CLOVER D1-K

CLOVER D1-K Hot and Cold Countertop Bottleless Water Cooler Instruction Manual

Ievads

Thank you for choosing the CLOVER D1-K Hot and Cold Countertop Bottleless Water Cooler. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new water dispenser. Please read all instructions carefully before use and retain this manual for future reference.

Svarīga drošības informācija

Lietojot elektriskās ierīces, vienmēr ievērojiet pamata drošības pasākumus, lai samazinātu ugunsgrēka, elektriskās strāvas trieciena un miesas bojājumu risku.

Iepakojuma saturs

Your CLOVER D1-K water cooler package includes:

Specifikācijas

ModelisD1-K
Produkta veidsHot and Cold Countertop Bottleless Water Dispenser
Produkta izmēri10.7 cm platums x 16.8 cm dziļums x 17.2 cm augstums
Produkta svarsNet: 26 lbs, Gross: 31 lbs
Produkta krāsaMelns un Sudrabs
Elektriskie110V kontaktligzda
Aukstumaģenta tipsR134a
Kompresora tipsLG
SertifikātiUL
Ūdens temperatūraKarsts un Auksts
Cold Water Rate0.6 GAL of 50°F/HR
Hot Water Rate1.8 GAL of 185°F/HR
Cold Water ThermostatRegulējams no 32°F līdz 50°F
Karstā ūdens termostatsControlled to 185°F
Built-In Filtration System
Filtra dzīve750 gallons or 12 months
Novērtēts Energy Star

Iestatīšana

1. izvietošana

Place the water cooler on a flat, stable countertop. Ensure there is at least 4 inches of clearance from walls to allow for proper ventilation and efficient operation. The unit dimensions are 10.7"W x 16.8"D x 17.2"H, designed to fit under standard cabinets.

Clover D1-K Water Cooler with dimensions labeled
Figure 1: CLOVER D1-K Water Cooler with labeled dimensions (10.7"W x 16.8"D x 17.2"H).

2. Ūdensvada pieslēgums

This bottleless water cooler connects directly to your existing plumbing. The package includes all necessary installation hardware and water line for a basic setup. Follow the detailed instructions provided with the installation kit to connect the water line to a cold water source.

Iekšējā view of the Clover D1-K water cooler showing tanks and filtration system
Figure 2: Internal components of the CLOVER D1-K, including stainless steel tanks and filter housing.

3. Initial System Flush

Before first use, it is crucial to flush the system to remove any air or carbon fines from the new filter. Once the water line is connected and the water supply is turned on, dispense several cups of water from both the hot and cold faucets until the water runs clear and free of air bubbles. This ensures optimal water quality and taste.

Lietošanas instrukcijas

1. Ūdens padeve

The CLOVER D1-K features easy-to-use push faucets for dispensing water. The unit provides both hot and cold water.

Priekšpuse view of the Clover D1-K water cooler with hot and cold water faucets
3. attēls. Priekšpuse view of the CLOVER D1-K, highlighting the hot and cold water dispensing areas and the hot water safety lock.

2. Fast Fill Rate

The dispenser offers a fast fill rate, capable of dispensing 16 oz in under 8 seconds. The deep fill area accommodates large sport bottles and containers.

Apkope

1. Tīrīšana

The CLOVER D1-K water dispenser requires minimal maintenance. The removable drip tray is made of ABS plastic and is dishwasher safe for easy cleaning. Regularly wipe down the exterior with a soft, damp audums.

2. Filtra nomaiņa

The built-in filtration system ensures clean, fresh water. The filter cartridge (2H-L) has a life of approximately 750 gallons or 12 months, whichever comes first. Refer to the filter replacement instructions provided with your replacement filter for detailed steps.

Problēmu novēršana

If you experience issues with your CLOVER D1-K water cooler, please consult the following common problems and solutions:

Garantija

The CLOVER D1-K Hot and Cold Countertop Bottleless Water Cooler comes with a 1 gada garantija detaļām un a 3 gadu garantija kompresoram no iegādes datuma. Lūdzu, saglabājiet pirkuma apliecinājumu garantijas prasību iesniegšanai. Šī garantija attiecas uz materiālu un izgatavošanas defektiem normālas lietošanas apstākļos.

Atbalsts

For further assistance, technical support, or to inquire about replacement parts, please contact CLOVER customer service. Refer to the contact information provided on the product packaging or the official CLOVER webvietne.