DYNAUDIO Emit M10 Bookshelf Speaker Instruction Manual

Ievads

Thank you for choosing the DYNAUDIO Emit M10 Bookshelf Speakers. The M10 is the most compact model in the Emit range, designed to provide high-end audio performance. These speakers feature a 28 mm soft dome tweeter and a 14 cm MSP (Magnesium Silicate Polymer) mid/bass driver, coupled with a 1st order crossover. The Emit M10 is engineered for easy integration with various amplifiers, offering a 6 ohm impedance and an expertly tuned bass-reflex cabinet for impressive low-frequency response.

This manual provides essential information for the proper setup, operation, and maintenance of your new speakers to ensure optimal performance and longevity.

Svarīga drošības informācija

• Pirms produkta lietošanas rūpīgi izlasiet šos norādījumus.
• Saglabājiet šos norādījumus turpmākai uzziņai.
• Ievērojiet visus brīdinājumus uz izstrādājuma un lietošanas instrukcijā.
• Izpildiet visus norādījumus.
• Neizmantojiet šo ierīci ūdens tuvumā.
• Tīriet tikai ar sausu drānu.
• Neaizbloķējiet ventilācijas atveres. Uzstādiet saskaņā ar ražotāja norādījumiem.
• Neuzstādiet tuvu siltuma avotiem, piemēram, radiatoriem, siltuma reģistriem, krāsnīm vai citām ierīcēm (tostarp amppacēlāji), kas ražo siltumu.
• Izmantojiet tikai ražotāja norādītos piederumus/piederumus.
• Visus apkopes darbus nododiet kvalificētam apkopes personālam. Apkope ir nepieciešama, ja ierīce ir jebkādā veidā bojāta, piemēram, ir bojāts barošanas vads vai kontaktdakša, aparātā ir izlijis šķidrums vai iekrituši priekšmeti, ierīce ir bijusi pakļauta lietus vai mitruma iedarbībai, nedarbojas normāli. , vai ir nomests.

Iepakojuma saturs

Carefully unpack your DYNAUDIO Emit M10 speakers and verify that all items are present:

• DYNAUDIO Emit M10 Bookshelf Speakers (Pair)
• Grills (Pair)
• Lietošanas instrukcija (šis dokuments)

Ja kādas preces trūkst vai ir bojātas, lūdzu, nekavējoties sazinieties ar savu mazumtirgotāju.

Iestatīšana

Skaļruņu izvietojums

Proper speaker placement is crucial for optimal sound quality. Consider the following guidelines:

• Attālums no sienām: Bookshelf speakers generally benefit from being placed a short distance from the rear wall to allow the bass-reflex port to function correctly and prevent excessive bass. Experiment with distances from 6 inches to 2 feet (15-60 cm).
• Augstums: Position the speakers so that the tweeters are approximately at ear level when you are seated in your primary listening position. This often means placing them on dedicated speaker stands or sturdy shelves.
• Stereo trijstūris: For a stereo setup, place the speakers and your listening position to form an equilateral triangle. The distance between the speakers should be roughly equal to the distance from each speaker to your listening position.
• Iegūšana: Experiment with angling the speakers slightly inward towards your listening position (toe-in). This can improve imaging and soundstage focus.

Attēls: priekšpuse view of the white DYNAUDIO Emit M10 Bookshelf Speaker with the protective grill attached.

Attēls: priekšpuse view of the white DYNAUDIO Emit M10 Bookshelf Speaker, showing the tweeter and mid/bass driver without the grill.

Savienojuma izveide ar Ampdzīvāks

The DYNAUDIO Emit M10 speakers are passive speakers and require an external amplifier for operation. Follow these steps to connect your speakers:

1. Izslēgt: Nodrošiniet savu amplifier is turned off and unplugged from the power outlet before making any connections.
2. Skaļruņu kabeļi: Use high-quality speaker cables. Strip approximately 1/2 inch (1.25 cm) of insulation from the ends of the speaker wires. Twist the bare strands tightly.
3. Polaritāte: It is critical to connect the speakers with correct polarity. Connect the positive (+) terminal (red) on the speaker to the positive (+) terminal (red) on your amplifier. Similarly, connect the negative (-) terminal (black) on the speaker to the negative (-) terminal (black) on your amplifier. Incorrect polarity will result in poor sound quality, particularly in bass response.
4. Droši savienojumi: Unscrew the binding posts on the back of the speaker and amplifier, insert the bare wire or banana plug, and tighten securely. Ensure no stray wire strands are touching other terminals, which could cause a short circuit.

Attēls: Aizmugure view of the white DYNAUDIO Emit M10 Bookshelf Speaker, highlighting the bass-reflex port and the speaker wire binding posts.

Skaļruņu vadība

Once your speakers are properly connected to an amplifier, you can begin enjoying your audio system.

• Ieslēgšana: Pievienojiet un ieslēdziet savu ampdzīvāks.
• Skaļuma kontrole: Sāciet ar amplifier's volume control at its lowest setting and gradually increase it to a comfortable listening level.
• Ielaušanās periods: Like many high-fidelity audio components, your speakers may benefit from a "break-in" period. This typically involves 50-100 hours of normal use, during which the drivers will loosen up and the sound quality may improve further.
• Grili: The included grills protect the speaker drivers. You may choose to use them or remove them for a slightly different aesthetic and potentially a subtle change in sound, though the acoustic impact is generally minimal.

Apkope

To ensure the longevity and optimal performance of your DYNAUDIO Emit M10 speakers, follow these maintenance guidelines:

• Tīrīšana: Regulāri noslaukiet skaļruņu korpusus ar mīkstu, sausu, nepūkošu drānu. Lai noturīgus traipus viegli noslaukietampen the cloth with water, but avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish.
• Grili: The speaker grills can be gently cleaned with a soft brush or a vacuum cleaner with a brush attachment.
• Izvairieties no tiešiem saules stariem un karstuma: Do not expose the speakers to direct sunlight for extended periods or place them near heat sources, as this can cause discoloration or damage to the cabinet and drivers.
• Mitrums: Keep the speakers away from excessive moisture or humidity.
• Vadītāja aizsardzība: Izvairieties tieši pieskarties skaļruņu draiveriem (augstfrekvenču skaļrunim un zemfrekvenču skaļrunim), jo tas var tos sabojāt.

Problēmu novēršana

Ja rodas problēmas ar skaļruņiem, skatiet tālāk norādītās bieži sastopamās problēmas un risinājumus.

• Nav skaņas:
  • Nodrošiniet amplifier is powered on and connected correctly.
  • Pārbaudiet visus skaļruņu kabeļu savienojumus abos amplifier and the speakers for secure contact and correct polarity.
  • Verify the correct input source is selected on your ampdzīvāks.
  • Confirm the volume is turned up on the ampdzīvāks.
• Izkropļota skaņa:
  • Samaziniet skaļuma līmeni savā amplifier. Overdriving the speakers can cause distortion.
  • Check speaker cable connections for any loose strands or short circuits.
  • Nodrošiniet amplifier's power output is suitable for the speakers (refer to specifications).
  • Pārbaudiet audio avotu, vai nav kropļojumu.
• Vāja basa frekvences:
  • Verify correct speaker polarity (+ to + and - to -) for both speakers. Incorrect polarity will cause bass cancellation.
  • Experiment with speaker placement, moving them closer to a wall can sometimes increase bass response.
• Nevienmērīgas skaņastage / Imaging Issues:
  • Ensure speakers are placed symmetrically and at equal distances from the listening position.
  • Adjust speaker toe-in.

If the problem persists, consult your retailer or qualified service personnel.

Specifikācijas

Image: Diagram illustrating the dimensions of the black DYNAUDIO Emit M10 Bookshelf Speaker.

Garantija un atbalsts

Garantijas informācija

Your DYNAUDIO Emit M10 Bookshelf Speakers are covered by a FIVE YEAR MANUFACTURER DEFECT WARRANTYŠī garantija attiecas uz materiālu un izgatavošanas defektiem normālas lietošanas apstākļos. Lūdzu, saglabājiet pirkuma apliecinājumu garantijas prasību iesniegšanai.

For specific terms and conditions of the warranty, please refer to the documentation provided with your purchase or visit the official DYNAUDIO webvietne.

Klientu atbalsts

If you require technical assistance, have questions about your product, or need to initiate a warranty claim, please contact your authorized DYNAUDIO retailer or visit the official DYNAUDIO support webvietne, lai saņemtu papildu palīdzību.

Please have your product model number (EMIT 10) and proof of purchase ready when contacting support.