Orbit 94162 Buddy Digital Automatic Watering Timer

Ievads

The Orbit 94162 Buddy Digital Automatic Watering Timer is designed to automate garden watering tasks, providing consistent irrigation for micro-jets, drip irrigation systems, and garden sprinklers. This manual provides instructions for the proper installation, programming, operation, and maintenance of your watering timer.

Produkts beidziesview

1. attēls. Priekšpuse view of the Orbit 94162 Buddy Digital Automatic Watering Timer, showing the digital display, control buttons, and rotary dial.

This digital watering timer features a user-friendly interface with a large LCD display, intuitive control buttons, and a rotary dial for selecting various programming functions. It is equipped with a diaphragm solenoid valve for reliable and long-lasting performance.

Uzstādīšana un iestatīšana

1. Akumulatora uzstādīšana

1. Ensure the timer is in the 'OFF' position.
2. Atrodiet bateriju nodalījumu taimera aizmugurē.
3. Open the compartment and insert two (2) AA alkaline batteries, observing the correct polarity (+/-).
4. Close the battery compartment securely. The display should illuminate.

2. Piestiprināšana pie krāna

Figure 2: The watering timer connected to a standard garden faucet with a hose attached.

1. Thread the timer onto any standard outdoor garden faucet. Hand-tighten only. Do not use tools.
2. Attach your garden hose or irrigation system to the outlet of the timer.
3. Turn on the faucet completely. The timer is designed to operate with full water pressure.

Svarīgi: When freezing temperatures are expected, timers must be removed from hose faucets to prevent potential freezing damage.

Programmēšana un darbība

3. attēls: Tuvplāns view of the timer's rotary dial and digital display, showing various programming options.

The timer features a rotary dial with several settings for easy programming:

• IESTATĪT PULKSTENI: Pielāgojiet pašreizējo laiku.
• SĀKUMA LAIKS: Set the desired time for watering to begin.
• CIK ILGI: Determine the duration of each watering cycle.
• CIK BIEŽI: Specify the frequency of watering cycles.
• AUTOMĀTIS: Activates the programmed watering schedule.
• IZSLĒGTS: Izslēdz visu laistīšanu.

1. Set Current Time (SET CLOCK)

1. Turn the dial to 'SET CLOCK'.
2. Use the '+' and '-' buttons to adjust the hour. Press the '+' or '-' button to change the value. Hold the button for faster adjustment.
3. Press the 'MANUAL' button to switch between AM/PM.
4. Lai pielāgotu minūtes, izmantojiet pogas '+' un '-'.
5. Turn the dial to the next setting or 'AUTO' to save.

2. Set Start Time (START TIME)

1. Turn the dial to 'START TIME'.
2. Use the '+' and '-' buttons to set the desired time for watering to begin.
3. Press the 'MANUAL' button to switch between AM/PM.
4. Turn the dial to the next setting or 'AUTO' to save.

3. Set Watering Duration (HOW LONG)

1. Turn the dial to 'HOW LONG'.
2. Use the '+' and '-' buttons to set the watering duration from 1 to 240 minutes.
3. Turn the dial to the next setting or 'AUTO' to save.

4. Set Watering Frequency (HOW OFTEN)

1. Turn the dial to 'HOW OFTEN'.
2. Use the '+' and '-' buttons to set the watering frequency. Options include every 6 hours, every 12 hours, or every 1 to 7 days.
3. Turn the dial to 'AUTO' to save and activate the program.

5. Automatic Operation (AUTO)

Once all settings are programmed, turn the dial to 'AUTO'. The timer will now operate according to your set schedule. The display will show the current time and the next scheduled watering cycle.

6. Manuāla darbība

To water manually, press the 'MANUAL' button. Use the '+' and '-' buttons to set the desired manual watering duration. Press 'MANUAL' again to start watering. To stop manual watering, press 'MANUAL' again or turn the dial to 'OFF'.

7. Lietus kavēšanās

To activate a rain delay, press and hold the '+' button while the dial is in the 'AUTO' position. This will pause the watering schedule for a set period (e.g., 24, 48, 72 hours). Press the '+' button repeatedly to cycle through delay options. The timer will resume its schedule automatically after the delay period.

Apkope

Akumulatora nomaiņa

Replace batteries annually or when the low battery indicator appears on the display. Always use fresh AA alkaline batteries. Remove old batteries promptly to prevent leakage.

Tīrīšana

Notīriet taimera ārpusi ar reklāmuamp drānu. Nelietojiet abrazīvus tīrīšanas līdzekļus un neiegremdējiet ierīci ūdenī.

Ziemošana

Before the first frost, disconnect the timer from the faucet and drain any remaining water. Store the timer indoors in a dry, protected area where temperatures will not drop below freezing. Removing batteries during storage is recommended.

Problēmu novēršana

• Nav ūdens plūsmas:
  • Ensure the faucet is fully open.
  • Pārbaudiet akumulatora līmeni un, ja nepieciešams, nomainiet to.
  • Verify the timer is in 'AUTO' mode or manual watering is activated.
  • Check for debris in the timer's inlet filter.
• Timer not watering at scheduled time:
  • Confirm the current time and start time are set correctly.
  • Pārliecinieties, vai taimeris ir režīmā “AUTO”.
  • Check if a rain delay is active.
  • Verify battery power.
• Noplūde no savienojumiem:
  • Ensure all connections are hand-tightened securely.
  • Check the rubber washer inside the timer's inlet for proper seating and damage. Replace if necessary.
• Displejs ir tukšs vai blāvs:
  • Replace batteries with fresh AA alkaline batteries.

Specifikācijas

Garantijas informācija

Sīkāku informāciju par garantiju skatiet ražotāja oficiālajā dokumentācijā. website or the warranty card included with your product packaging. Keep your purchase receipt as proof of purchase for any warranty claims.

Klientu atbalsts

Should you require technical assistance, have questions regarding product operation, or need to report an issue, please contact Orbit customer support. Contact details can typically be found on the Orbit webvietne vai produkta iepakojums.