DISH DISH211 4-Device Universal Remote User Manual

Ievads

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your DISH DISH211 4-Device Universal Remote. Designed for ease of use, this remote supports DISH TV receivers and can control up to four different devices, including TVs and other entertainment systems. Its ability to learn commands from original remotes makes it a versatile replacement.

Figure 1: The DISH DISH211 4-Device Universal Remote, showcasing tā ergonomisko dizainu un pogu izkārtojumu.

Iestatīšana

1. Akumulatora uzstādīšana

The DISH211 remote requires two (2) AA batteries for operation. To install:

1. Atrodiet bateriju nodalījumu tālvadības pults aizmugurē.
2. Slide the battery cover downwards and lift to open.
3. Ievietojiet divas AA baterijas, pārliecinoties, ka pozitīvie (+) un negatīvie (-) spailes ir saskaņotas ar indikatoriem nodalījuma iekšpusē.
4. Replace the battery cover by sliding it upwards until it clicks into place.

2. Device Pairing and Programming

The DISH211 remote can be programmed to control your DISH receiver and other devices. It supports both Infrared (IR) and Ultra High Frequency (UHF) communication, depending on your receiver model.

Figure 2: Cover of the official DISH Remote User Guide, which provides detailed programming instructions.

For DISH Receiver Pairing (UHF/IR):

Some DISH receivers may require setting the remote's address and communication type (UHF or IR). A small switch near the battery compartment may allow selection between UHF and IR modes. Ensure this switch is set correctly for your receiver type.

To address the remote to your receiver:

1. Nospiediet pogu Sistēmas informācija button on the front of your receiver to access the system information screen.
2. Nospiediet un turiet SAT button on the remote until all mode lights illuminate.
3. Enter a number between 1-15 on the remote keypad. This number corresponds to the TV-2 UHF address displayed on your receiver's screen.
4. Nospiediet pogu # (pound) button once.
5. Nospiediet pogu Ieraksts pogu trīs reizes.
6. Izvēlieties Gatavs on the system info screen and test the remote's functionality.

For Other Devices (TV, DVD, AUX):

The remote has a large code library and can learn commands from your original remotes. Refer to the official DISH remote user guide (often included with the product or available online) for specific programming codes and learning instructions for various brands and device types.

Figure 3: The back of the DISH remote packaging, indicating compatible DISH receiver models for both IR and IR/UHF configurations.

Lietošanas instrukcijas

The DISH211 remote is designed for intuitive control of your entertainment system. It features backlit active MODE keys for visibility in low light conditions and dedicated DVR controls.

1. Režīmu izvēle

Press the desired mode button (e.g., SAT for DISH receiver, TV televīzijas vajadzībām, DVD for DVD player, AUX for auxiliary device) at the top of the remote to select the device you wish to control. The selected mode button will illuminate.

2. Pamata vadības ierīces

• Jauda: Nospiediet pogu SPĒKS pogu, lai ieslēgtu vai izslēgtu izvēlēto ierīci.
• Apjoms: Izmantojiet SKAĻUMU PALIELINĀT/LEJUMS buttons to adjust the audio level of your television.
• Kanāls: Izmantojiet KANĀLS UZ AUGŠU/LEJU buttons to change channels on your DISH receiver or television.
• Izslēgt skaņu: Nospiediet pogu Klusināt pogu, lai apklusinātu skaņu.
• Ievade: Nospiediet pogu IEVADE button to cycle through video inputs on your television.

3. DVR Controls

The remote includes dedicated buttons for DVR functionality:

• Ieraksts: Initiates recording of the current program.
• Atskaņot/pauzēt: Starts or pauses playback of recorded content or live TV.
• Pietura: Aptur atskaņošanu.
• Attīt/ātrīt uz priekšu: Controls playback speed and direction.
• Skip Forward (DISH Skip Forward): Allows quick skipping through commercials or segments.
• Izlaist atpakaļ: Skips backward in recorded content.

4. attēls: Tuvplāns view of the DISH DISH211 remote, highlighting the central navigation and DVR control buttons.

Apkope

1. Akumulatora nomaiņa

When the remote's performance degrades or buttons become unresponsive, it is likely time to replace the batteries. Follow the battery installation steps outlined in the Setup section.

2. Tīrīšana

To clean your remote, gently wipe the surface with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using excessive liquid or harsh chemicals, as these can damage the remote's electronics or finish.

Problēmu novēršana

Tālvadības pults nereaģē

• Pārbaudiet akumulatorus: Pārliecinieties, vai baterijas ir pareizi ievietotas un tām ir pietiekams uzlādes līmenis. Nomainiet, ja nepieciešams.
• Redzes līnija (IR): If using IR mode, ensure there is a clear line of sight between the remote and the device's IR receiver. Obstructions can block the signal.
• Režīma izvēle: Verify that the correct mode button (e.g., SAT, TV) is selected for the device you are trying to control.
• Remote Address/UHF-IR Switch: For DISH receivers, confirm the remote's address is correctly set and the UHF/IR switch (if present) matches your receiver's configuration. Incorrect settings can prevent communication.

Intermitējoša funkcionalitāte

• Traucējumi: Other electronic devices or strong light sources (like plasma TV IR interference) can sometimes interfere with IR signals. Try operating the remote from a different angle or location.
• DVR Directory Update: If experiencing lag or unresponsiveness with DVR functions, ensure your DVR's directory is updated. Consult your DISH receiver's manual for instructions on updating its software or directory.

Pogas nedarbojas

• Tīra tālvadības pults: Dirt or debris under buttons can cause them to stick or become unresponsive. Clean the remote as described in the Maintenance section.
• Reprogram: If specific buttons for a device are not working, the remote may need to be reprogrammed for that device.

Specifikācijas

Garantija un atbalsts

Garantijas informācija

The DISH DISH211 Universal Remote typically comes with a Ierobežota 90 dienu garantija. Please refer to the documentation enclosed with your product for specific terms, conditions, and details regarding warranty claims.

Klientu atbalsts

For further assistance with programming, troubleshooting, or general inquiries, it is recommended to consult the official DISH Network support resources. This may include their website, online user guides, or customer service contact information. The manufacturer of this product is Audiovox Accessories Corporation.