Ievads
This manual provides essential instructions for the safe operation, setup, maintenance, and troubleshooting of your AEG SMT 355 Corded Electric Chop Saw. Please read this manual thoroughly before operating the tool to ensure safe and efficient use. Keep this manual for future reference.
The AEG SMT 355 is a powerful corded electric chop saw designed for cutting various materials including metal, stainless steel, and wood, with a maximum cutting depth of 115 mm.
Vispārīgi drošības norādījumi
Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury. This includes, but is not limited to:
- Valkājiet atbilstošus individuālos aizsardzības līdzekļus (IAL), piemēram, aizsargbrilles, dzirdes aizsargus un cimdus.
- Pārliecinieties, ka darba zona ir tīra, labi apgaismota un bez šķēršļiem.
- Neturiet bērnus un apkārtējos cilvēkus darbības zonas tuvumā.
- Nedarbiniet elektroinstrumentus sprādzienbīstamā vidē, piemēram, uzliesmojošu šķidrumu, gāzu vai putekļu klātbūtnē.
- Pirms jebkādu regulēšanas darbu veikšanas, piederumu maiņas vai instrumenta uzglabāšanas vienmēr atvienojiet strāvas kontaktdakšu no strāvas avota.
- Pirms griešanas stingri nostipriniet sagatavi.
- Use only cutting wheels designed for the AEG SMT 355 and suitable for the material being cut.
Produkta sastāvdaļas
Familiarize yourself with the main components of your AEG SMT 355 chop saw.
1. attēls. Priekšpuse view of the AEG SMT 355 Corded Electric Chop Saw, showing the cutting wheel, guard, handle, and base.
2. attēls. Aizmugure view of the AEG SMT 355 Corded Electric Chop Saw, highlighting the motor housing and power cord connection.
3. attēls: Tuvplāns view of the integrated vise and clamping mechanism on the AEG SMT 355, used for securing workpieces.
Uzstādīšana un montāža
- Izpakošana: Carefully remove the chop saw from its packaging. Inspect for any damage that may have occurred during shipping. Report any damage to your retailer immediately.
- Montāža: For stability and safety, it is recommended to securely mount the chop saw to a workbench or a stable stand using appropriate fasteners. Ensure the mounting surface can support the weight of the tool and the forces generated during operation.
- Asmens uzstādīšana (ja nav iepriekš uzstādīta):
- Pārliecinieties, vai instruments ir atvienots no strāvas avota.
- Paceliet asmens aizsargu.
- Nospiediet vārpstas bloķēšanas pogu, lai novērstu vārpstas griešanos.
- Use the provided wrench to loosen and remove the blade retaining nut and outer flange.
- Place the new 355 mm cutting wheel onto the spindle, ensuring the rotation arrow on the blade matches the direction of rotation indicated on the saw.
- Reinstall the outer flange and blade retaining nut. Tighten securely with the wrench while holding the spindle lock.
- Nolaidiet asmens aizsargu.
- Vise Adjustment: The integrated vise can be adjusted to secure various workpiece sizes. Loosen the locking handle, slide the vise jaw to the desired position, and tighten the handle firmly to secure the workpiece.
Lietošanas instrukcijas
- Sagataves sagatavošana:
- Ensure the workpiece is clean and free of debris.
- Mark the cutting line clearly.
- Place the workpiece firmly against the fence and secure it tightly with the vise mechanism. Ensure the workpiece is stable and will not shift during the cut.
- Strāvas pieslēgums: Connect the chop saw to a suitable power outlet (230V, 50Hz). Ensure the power circuit can handle the 2300 Watts power consumption.
- Zāģa palaišana:
- Stingri turiet rokturi.
- Press the trigger switch to start the motor. Allow the blade to reach full speed (3800 RPM) before beginning the cut.
- Griezuma veikšana:
- Slowly and steadily lower the rotating blade into the workpiece. Do not force the cut; let the saw do the work.
- Maintain a consistent downward pressure.
- Once the cut is complete, release the trigger switch and allow the blade to stop rotating completely before raising the saw arm.
- Zāģa apturēšana: Release the trigger switch. The blade will stop rotating. Wait until the blade has completely stopped before moving the workpiece or making any adjustments.
Apkope
Regular maintenance ensures the longevity and safe operation of your chop saw.
- Tīrīšana: After each use, disconnect the power and clean the saw. Remove dust, chips, and debris from the motor vents, blade guard, and base using a brush or compressed air. Do not use solvents that could damage plastic parts.
- Asmeņu pārbaude: Regularly inspect the cutting wheel for wear, cracks, or damage. Replace worn or damaged blades immediately. Ensure the blade is always sharp and suitable for the material being cut.
- Vise and Clamp: Keep the vise mechanism clean and lubricated to ensure smooth operation.
- Strāvas vads: Inspect the power cord for any signs of damage, cuts, or fraying. If damaged, have it repaired by a qualified technician.
- Oglekļa sukas: The motor's carbon brushes may need periodic inspection and replacement. Refer to a qualified service center for this procedure if you notice reduced power or excessive sparking.
- Uzglabāšana: Store the chop saw in a dry, secure location out of reach of children and unauthorized users.
Problēmu novēršana
Šajā sadaļā ir aplūkotas bieži sastopamas problēmas, ar kurām jūs varētu saskarties. Problēmu gadījumā, kas šeit nav uzskaitītas, sazinieties ar kvalificētu servisa tehniķi.
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| Zāģis neieslēdzas | No power supply; Faulty power cord/plug; Defective switch; Overload protection tripped. | Check power connection and outlet; Inspect power cord; Contact service for switch replacement; Reset circuit breaker. |
| Pārmērīga vibrācija vai troksnis | Loose blade; Damaged blade; Loose mounting bolts; Worn bearings. | Tighten blade nut; Replace damaged blade; Tighten mounting bolts; Contact service for bearing replacement. |
| Slikta griešanas veiktspēja | Dull or incorrect blade; Incorrect cutting technique; Workpiece not secured. | Replace with sharp, appropriate blade; Apply steady, even pressure; Secure workpiece firmly. |
| Motors pārkarst | Blocked ventilation slots; Overloading the motor; Continuous heavy use. | Clean ventilation slots; Reduce load; Allow motor to cool down. |
Tehniskās specifikācijas
| Funkcija | Specifikācija |
|---|---|
| Modelis | SMT 355 |
| Zīmols | AEG |
| Strāvas padeve | 2300 vati |
| Nav slodzes ātruma | 3800 XNUMX RPM |
| Wheel/Blade Diameter | 355 mm (14 collas) |
| Maks. Griešanas dziļums | 115 mm |
| Asmens materiāls | Ātrgaitas tērauds |
| Virsmas ieteikums | Metal, Stainless Steel, Wood |
| Barošanas avots | Elektrība ar vadu |
| Preces svars | 16.5 mārciņas (aptuveni 7.48 kg) |
| Roktura materiāls | Gumija |
| Iepakojuma izmēri | 57.8 x 42.6 x 35.8 cm |
Garantija un atbalsts
Specific warranty terms and conditions for the AEG SMT 355 Corded Electric Chop Saw are typically provided with the product at the time of purchase or can be found on the official AEG webjūsu reģionam atbilstošā vietne. Lūdzu, saglabājiet pirkuma apliecinājumu garantijas prasību iesniegšanai.
For technical support, service, or spare parts, please refer to the contact information provided by your retailer or visit the official AEG website for authorized service centers in your area. This manual does not contain specific contact details for support.
