Gerber Danze DA507348N Ceramic Disc Cartridge Instruction Manual

1. Produkts beidziesview

The Gerber Danze DA507348N is a ceramic disc cartridge designed as a replacement part for various Danze single-handle faucets. This component is crucial for controlling water flow and temperature in compatible faucet models, restoring proper function and preventing leaks.

Image 1: The Gerber Danze DA507348N Ceramic Disc Cartridge. This image displays the blue and white ceramic disc cartridge with its stem, ready for installation into a compatible single-handle faucet.

2. Specifikācijas

• Modeļa numurs: DA507348N
• Veids: Keramikas disku kasetne
• Saderība: Designed for Danze single-handle faucets
• Materiāls: Keramika, Plastmasa
• Izmēri: Aptuveni 2.25 x 1.25 x 1.25 collas
• Preces svars: Apmēram 1.45 unces
• Aizstāj: Danze model DA507048N

3. Compatible Faucet Models

This ceramic disc cartridge is compatible with the following Danze single-handle faucet models:

• D153244, D155040, D201014, D201244, D203112
• D215158, D216454, D216540, D220111, D221040
• D222158, D223140, D223544, D403412, D403512
• D403612, D403712, D403812, D404214, D404444
• D404458, D404854, D405040, D455612, D457015

It also serves as a replacement for the older Danze model DA507048N.

4. Uzstādīšanas instrukcijas

Follow these steps to replace the ceramic disc cartridge in your Danze single-handle faucet. It is recommended to consult your specific faucet's manual for detailed disassembly instructions, as designs may vary.

4.1. Pirms sākat

1. Izslēdziet ūdens padevi: Locate the hot and cold water shut-off valves under the sink and turn them clockwise until fully closed. Open the faucet handle to relieve any remaining water pressure.
2. Apkopojiet rīkus: You may need a flathead screwdriver, Phillips head screwdriver, Allen (hex) wrench (often 2.5mm), channel lock pliers, and plumber's grease.

4.2. Removing the Old Cartridge

1. Noņemiet jaucējkrāna rokturi: Typically, there is a small decorative cap or plug on the handle that conceals a set screw. Carefully pry off the cap and use the appropriate screwdriver or Allen wrench to loosen the set screw. Once loose, pull the handle straight up and off.
2. Access the Cartridge: Remove any decorative trim rings or covers to expose the cartridge housing.
3. Remove Locking Collar/Nut: The cartridge is usually secured by a threaded collar or nut. This may require channel lock pliers. Turn it counter-clockwise to loosen and remove. Be careful not to damage the threads.
4. Izņemiet veco kasetni: Carefully pull the old cartridge straight out. Note its orientation for reference.
5. Pārbaudiet O veida gredzenus: Ensure that all old O-rings (often three connected in a 'Mickey Mouse ears' shape) are removed from the faucet body. If they remain, the new cartridge will not fit correctly. Clean any grit or mineral buildup from the cartridge housing.

4.3. Installing the New Cartridge

1. Ieeļļot (pēc izvēles): Apply a small amount of plumber's grease to the O-rings on the new cartridge for easier installation and better sealing.
2. Ievietojiet jaunu kasetni: Align the new DA507348N cartridge with the faucet body, ensuring it is seated correctly. Push it firmly into place.
3. Secure Locking Collar/Nut: Reinstall the locking collar or nut, turning it clockwise to tighten. Do not overtighten, but ensure it is snug.
4. Salieciet jaucējkrānu atpakaļ: Replace any decorative trim rings and then the faucet handle. Tighten the set screw to secure the handle.
5. Atjaunot ūdensapgādi: Slowly turn the hot and cold water shut-off valves back on.
6. Testa krāns: Check for leaks and verify proper water flow and temperature control.

Image 2: Genuine Gerber Replacement Parts. This logo signifies the authenticity and quality of Gerber replacement components, ensuring optimal product performance.

5. Apkope

Proper maintenance can extend the life of your faucet and cartridge.

• Regulāra tīrīšana: Periodically clean faucet components, including the cartridge housing, to prevent mineral buildup. Products like CLR (Calcium, Lime, Rust remover) can be used for this purpose.
• Eļļošana: If the handle operation becomes stiff, disassemble the handle and cartridge, clean the components, and apply fresh plumber's grease to the O-rings and moving parts of the cartridge.
• Ziemošana: In outdoor faucet applications, ensure the water supply is completely shut off and the faucet is drained during winter months to prevent O-ring damage from freezing.

6. Traucējummeklēšana

7. Informācija par garantiju

Gerber products, including this ceramic disc cartridge, are typically backed by a limited lifetime warranty against manufacturing defects. For specific terms and conditions, please refer to the warranty documentation provided with your original Danze faucet or contact Gerber customer support.

8. Klientu atbalsts

For technical assistance, installation questions, or warranty claims, please contact Gerber customer support. Contact information can typically be found on the official Gerber webvietnē vai dokumentācijā, kas pievienota jūsu produktam.

You can also visit the official Gerber webvietne, lai iegūtu vairāk informācijas: Gerber Store on Amazon