1. Ievads
This user manual provides comprehensive instructions for the safe and efficient operation of the Showtec Compact Par 7 Q4 7 x 3W RGBW LED Floor PAR Spot. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper use and to prevent damage to the unit or injury to personnel.
The Showtec Compact Par 7 Q4 is a compact RGBW PAR can designed for various lighting applications, offering versatile color mixing and robust performance.
2. Drošības instrukcijas
Lai samazinātu elektriskās strāvas trieciena, ugunsgrēka vai traumu risku, vienmēr ievērojiet šādus drošības pasākumus:
- Nodrošiniet strāvas padeves apjomutage atbilst sējtage norādīts uz ierīces.
- Vienmēr pievienojiet ierīci iezemētai strāvas kontaktligzdai.
- Nedarbiniet ierīci, ja strāvas vads ir bojāts.
- Disconnect from mains power before cleaning or servicing.
- Nepakļaujiet ierīci lietus vai mitruma iedarbībai.
- Maintain adequate ventilation around the unit to prevent overheating.
- Izvairieties no tiešas acu iedarbības uz gaismas avotu.
- Šī iekārta ir paredzēta lietošanai tikai iekštelpās.
3. Produkts beidziesview
The Showtec Compact Par 7 Q4 features seven 3W RGBW LEDs, providing a wide spectrum of colors. Its compact design makes it suitable for floor standing or truss mounting.
3.1. attēls. Priekšpuse view of the Showtec Compact Par 7 Q4 with red light output, showcasing its seven powerful RGBW LEDs.
Figure 3.2: The PAR spot emitting a bright white light, demonstrating its full spectrum capabilities.
Figure 3.3: The PAR spot displaying a vibrant blue light, highlighting its color mixing versatility.
3.4. attēls: Tuvplāns view of the LED array when the unit is off, showing the individual lenses.
3.5. attēls. Aizmugure view of the unit, showing the power input and DMX connections (XLR 3-pin).
3.6. attēls: Leņķis view of the PAR spot, demonstrating the adjustable mounting bracket for floor or truss applications.
4. Iestatīšana
4.1 Izpakošana
Carefully unpack the unit and check for any damage during transit. Retain the packaging material for future transport or storage.
4.2 Montāža
The Compact Par 7 Q4 can be used as a floor spot or mounted to a truss using the integrated bracket. Ensure the mounting surface or truss can support the weight of the fixture. Use appropriate clamps and safety cables when mounting overhead.
4.3 Strāvas pieslēgums
Connect the power cable to the unit's power input and then to a grounded electrical outlet. Verify that the local voltage atbilst ierīces prasībām (240 volti).
4.4 DMX savienojums (pēc izvēles)
For DMX control, connect a DMX cable from your DMX controller to the DMX IN port of the fixture. If connecting multiple units, daisy-chain them by connecting the DMX OUT of the first unit to the DMX IN of the next.
5. Darbība
5.1 Vadības panelis
The unit features a digital display and control buttons (Menu, Up, Down, Enter) on the rear for setting modes and DMX addresses.
5.2. Darbības režīmi
The Showtec Compact Par 7 Q4 typically offers several operating modes:
- DMX režīms: Allows control via an external DMX controller. Set the DMX address using the control panel.
- Automātiskais režīms: Pre-programmed light shows that run automatically.
- Skaņas aktīvais režīms: The light reacts to sound via a built-in microphone.
- Galvenā/pakalpojuma režīms: Link multiple units where one acts as the master and others as slaves, synchronizing their operation.
- Statiskais krāsu režīms: Select and display a single static color.
5.3 DMX kanālu diagramma
Refer to the specific DMX channel chart in the full product manual for detailed information on controlling each function via DMX. Common channels include Dimmer, Red, Green, Blue, White, Strobe, and Program selection.
6. Apkope
6.1. Tīrīšana
Regular cleaning of the lenses and housing is recommended to maintain optimal light output and extend the unit's lifespan. Use a soft, lint-free cloth and a mild glass cleaner. Do not use abrasive materials.
6.2 Drošinātāja nomaiņa
If the unit does not power on, check the fuse located near the power input. Replace it with a fuse of the same type and rating only.
6.3. Uzglabāšana
When not in use, store the unit in its original packaging or a suitable flight case in a dry, dust-free environment.
7. Traucējummeklēšana
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| Ierīce neieslēdzas | No power supply; Blown fuse; Damaged power cable | Check power connection; Replace fuse; Replace cable |
| Nav DMX vadības | Incorrect DMX address; Faulty DMX cable; DMX controller issue | Verify DMX address; Check/replace DMX cable; Test controller |
| Gaismas mirgo vai darbojas nevienmērīgi | Poor DMX signal; Overheating; Internal fault | Check DMX connections; Ensure proper ventilation; Contact support |
| Krāsas ir nepareizas | Incorrect DMX channel values; Internal calibration issue | Adjust DMX values; Perform factory reset if available; Contact support |
8. Specifikācijas
| Funkcija | Detaļas |
|---|---|
| Zīmols | Showtec |
| Modelis | Q4 |
| Atsauces numurs | LIG0013729-000 |
| Gaismas avots | 7x3W RGBW gaismas diodes |
| Jauda | 3 Watts (per LED) |
| Voltage | 240 volts |
| Barošanas avots | Elektrības kabelis |
| Izmēri (G x P x A) | 31.5 x 31 x 15.5 cm |
| Svars | 2.73 kilogrami |
| ASIN | B01F04U758 |
9. Garantija un atbalsts
Information regarding specific warranty terms and conditions for the Showtec Compact Par 7 Q4 is not available in the provided product details. Please refer to the retailer or manufacturer's official webvietne jaunākajai garantijas informācijai.
For technical support, service, or spare parts inquiries, please contact your authorized Showtec dealer or the manufacturer directly. Always provide the model number (Q4) and reference number (LIG0013729-000) when seeking support.
