Ievads
The Soundstream T1.4000DL is a high-performance Tarantula Series Mono-Block Class D Car Amplifier designed to deliver powerful audio output for your vehicle's sound system. This amplifier features a Pulse Width Modulated MOSFET power supply with Audiophile Grade IRTM Transistors and a 12-point RGB LED lighting system for visual customization. This manual provides essential information for the proper installation, operation, and maintenance of your amppacēlājs, lai nodrošinātu optimālu veiktspēju un ilgmūžību.
Drošības informācija
- Pirms jebkādu elektroinstalācijas darbu veikšanas vienmēr atvienojiet transportlīdzekļa akumulatoru.
- Ensure all wiring is correctly routed and secured to prevent damage or short circuits.
- Use appropriate gauge power and ground wires. A 1/0 gauge wire is recommended for optimal performance and safety.
- Instalējiet ampvietā, kas nodrošina atbilstošu ventilāciju, lai novērstu pārkaršanu.
- Saskaņojiet ar amplifier's impedance to your speakers or subwoofers to prevent damage to either component.
- Lai nodrošinātu optimālu veiktspēju un drošību, ieteicams veikt profesionālu uzstādīšanu.
- Šis produkts var saturēt ķīmiskas vielas, par kurām Kalifornijas štatā ir zināms, ka tās var izraisīt vēzi un iedzimtus defektus vai citus reproduktīvos traucējumus. Pēc apstrādes nomazgājiet rokas.
Iepakojuma saturs
Pārliecinieties, vai iepakojumā ir visi priekšmeti:
- Soundstream T1.4000DL Mono-Block Class D Car Ampdzīvāks
- Tālvadības basa vadības poga
- Montāžas aparatūra
- Lietotāja rokasgrāmata (šis dokuments)
Uzstādīšana un uzstādīšana
Pareiza uzstādīšana ir ļoti svarīga jūsu ierīces veiktspējai un ilgmūžībai ampDzīvotājs. Rūpīgi veiciet šīs darbības:
1. Montāža Ampdzīvāks
Choose a secure location that provides sufficient airflow around the amplifier. Avoid mounting it directly on carpet or in enclosed spaces without ventilation. Use the provided mounting hardware to secure the ampstingri glābējs.
2. Power and Ground Connections
Connect the power cable (1/0 gauge recommended) from the vehicle's battery to the amplifier's B+ terminal. Ensure an inline fuse (not included, but essential) is installed within 18 inches of the battery. Connect a ground cable of the same gauge from the amplifier's GND terminal to a clean, unpainted metal surface on the vehicle chassis. The remote turn-on wire should be connected from your head unit's remote output to the amplifier REM terminālis.
3. Audio ieejas savienojumi
Pievienojiet RCA kabeļus no galvas ierīces priekšpieslēgvietāmamp izvadi uz amplifier's RCA input jacks. Ensure proper left and right channel connections if applicable, though this is a mono-block ampdzīvāks.
4. Speaker/Subwoofer Connections
Pievienojiet zemfrekvences skaļruni(-us) pie amplifier's speaker output terminals. Pay close attention to polarity (+ to + and - to -). Ensure the total impedance of your connected subwoofers matches the amplifier's stable operating impedance (e.g., 1 ohm, 2 ohms, or 4 ohms).
5. Remote Bass Control (Optional)
Plug the remote bass control knob into the designated port on the amplifier. This allows for convenient adjustment of bass levels from the driver's seat.
Attēls: Aizmugure view of the Soundstream T1.4000DL amplifier, highlighting the various input and output terminals for power, ground, remote, RCA audio, and speaker connections.
Lietošanas instrukcijas
1. Sākotnējā ieslēgšana
Kad visi savienojumi ir nostiprināti, pievienojiet transportlīdzekļa akumulatoru. Ieslēdziet automašīnas audiosistēmu. amplifier's power indicator LED (green) should illuminate, indicating it is receiving power and operating normally.
2. Adjusting Gain
Pastiprinājuma vadība uz ampLifier atbilst izejas tilpumamtagjūsu galvenās ierīces e uz amplifier's input. Start with the gain set to minimum. Play a familiar track at about 75% of your head unit's maximum volume. Slowly increase the ampPalieliniet pastiprinājumu, līdz dzirdat kropļojumus, pēc tam nedaudz samaziniet. Tas nodrošina maksimāli tīru skaņu.
3. Krosovera iestatījumi
The T1.4000DL features adjustable crossover settings. For subwoofers, set the Low Pass Filter (LPF) to filter out high frequencies, typically between 80Hz and 120Hz, depending on your subwoofer and personal preference. The Subsonic Filter (SSF) should be set just below your subwoofer's port tuning frequency to protect it from playing frequencies too low.
4. Bass Boost
The bass boost control allows you to enhance low frequencies. Use this sparingly and adjust carefully to avoid distortion and potential damage to your subwoofers.
5. LED indikatori
- Zaļā gaismas diode: Norāda uz ampLifērs ir ieslēgts un darbojas normāli.
- Sarkana LED: Norāda uz amplifier is in protection mode due to a fault (e.g., overheating, short circuit, low impedance).
6. RGB LED apgaismojuma sistēma
The amplifier features a 12-point RGB LED lighting system. A switch on the end panel allows you to change the color to several presets, initiate a slow-motion color change, or rapid flashing random colors. During slow-motion color change, a single color can be selected for custom installations.
Apkope
To ensure the longevity and optimal performance of your Soundstream T1.4000DL amplifier, ievērojiet šīs apkopes vadlīnijas:
- Tīrīšana: Periodiski noslaukiet ampNoslaukiet ierīces ārpusi ar mīkstu, sausu drānu. Izvairieties no spēcīgu ķīmisku vielu vai abrazīvu tīrīšanas līdzekļu lietošanas.
- Ventilācija: Pārliecinieties, ka amplifier's cooling fins are free from dust and debris. Blocked fins can lead to overheating.
- Savienojumi: Regularly check all power, ground, remote, and speaker connections to ensure they are tight and free from corrosion. Loose connections can cause performance issues or damage.
- Elektroinstalācijas pārbaude: Inspect all wiring for signs of wear, fraying, or damage. Replace any compromised wiring immediately.
Problēmu novēršana
Ja rodas problēmas ar savu amplifier, skatiet tālāk norādītās bieži sastopamās problēmas un risinājumus:
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| No Power (No Green LED) | Blown fuse, loose power/ground/remote wire, faulty head unit remote output. | Check inline fuse near battery. Verify all power, ground, and remote connections are secure. Test remote wire for 12V when head unit is on. |
| Aizsardzības režīms (sarkanā gaismas diode) | Overheating, short circuit in speaker wiring, impedance too low, DC offset. | Atļaut ampĻaujiet dzesētājam atdzist. Pārbaudiet skaļruņu vadus, vai nav īssavienojumu. Pārliecinieties, vai skaļruņu pretestība sakrīt. amplifier's stable rating. Disconnect speakers and check if red LED turns off. |
| Nav audio izvades | Loose RCA cables, incorrect gain setting, faulty speakers/subwoofers, head unit issue. | Ensure RCA cables are securely connected. Adjust gain. Test speakers/subwoofers with another amplifier. Check head unit output. |
| Izkropļota skaņa | Gain set too high, improper crossover settings, poor quality audio source, damaged speakers. | Reduce gain. Adjust LPF/SSF settings. Test with a different audio source. Inspect speakers for damage. |
| RCA Inputs Stop Receiving Signal | Damaged RCA inputs, internal amppacēlāja vaina. | Test with new RCA cables. If problem persists, contact customer support for service. |
Specifikācijas
- Modelis: T1.4000DL
- Veids: Mono-Block Class D Car Ampdzīvāks
- RMS jaudas vērtējums:
- 4 ohms: 700 watts x 1 channel
- 2 ohms: 1,300 watts x 1 channel
- 1 ohm: 2,000 watts x 1 channel
- Maksimālā jauda: 4,000 vati
- Barošanas avots: Pulse Width Modulated MOSFET with Audiophile Grade IRTM Transistors
- Rādītāji: LED power (green) and protect (red)
- Izmēri: 22.3 x 11.8 x 3.8 collas
- Svars: 9.9 mārciņas
Garantija un atbalsts
Soundstream products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Soundstream website. If you encounter any issues not covered in this manual or require technical assistance, please contact Soundstream customer support through their official channels.
