a professional if the issue persists. |
| Mitrums objektīva iekšpusē | Compromised weather seal, extreme temperature changes. | Small amounts of condensation may dissipate. If persistent or excessive, inspect seals for damage. Contact support if seals are faulty. |
If these steps do not resolve the issue, please contact Winjet customer support.
8. Produkta specifikācijas
| Funkcija | Detaļas |
|---|---|
| Zīmols | Winjet |
| Modeļa numurs | WJ20-0114-05 |
| Transportlīdzekļa saderība | 1999-2005 Volkswagen Golf GTI MK4 |
| Gaismas avota veids | LED |
| Krāsa | Black Housing/Smoke Lens |
| Lēcu materiāls | Polikarbonāts |
| Auto daļas pozīcija | Aizmugure |
| Īpašas funkcijas | Waterproof, DOT Certified Street Legal |
| Voltage | 12 volts |
| Produkta izmēri (G x P x A) | 21 x 17 x 11 collas |
| Preces svars | 7 mārciņas |
| OEM detaļu numuri | 1J6 945 095 F, 1J6 945 096 F |
| UPC | 848524018190, 848063051146 |
9. Informācija par garantiju
Winjet Street Series LED Tail Lights are covered by a viena gada ierobežota garantija no iegādes datuma. Šī garantija attiecas uz ražošanas defektiem un nodrošina, ka produkts normālas lietošanas apstākļos atbilst noteiktajiem veiktspējas standartiem.
For warranty claims or detailed information regarding terms and conditions, please retain your proof of purchase and contact Winjet customer support.
10. Klientu atbalsts
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Winjet customer support. You can find contact information on the official Winjet webvietnē vai ar sava mazumtirgotāja starpniecību.
Winjet is dedicated to providing quality automotive parts and support. For more information about Winjet products and services, visit the Winjet Store on Amazon.
