Corsair Carbide Series 100R Silent Edition Mid Tower Case Instruction Manual

Ievads

The Corsair Carbide Series 100R Silent Edition Mid Tower Case is designed for PC builders seeking a quiet and versatile chassis. This manual provides essential information for the proper installation, operation, and maintenance of your computer case. It features a clean, modern design, sound-damping side panels, and a 3-speed fan controller for optimized cooling and acoustics.

Drošības informācija

• Pirms jebkādu uzstādīšanas vai apkopes darbu veikšanas vienmēr atvienojiet strāvas padevi no sienas kontaktligzdas.
• Handle internal components with care to avoid damage from static electricity. Use an anti-static wrist strap if available.
• Sargājiet mazas detaļas un skrūves no bērniem.
• Nodrošiniet atbilstošu ventilāciju ap korpusu, lai novērstu pārkaršanu.

Korpusa īpašības

The Carbide Series 100R Silent Edition offers a range of features designed for ease of use and performance:

• Clean, Modern Design: An understated aesthetic suitable for various setups.
• Skaņa-Damping Side Panels: Reduces overall PC noise for a quieter operation.
• 3-Speed Fan Controller: Allows adjustment of fan speed for optimal balance between cooling and noise.
• Two 120mm Fans Included: Provides initial cooling for your system.
• USB 3.0 Compatible: Features modern connectivity options on the front panel.
• Easy Installation and Upgradability: Tool-free side door for convenient access to the interior.
• Mātesplates saderība: Supports Mini-ITX, Micro-ATX, and ATX motherboards.

1. attēls: Leņķis view of the Corsair Carbide Series 100R Silent Edition Mid Tower Case, showcasing its clean exterior.

2. attēls: No augšas uz leju view of the front panel, showing USB 3.0 ports, audio jacks, and power/reset buttons.

Figure 3: Close-up of the sound-damping material applied to the interior of a side panel, designed to reduce noise.

Iestatīšanas rokasgrāmata

1. Lietas sagatavošana

1. Novietojiet korpusu uz stabilas, līdzenas virsmas.
2. Remove the side panels by unscrewing the two captive thumb screws at the rear of the case for each panel. Slide the panels backward and lift them off.

Figure 4: A hand unscrewing a thumb screw from the rear of the case, demonstrating the tool-free access feature.

2. Mātesplates uzstādīšana

1. Ievietojiet mātesplates komplektācijā iekļauto I/O aizsargu atverē korpusa aizmugurē.
2. Align your motherboard with the pre-installed standoffs. Additional standoffs may be required depending on your motherboard form factor (ATX, Micro-ATX, Mini-ITX).
3. Nostipriniet mātesplati, izmantojot komplektā iekļautās skrūves.

3. Diska uzstādīšana

The case supports 5.25-inch optical drives, 3.5-inch hard drives, and 2.5-inch solid-state drives.

• 5.25 collu diskdziņi: Remove the front panel bay cover. Slide the drive into the bay until it clicks into place.
• 3.5 collu diskdziņi: Pull out a drive tray from the drive cage. Flex the tray and insert the 3.5-inch drive. Slide the tray back into the cage until it locks.
• 2.5 collu diskdziņi: Secure the 2.5-inch drive to a 3.5-inch drive tray using the provided screws, then slide the tray into the cage.

5. attēls: View of the internal drive bays, showing the removable trays for 3.5-inch and 2.5-inch drives, and the front intake fan.

4. Barošanas avota uzstādīšana

1. Position the power supply unit (PSU) at the bottom rear of the case, ensuring the fan faces downwards (if the case has a bottom vent) or upwards.
2. Secure the PSU to the case using the screws provided with your power supply.

5. Component Installation (Graphics Cards, Expansion Cards)

1. Noņemiet nepieciešamos paplašināšanas slotu pārsegus no korpusa aizmugures.
2. Insert your graphics card or other expansion cards into the appropriate PCIe slots on your motherboard.
3. Secure the cards with the provided screws.

6. attēls: bijušaisample of a fully assembled system inside the case, showing motherboard, CPU cooler, graphics card, and power supply.

6. Kabeļu vadība

Utilize the cutouts and tie-down points on the motherboard tray to route cables behind the tray. This improves airflow and maintains a clean interior appearance.

7. attēls: Leņķisks iekšējais view highlighting the cable routing cutouts and space behind the motherboard tray for cable management.

Darbība

Ventilatora kontrolieris

The Carbide Series 100R Silent Edition includes a 3-speed fan controller located at the rear of the case. This switch allows you to adjust the speed of the connected case fans:

• Zems: For quiet operation and minimal airflow.
• Vidēja: Sabalansēts iestatījums vispārējai lietošanai.
• Augsts: Provides maximum airflow for demanding tasks or higher temperatures.

Figure 8: The 3-speed fan controller switch located on the rear panel of the case.

Priekšējā paneļa porti

Priekšējais panelis nodrošina ērtu piekļuvi:

• Divi USB 3.0 porti
• Austiņu ligzda
• Mikrofona ligzda
• Barošanas poga
• Atiestatīšanas poga

Apkope

Tīrīšana

• Izmantojiet mīkstu, damp cloth to clean the exterior surfaces of the case. Avoid abrasive cleaners.
• For internal cleaning, use compressed air to remove dust from components and fans. Ensure the system is powered off and unplugged.

Putekļu filtru apkope

The case includes dust filters to prevent dust buildup inside. Regularly clean these filters to maintain optimal airflow and cooling performance.

1. Locate the dust filter at the bottom of the case (under the power supply intake).
2. Slide out the filter for cleaning.
3. Clean the filter with water and mild soap, or use compressed air. Ensure it is completely dry before reinserting.

9. attēls: View of the removable dust filter located at the bottom of the case, beneath the power supply area.

Problēmu novēršana

• Sistēma neieslēdzas: Double-check all power connections, including the 24-pin ATX, 8-pin CPU, and front panel power switch headers on the motherboard. Ensure the power supply switch is in the 'ON' position.
• Ventilatori negriežas: Verify that the fans are correctly connected to the fan controller or motherboard headers. Check the fan controller setting.
• Pārmērīgs troksnis: Ensure all screws are tightened, especially on side panels and drive bays. Check fan blades for obstructions. Adjust the fan controller to a lower speed setting.
• Poor airflow/high temperatures: Clean dust filters and internal components. Ensure fans are oriented correctly for optimal airflow (intake/exhaust).

Specifikācijas

Garantija un atbalsts

For technical assistance or warranty inquiries, please contact Corsair customer support.

Corsair Technical Support: 1-888-222-4346 opt #1

Please have your product model number (CC-9011077-WW) and proof of purchase available when contacting support.