Behringer EUROLIVE VQ1800D aktīvās PA zemfrekvences skaļruņa lietošanas instrukcija

1. Ievads

This manual provides essential information for the safe and efficient operation of your Behringer EUROLIVE VQ1800D Active PA Subwoofer. Please read this manual thoroughly before operating the device to ensure proper setup, usage, and maintenance. Retain this manual for future reference.

1.1. attēls: priekšpuse view of the Behringer EUROLIVE VQ1800D Active PA Subwoofer.

2. Drošības instrukcijas

Lai samazinātu elektriskās strāvas trieciena, ugunsgrēka vai traumu risku, vienmēr ievērojiet šādus drošības pasākumus:

• Barošanas avots: Pievienojiet ierīci tikai elektrotīklamtage specified on the unit. Ensure the power cable is not damaged and is routed safely to prevent tripping hazards.
• Ventilācija: Do not block ventilation openings. Install the device in a location with adequate airflow to prevent overheating.
• Mitrums un siltums: Do not expose the device to rain, moisture, dripping or splashing liquids. Keep away from direct heat sources or extreme temperatures.
• Izvietojums: Place the subwoofer on a stable, level surface. Avoid placing it in direct sunlight or near strong magnetic fields.
• Dzirdes aizsardzība: Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Use appropriate hearing protection when operating the subwoofer at high volumes.
• Apkope: Do not attempt to service this device yourself. Refer all servicing to qualified service personnel.

3. Iepakojuma saturs

Izpakojot, pārliecinieties, vai ir visas preces:

• 1 x Behringer EUROLIVE VQ1800D Active PA Subwoofer
• 1x strāvas kabelis
• Lietošanas instrukcija (šis dokuments)

4. Iestatīšana

Follow these steps for initial setup of your subwoofer:

4.1. Fiziskā izvietošana

Position the VQ1800D subwoofer on a stable, flat surface, preferably on the floor, to maximize bass response. Ensure there is adequate space around the unit for ventilation.

4.1. attēls: Piemērsample setup with the VQ1800D subwoofer and full-range speakers.

4.2. Savienojumi

The VQ1800D features a built-in stereo crossover, allowing you to connect full-range loudspeakers directly to its outputs.

1. Strāvas pieslēgums: Connect the supplied power cable to the AC inlet on the rear panel of the subwoofer and then to a suitable mains power outlet.
2. Audio ieeja: Connect your audio source (e.g., mixer, audio interface) to the XLR input connectors (INPUT 1 or INPUT 2) on the rear panel.
3. Audio Output (to Full-Range Speakers): If using the built-in stereo crossover, connect your full-range loudspeakers to the XLR output connectors (OUTPUT 1 or OUTPUT 2). These outputs provide a high-pass filtered signal to your main speakers, optimizing their performance.

Image 4.2: Rear panel showing input/output connections and controls.

5. Lietošanas instrukcijas

5.1. Ieslēgšana/izslēgšana

1. Pirms ieslēgšanas pārliecinieties, vai visi savienojumi ir droši.
2. Press the POWER switch on the rear panel to turn the subwoofer on. The power LED will illuminate.
3. To power off, press the POWER switch again.

5.2. Adjusting Volume and Crossover

The VQ1800D features controls for fine-tuning its performance:

• LĪMEŅA kontrole: Adjusts the overall output volume of the subwoofer. Start with a low setting and gradually increase to your desired level.
• BOOST Frequency: Allows you to select a specific frequency range (40 Hz to 90 Hz) to boost for enhanced bass impact.
• HIGH CUT Control: Sets the crossover frequency for the subwoofer (70 Hz to 150 Hz). This determines the upper frequency limit of the subwoofer's output and the lower frequency limit of the signal sent to your full-range speakers via the 'PASS THRU' outputs.
• FĀZES slēdzis: Inverts the phase of the subwoofer's output. Experiment with this setting to achieve optimal bass alignment with your main speakers.
• LIMIT LED: Illuminates when the internal limiter is active, indicating that the signal is too high and clipping may occur. Reduce the input level or the LEVEL control if this LED is constantly lit.

5.1. attēls: Detalizēts view of the control panel for volume, boost, and crossover settings.

6. Apkope

Regular maintenance ensures the longevity and optimal performance of your subwoofer:

• Tīrīšana: Use a soft, dry cloth to clean the exterior of the subwoofer. Do not use abrasive cleaners or solvents.
• Ventilācija: Periodiski pārbaudiet, vai ventilācijas atveres ir tīras no putekļiem un gružiem.
• Uzglabāšana: When not in use for extended periods, store the subwoofer in a dry, cool environment, protected from dust and extreme temperatures.
• Pārbaude: Regularly inspect the power cable and audio cables for any signs of damage. Replace damaged cables immediately.

7. Traucējummeklēšana

If you encounter issues with your VQ1800D subwoofer, refer to the following common troubleshooting steps:

• Nav jaudas: Ensure the power cable is securely connected to both the subwoofer and the power outlet. Check the power switch position and the mains fuse.
• Nav skaņas: Verify that the audio source is active and connected correctly to the subwoofer's inputs. Check the LEVEL control setting. Ensure any connected full-range speakers are also powered on and receiving a signal from the subwoofer's outputs.
• Distorted Sound / LIMIT LED Constantly On: Reduce the input signal level from your audio source or lower the subwoofer's LEVEL control. The LIMIT LED indicates that the amplifier is being overdriven.
• Vāja basa frekvences: Check the PHASE switch setting. Experiment with both positions to find the optimal phase alignment with your main speakers. Ensure the HIGH CUT frequency is set appropriately for your system.

Ja pēc šo darbību veikšanas problēma joprojām pastāv, sazinieties ar kvalificētu servisa personālu.

8. Specifikācijas

9. Garantija un atbalsts

The Behringer EUROLIVE VQ1800D Active PA Subwoofer comes with a limited warranty. For detailed warranty information, product registration, and technical support, please visit the official Behringer webvietnē vai sazinieties ar vietējo izplatītāju.

For further assistance, refer to the contact information provided on the product packaging or the official Behringer support channels.