1. Ievads
Šajā rokasgrāmatā ir sniegti detalizēti norādījumi par jūsu ierīces uzstādīšanu, darbību un apkopi. Webasto 1533 Digital Timer. This timer is designed to control Webasto Thermo Top C heaters, allowing for convenient pre-programming of heating cycles. Please read this manual thoroughly before using the device to ensure proper function and safety.
2. Drošības informācija
- Always ensure the vehicle's power supply is disconnected before attempting any installation or maintenance.
- Installation should ideally be performed by a qualified technician to prevent damage to the device or vehicle.
- Do not expose the timer to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Izmantojiet tikai oriģinālu WebAsto rezerves daļas un piederumi.
3. Produkts beidziesview
The Webasto 1533 Digital Timer is an oval-shaped control unit featuring an LCD display and intuitive buttons for setting time and programming heating functions. It allows users to schedule heater operation in advance.
3.1. attēls: Priekšpuse view no Webasto 1533 Digital Timer, showing the oval shape, LCD display with '7:30' and a flame icon, and control buttons (up, down, set, flame/heater icon, fan icon).
3.2. attēls: The Webasto 1533 Digital Timer displayed with its original packaging, a foam gasket, and a mounting screw. The packaging indicates multilingual labels for 'Digital timer 1533'.
4. Uzstādīšana un iestatīšana
The Webasto 1533 Digital Timer is designed for integration with your vehicle's Webasto Thermo Top C heating system. Proper installation is crucial for optimal performance.
4.1 Mounting the Timer
- Select a suitable location within the vehicle cabin that is easily accessible to the driver and away from direct heat or moisture.
- Ensure there is sufficient space behind the mounting surface for the electrical connector.
- Use the provided mounting screw to secure the timer in place.
4.2 Elektriskais savienojums
The timer connects to the heater control unit via a dedicated wiring harness (not included, may need to be purchased separately). Refer to your heater's installation manual for specific wiring diagrams.
4.1. attēls: Aizmugure view no Webasto 1533 Digital Timer, showing the product label with model number '1322580A' and the 4-pin electrical connector.
4.2. attēls: Close-up of the 4-pin electrical connector on the rear of the Webasto 1533 Digital Timer, highlighting the gold-plated pins for connection to the wiring harness.
- Connect the 4-pin connector from the wiring harness to the corresponding port on the back of the timer. Ensure a secure fit.
- Once connected, restore power to the vehicle. The timer display should illuminate.
4.3 Pulksteņa iestatīšana
- Nospiediet pogu IESTATĪT pogu. Stundu cipari mirgos.
- Izmantojiet < un > pogas, lai pielāgotu stundu.
- Nospiediet IESTATĪT vēlreiz. Mirgos minūšu cipari.
- Izmantojiet < un > pogas, lai pielāgotu minūtes.
- Nospiediet IESTATĪT a third time to confirm the time.
5. Lietošanas instrukcijas
5.1 Manual Heater Activation
To manually turn on the heater, press the flame/heater icon button. The heater will start and operate for a preset duration (typically 30 minutes, adjustable via heater settings).
5.2 Programming a Heating Time
The timer allows you to program up to three different start times for your heater.
- Nospiediet pogu IESTATĪT button repeatedly until 'P1' (Program 1) appears on the display.
- Nospiediet IESTATĪT again. The hour digits for P1 will flash.
- Izmantojiet < un > buttons to set the desired hour.
- Nospiediet IESTATĪT. The minute digits for P1 will flash.
- Izmantojiet < un > buttons to set the desired minutes.
- Nospiediet IESTATĪT to confirm P1.
- Repeat steps 1-6 for P2 and P3 if additional programs are desired.
- To activate a program, press the flame/heater icon button until the desired program (P1, P2, or P3) is displayed and the flame icon is solid. The heater will start at the programmed time.
5.3 Deactivating a Program
To deactivate an active program, press the flame/heater icon button until the flame icon disappears from the display.
6. Apkope
The Webasto 1533 Digital Timer requires minimal maintenance.
- Tīrīšana: Noslaukiet displeju un casing ar mīkstu, damp audums. Neizmantojiet abrazīvus tīrīšanas līdzekļus vai šķīdinātājus.
- Akumulators: The timer does not contain user-replaceable batteries for its primary function. Power is supplied by the vehicle's electrical system.
7. Traucējummeklēšana
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| Displejs ir tukšs | Nav barošanas avota; vaļīgs savienojums | Check vehicle's power supply and timer's electrical connection. |
| Heater does not start at programmed time | Program not activated; incorrect time setting; heater fault | Ensure program is active (flame icon solid). Verify current time and programmed time. Check heater for other faults. |
| Pogas nereaģē | Temporary software glitch; physical damage | Disconnect and reconnect power to reset. If problem persists, contact technical support. |
8. Specifikācijas
| Funkcija | Detaļas |
|---|---|
| Zīmols | Webēzelis |
| Modeļa numurs | 1322580A |
| Compatible Heaters | Webasto Thermo Top C (12V) |
| Izmēri (G x P x A) | 11.2 x 8.1 x 3.8 cm |
| Preces svars | 98 g |
| Barošanas avots | 12V (from vehicle) |
9. Garantija un atbalsts
Šis Webasto 1533 Digital Timer is a genuine Webasto part, ensuring quality and compatibility with your heating system. For warranty information, please refer to the documentation provided with your original heater or contact your Webasto izplatītājs.
Technical support is available for assistance with installation, operation, or troubleshooting. Please contact your authorized Webasto service partner or visit the official Webēzelis webvietne, lai iegūtu atbalsta kontaktinformāciju.
