1. Produkts beidziesview
The Planet IGS-801M is an 8-Port 10/100/1000Base-TX Industrial SNMP Switch designed for robust network connectivity in harsh environments. Featuring an IP30 aluminum case, it supports a wide operating temperature range from -40 to 75 degrees Celsius, making it suitable for industrial applications requiring high reliability and performance.
1. attēls. Priekšpuse view of the IGS-801M Industrial SNMP Switch. This image displays the compact, rugged design with eight Gigabit Ethernet ports and status LEDs for power, fault, link, and activity.
2. Galvenās iezīmes
- 8 portu gigabitu Ethernet: Provides 8 x 10/100/1000Base-TX RJ45 ports for high-speed network connections.
- Rūpnieciskās klases dizains: IP30 rated aluminum case for protection against dust and harsh conditions.
- Plaša darba temperatūra: Operates reliably in extreme temperatures from -40°C to 75°C (-40°F to 167°F).
- SNMP Management: Supports Simple Network Management Protocol for remote monitoring and management.
- DIN-Rail and Wall-Mountable: Flexible installation options for various industrial environments.
- Liekā jaudas ievade: Features dual DC power inputs for enhanced reliability.
- Augsta veiktspēja: Non-blocking wire-speed forwarding for optimal data throughput.
3. Iestatīšanas rokasgrāmata
3.1. Iepakojuma saturs
Pirms turpināt instalēšanu, lūdzu, pārliecinieties, vai jūsu iepakojumā ir iekļauti šādi priekšmeti:
- IGS-801M Industrial SNMP Switch
- Ātrās uzstādīšanas rokasgrāmata
- DIN sliedes montāžas komplekts
- Terminal block connector for power input
3.2. Fiziskā uzstādīšana
The IGS-801M can be installed on a standard DIN-rail or mounted on a wall. Ensure the installation location is well-ventilated and within the specified operating temperature range.
- DIN sliedes montāža: Attach the DIN-rail clip to the rear of the switch. Hook the top of the clip onto the DIN-rail and push the bottom until it snaps into place.
- Sienas montāža: Use the provided wall-mount brackets (if applicable) and screws to secure the switch to a flat surface. Ensure adequate clearance for cabling and ventilation.
2. attēls: Leņķis view of the IGS-801M, showing the Ethernet ports and the removable terminal block for power input at the top.
3.3 Strāvas pieslēgums
The IGS-801M supports redundant DC power inputs. Connect your power source(s) to the terminal block connector located on the top of the switch. Ensure correct polarity (V+ to positive, V- to negative, and Ground to ground). The input voltage range is typically 12-48V DC, but refer to the product label for exact specifications.
- Connect the power wires to the appropriate terminals on the removable terminal block.
- Insert the terminal block into the power input slot on the switch.
- Once power is supplied, the P1 and/or P2 LEDs on the front panel should illuminate.
3.4 Tīkla savienojums
Connect your network devices (e.g., computers, servers, other switches) to the RJ45 Ethernet ports on the front panel using standard Cat5e/6 Ethernet cables. The switch supports auto MDI/MDI-X, so straight-through or crossover cables can be used interchangeably.
- Insert one end of the Ethernet cable into an available port on the IGS-801M.
- Connect the other end of the cable to your network device.
- The corresponding LNK/ACT LED for that port will illuminate when a valid link is established and blink to indicate activity.
4. Darbība
4.1. LED indikatori
The front panel of the IGS-801M features several LED indicators to provide status information:
- P1 / P2 (Green): Indicates power status for power input 1 and 2. Lit when power is supplied.
- KĻŪME (Sarkans): Indicates a system fault or power failure. Lit when an issue is detected.
- LNK/ACT (Green for each port):
- Vienmērīgi zaļš: Ir izveidots derīgs tīkla savienojums.
- Mirgojošs zaļš: Portā notiek datu aktivitāte.
- 1000 (Green for each port): Indicates Gigabit (1000Mbps) connection speed.
- 100 (Green for each port): Indicates Fast Ethernet (100Mbps) connection speed.
4.2 Tīkla pamatkonfigurācija
The IGS-801M is a managed switch, supporting SNMP for advanced network management. For initial setup and basic configuration, you may need to connect to the switch via its web-based interface or console port (if available). Refer to the full user manual or the Quick Installation Guide for detailed instructions on accessing and configuring the switch's management features, including IP address assignment, VLANs, QoS, and security settings.
By default, the switch may obtain an IP address via DHCP or have a static default IP address. Consult the product documentation for the default IP and login credentials.
5. Apkope
Regular maintenance helps ensure the longevity and optimal performance of your IGS-801M switch.
- Tīrīšana: Periodiski notīriet slēdža ārpusi ar mīkstu, sausu drānu. Nelietojiet šķidrus vai aerosola tīrīšanas līdzekļus. Pārliecinieties, vai ventilācijas atveres ir tīras no putekļiem un gružiem.
- Programmaparatūras atjauninājumi: Check the Planet Technology website regularly for firmware updates. Keeping the firmware up-to-date can improve performance, add new features, and address security vulnerabilities.
- Vides monitorings: Lai novērstu bojājumus, nodrošiniet, lai darba vide atbilstu norādītajam temperatūras un mitruma diapazonam.
- Kabeļu vadība: Pārliecinieties, vai visi tīkla un strāvas kabeļi ir droši pievienoti un pareizi izvietoti, lai novērstu nejaušu atvienošanos vai bojājumus.
6. Traucējummeklēšana
This section provides solutions to common issues you might encounter with the IGS-801M switch.
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| No Power (P1/P2 LEDs off) | No power supply, incorrect wiring, faulty power adapter. | Verify power source connection and voltage. Check terminal block wiring for correct polarity. Test with a known good power adapter. |
| No Link (LNK/ACT LED off) | Incorrect cable, faulty cable, device not powered on, port disabled. | Ensure Ethernet cable is properly connected at both ends. Try a different cable. Verify the connected device is powered on and functioning. Check switch configuration if ports are managed. |
| Lēns tīkla ātrums | Cable quality, network congestion, duplex mismatch. | Ensure Cat5e/6 cables are used for Gigabit speeds. Check for excessive network traffic. Verify duplex settings on connected devices match the switch. |
| FAULT LED is lit | Power input issue, internal hardware fault. | Check both power inputs (P1 and P2). If the issue persists, contact technical support. |
7. Tehniskās specifikācijas
| Funkcija | Specifikācija |
|---|---|
| Modelis | IGS-801M |
| Ostas | 8 x 10/100/1000Base-TX RJ45 |
| Datu pārsūtīšanas ātrums | 1000 megabiti sekundē |
| Darba temperatūra | -40°C līdz 75°C (-40°F līdz 167°F) |
| Korpuss | IP30 Industrial Aluminum Case |
| Strāvas padeve | Redundant DC (Voltage range typically 12-48V DC) |
| Izmēri (G x P x A) | 1.1 x 9.7 x 6.5 collas (aptuveni) |
| Preces svars | 1.04 mārciņas (472 grami) |
| Ražotājs | PLANĒTA |
8. Garantija un atbalsts
For detailed warranty information, please refer to the warranty card included with your product or visit the official Planet Technology webvietne. Garantijas noteikumi un nosacījumi var atšķirties atkarībā no reģiona un produkta.
For technical support, product inquiries, or service requests, please contact Planet Technology's customer support. You can typically find contact information on their official webvietnē vai produkta pilnajā dokumentācijā.
Note: This manual provides general guidance. For comprehensive details and advanced configurations, please refer to the complete user manual available on the manufacturer's webvietne.
