Seiko Pyxis Alarm Clock NR435W User Manual

Ievads

Thank you for choosing the Seiko Pyxis Alarm Clock NR435W. This manual provides detailed instructions for setting up, operating, and maintaining your new alarm clock. Please read this manual thoroughly before use to ensure proper function and longevity of your device.

Produkts beidziesview

Familiarize yourself with the various parts of your Seiko Pyxis Alarm Clock.

1. attēls. Priekšpuse View of the Alarm Clock. This image displays the clock face, which features analog hour, minute, and second hands, along with an alarm setting hand. Below the clock face are buttons for melody selection and volume control.

2. attēls: sāni View with Alarm Switch. The right side of the clock features a prominent slide switch labeled 'ON' and 'OFF' for activating or deactivating the alarm function.

3. attēls. Aizmugure View ar akumulatora nodalījumu. The rear of the clock houses the battery compartment, which requires 3 AA batteries, and a speaker grille for the alarm melodies.

Galvenās sastāvdaļas:

• Atlikšanas poga: Large button located on the top of the clock.
• Signalizācijas IESLĒGŠANAS/IZSLĒGŠANAS slēdzis: Slide switch on the right side of the clock.
• Laika iestatīšanas poga: Located on the back (often combined with alarm setting).
• Melody Group Selector: Button on the front, typically on the left.
• Melody Selector / Monitor Button: Button on the front, typically in the middle.
• Skaļuma kontrole: Rotary knob on the front, typically on the right.
• Akumulatoru nodalījums: Located on the back.

Iestatīšana

1. Ievietojiet baterijas

1. Open the battery compartment cover on the back of the clock (refer to Figure 3).
2. Insert 3 AA batteries, ensuring correct polarity (+/-). The clock comes with batteries included.
3. Droši aizveriet akumulatora nodalījuma vāku.
4. Observe the second hand on the clock face; it should begin moving, indicating the clock is powered.

2. Set Current Time

1. Locate the time setting knob on the back of the clock. This knob typically has two positions.
2. Gently pull the knob outwards. This usually engages the time-setting mechanism.
3. Rotate the knob to move the hour and minute hands to the current time.
4. Once the time is set, push the knob back inwards to secure the setting.

Lietošanas instrukcijas

1. Modinātāja laika iestatīšana

1. Locate the alarm setting hand on the clock face. This is usually a smaller, distinct hand.
2. The same knob used for setting the current time is often used for setting the alarm. Gently pull the knob outwards to its second position (if applicable) or rotate it while it's in the time-setting position to move the alarm hand.
3. Rotate the knob until the alarm hand points to your desired wake-up time.
4. Push the knob back inwards to secure the alarm setting.
5. Piezīme: As this is a 12-hour analog clock, the alarm will sound twice within a 24-hour period (e.g., if set for 7:00, it will sound at 7:00 AM and 7:00 PM). Remember to activate/deactivate the alarm as needed.

2. Signalizācijas aktivizēšana/deaktivizēšana

• Locate the Alarm ON/OFF slide switch on the right side of the clock (refer to Figure 2).
• To activate the alarm, slide the switch to the 'ON' (upper) position. The alarm will sound at the set time.
• To deactivate the alarm, slide the switch to the 'OFF' (lower) position. The alarm will not sound.
• Svarīgi: If you use the alarm daily, remember to slide the switch to 'ON' each evening to ensure it wakes you the next morning.

3. Atlikšanas funkcijas izmantošana

• When the alarm sounds, press the large Snooze button on the top of the clock.
• The alarm will temporarily stop and sound again after a few minutes (typically 5-10 minutes).
• You can repeat this process multiple times.
• To completely turn off the alarm, slide the Alarm ON/OFF switch to the 'OFF' position.

4. Selecting Melodies and Adjusting Volume

• Melody Group Selection: Use the button on the front left (often labeled with musical notes or moods) to switch between different groups of melodies.
• Individual Melody Selection / Monitor: Use the blue button in the middle of the front panel. Pressing this button will play the next melody within the selected group. The last melody played will be the one used for the alarm. You can also use this button to monitor the alarm sound.
• Skaļuma kontrole: Rotate the knob on the front right (labeled 'Volume' or with 'Min/Max' indicators) to adjust the alarm sound level. To test the volume, first select a melody using the monitor button, then adjust the knob while the melody is playing.

Apkope

1. Akumulatora nomaiņa

• When the clock's second hand stops moving or the alarm sound becomes weak, it's time to replace the batteries.
• Atveriet bateriju nodalījumu pulksteņa aizmugurē.
• Remove the old batteries and dispose of them responsibly according to local regulations.
• Ievietojiet 3 jaunas AA baterijas, nodrošinot pareizu polaritāti.
• Aizveriet akumulatora nodalījumu.
• Reset the current time and alarm time after replacing batteries.

2. Tīrīšana

• Noslaukiet pulksteņa ārpusi ar mīkstu, sausu drānu.
• Nelietojiet abrazīvus tīrīšanas līdzekļus, šķīdinātājus vai ķīmiskos aerosolus, jo tie var sabojāt apdari.
• Avoid getting moisture into the clock's internal components.

Problēmu novēršana

Specifikācijas

Figure 4: Size Reference. This image illustrates the compact size of the alarm clock, demonstrating its portability and suitability for various surfaces.

Garantija un atbalsts

For warranty information or technical support, please refer to the official Seiko website or contact your local authorized Seiko dealer. Keep your purchase receipt as proof of purchase.

Official Seiko Webvietne: www.seikoclocks.com