1. Ievads
The DigiTech DOD Gonkulator Ring Modulator is a unique guitar effect pedal designed to produce clangy, robotic sounds and aggressive distortion. This updated version offers enhanced flexibility with an adjustable carrier signal control, allowing for a wide range of tonal experimentation from subtle modulation to extreme atonal effects. It also features a built-in distortion circuit to further shape your sound.
2. Galvenās iezīmes
- Adjustable Carrier Signal: Provides precise control over the ring modulation effect.
- Īstais apvedceļš: Ensures your guitar's tone remains pristine when the pedal is disengaged.
- Lighter Aluminum Chassis: Durable and pedalboard-friendly design.
- Aggressive Distortion Circuit: Integrated distortion for signal mangling.
- Neatkarīgas kontroles: Dedicated knobs for Gain, Distortion, Output, Frequency, and Ring.
- Modern 9V DC Power Supply Input: Compatible with standard pedalboard power.
3. Vadības ierīces un funkcijas
The DOD Gonkulator features five control knobs and a footswitch for comprehensive sound shaping.
1. attēls: Augšdaļa view of the DOD Gonkulator Ring Modulator pedal, showing all control knobs and the footswitch.
- IEGŪT: Adjusts the input gain for the distortion circuit.
- DIST (Distortion): Controls the amount of distortion applied to the signal.
- REZULTĀTS: Sets the overall output volume of the pedal.
- FREQ (frekvence): Adjusts the carrier signal frequency for the ring modulation effect. This knob is crucial for tuning the robotic sounds.
- GREDZENS: Controls the blend of the dry signal with the ring modulated signal. Turn clockwise for more ring modulation.
- Kājas slēdzis: Toggles the effect on/off. Features true bypass.
4. Uzstādīšana un savienojumi
Follow these steps to connect your DOD Gonkulator pedal:
- Barošanas avots: Connect a standard 9V DC power adapter (center negative) to the PSU jack on the pedal. The pedal also includes a 9V battery.
- Ievade: Connect your guitar to the "IN" jack on the right side of the pedal using a standard 1/4-inch instrument cable.
- Izvade: Pievienojiet pedāļa kreisajā pusē esošo "OUT" ligzdu savam amplifier's input (or the next pedal in your signal chain) using a standard 1/4-inch instrument cable.
2. attēls: Sāns view of the DOD Gonkulator pedal, highlighting the input and output jacks for connecting to your guitar and ampdzīvāks.
5. Pedāļa darbināšana
The DOD Gonkulator combines ring modulation and distortion effects. Experiment with the controls to find your desired sound.
- Ring Modulation:
- Sāciet ar Gredzens knob at a low setting.
- Pielāgojiet FREQ knob to sweep through different carrier frequencies, creating various robotic and metallic tones.
- Palieliniet Gredzens knob to blend more of the modulated signal.
- Izkropļojumi:
- Izmantojiet GAIN knob to control the input level into the distortion circuit.
- Pielāgojiet DIST knob to set the amount of overdrive/distortion.
- The distortion circuit can be used independently or in conjunction with the ring modulator for unique textures.
- Skaļuma kontrole: Izmantojiet IZEJA knob to match the pedal's volume to your bypassed signal or to provide a boost.
Video 1: Demonstration of the Sonicake Bitcrusher pedal, showcasing various bitcrushing effects. While not the Gonkulator, this video provides an example of digital audio manipulation effects.
Video 2: Another demonstration of the SONICAKE Bitcrusher Guitar Pedal, illustrating its sound capabilities. This video offers insight into similar sound manipulation effects.
6. Apkope
- Keep the pedal clean and free from dust. Use a soft, dry cloth.
- Nepakļaujiet pedāli ekstremālām temperatūrām, mitrumam vai tiešiem saules stariem.
- When not in use for extended periods, disconnect the power supply and remove the 9V battery to prevent leakage.
7. Traucējummeklēšana
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| Nav skaņas, kad pedālis ir nospiests. | Incorrect connections, dead battery, faulty power supply. | Check all cable connections. Replace the 9V battery or try a different power adapter. Ensure the power adapter meets 9V DC (center negative) specifications. |
| Vāja vai kropļota skaņa. | Low battery, incorrect knob settings, faulty cables. | Replace the 9V battery. Adjust GAIN, DIST, and OUTPUT knobs. Test with different instrument cables. |
| Nevēlams troksnis vai dūkoņa. | Ground loop, interference from other electronics, faulty power supply. | Use an isolated power supply. Ensure all cables are properly shielded. Try moving the pedal away from other electronic devices. |
8. Specifikācijas
- Preces svars: 9.9 unces
- Produkta izmēri: 6.63 x 4.25 x 4.81 collas
- Preces modeļa numurs: DOD-GONKULATOR
- Baterijas: Nepieciešams 1x9V akumulators (iekļauts)
- Barošanas avots: Corded Electric (9V DC, center negative)
- Krāsa: Zils
- Signāla formāts: Analogs
- Aparatūras saskarne: 1/4 collu audio
9. Garantija un atbalsts
Lai saņemtu informāciju par garantiju un tehnisko atbalstu, lūdzu, skatiet oficiālo DigiTech vietni. webvietnē vai sazinieties ar pilnvaroto izplatītāju. Saglabājiet pirkuma čeku kā pirkuma apliecinājumu.
Jūs varat apmeklēt DigiTech veikals lai iegūtu vairāk produktu un informācijas.
