1. Ievads
The ecobee Switch+ is a smart light switch designed to integrate seamlessly into your smart home ecosystem, offering advanced lighting control and built-in Amazon Alexa functionality. This manual provides detailed instructions for installation, operation, and troubleshooting to ensure optimal performance of your device.
Attēls: priekšpuse view of the ecobee Switch+ Smart Light Switch.
The ecobee Switch+ combines smart lighting features with the convenience of Amazon Alexa, allowing you to control your lights with voice commands, motion detection, ambient light sensors, and through the ecobee mobile app. It also supports Apple HomeKit and Google Assistant for broader smart home integration.
Produkts beidziesview Video
Video: Oficiāls paziņojumsview of the ecobee Switch+ Smart Light Switch, highlighting its key features and benefits.
2. Drošības informācija
WARNING: Installation involves handling high voltage wiring. If you are uncomfortable or unfamiliar with electrical work, consult a qualified electrician. Always turn off power at the circuit breaker before beginning installation.
The ecobee Switch+ requires a neutral wire and a ground wire for proper operation. It is compatible with single-pole switches only and is not designed for use with 3-way or 4-way switches. Ensure your electrical setup meets these requirements before proceeding.
3. Kas ir kastē
- ecobee Switch+ Smart Light Switch
- Dekoratīvā apdares plāksne
- Uzstādīšanas instrukcijas
- Stiepļu uzgriežņi
Image: The ecobee Switch+ box contents, showing the switch, wall plate, wire nuts, and setup instructions on a smartphone screen.
4. Iestatīšana un instalēšana
Installation of the ecobee Switch+ typically takes about 45 minutes and can be completed by following the step-by-step instructions provided in the ecobee mobile app. Ensure you have the necessary tools: a Philips head screwdriver, a flathead screwdriver, and pliers (optional).
Uzstādīšanas soļi:
- Izslēdziet barošanu: Locate your circuit breaker and turn off the power to the switch you are replacing. Confirm power is off by flipping the switch a few times.
- Noņemiet veco slēdzi: Carefully remove the existing wall plate and unscrew the old light switch from the wall box.
- Identificējiet vadus: Identify the line, load, neutral, and ground wires. The ecobee Switch+ requires a neutral wire (typically white) and a ground wire (typically copper or green).
- Connect ecobee Switch+: Use the provided wire nuts to connect the ecobee Switch+ wires to your home's wiring according to the in-app instructions.
- Montāžas slēdzis: Secure the ecobee Switch+ into the wall box using the mounting screws.
- Uzstādiet sienas plāksni: Attach the decorative trim plate.
- Atjaunot jaudu: Atkal ieslēdziet strāvu pie ķēdes pārtraucēja.
- Lietotnes iestatīšana: Download the ecobee app from the App Store or Google Play. Follow the in-app prompts to connect your Switch+ to your Wi-Fi network and complete the setup, including linking with Amazon Alexa, Apple HomeKit, or Google Home.
Detailed Installation and Setup Video
Video: A comprehensive guide demonstrating the unboxing, installation process, and initial setup of the ecobee Switch+ using the mobile app.
5. Lietošanas instrukcijas
Physical Control:
The ecobee Switch+ features a rocker-style switch. Press the bottom portion to toggle the connected lights on or off.
Balss vadība ar Amazon Alexa:
With built-in Amazon Alexa, you can control your lights and access Alexa's features directly from the switch. Simply say "Alexa" followed by your command.
- "Alexa, turn on the lights."
- "Alexa, turn off the lights."
- "Alexa, iestati taimeri uz 5 minūtēm."
- "Aleksa, kādi ir laikapstākļi?"
- To mute Alexa, press the top portion of the switch until the light ring turns red. Press again to unmute.
Image: A family using voice commands to interact with the ecobee Switch+ in a living room setting.
Mobilo lietotņu vadība:
Use the ecobee mobile app (available on Android and iOS) to control your lights remotely, adjust settings, and manage smart features.
- Toggle lights on/off.
- Configure Smart On/Off settings.
- Set Night Light preferences.
- Integrate with Apple HomeKit and Google Home for centralized control.
Image: The ecobee Switch+ on a wall, with a smartphone showing the ecobee app interface for remote light control.
6. Viedās funkcijas
The ecobee Switch+ offers several intelligent features to automate your lighting:
- Smart On: Automatically turns on lights when motion is detected in the room. You can configure daylight detection and 'Do Not Disturb' times to prevent activation during specific periods.
- Viedā izslēgšana: Automatically turns off lights when no one is detected in the room after a set period (e.g., 1 minute). This helps conserve energy.
- Nakts gaisma: Provides a subtle glow in the dark, useful for hallways or children's rooms. This feature can be enabled or disabled via the app.
- Apkārtējās gaismas sensors: Detects the amount of natural light in a room to optimize lighting behavior.
- Kustības sensors: Detects occupancy to trigger Smart On/Off features.
Image: Demonstrates motion-activated lighting and voice control for setting timers.
7. Apkope
- Tīrīšana: Gently wipe the surface of the switch and wall plate with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Programmatūras atjauninājumi: Ensure your ecobee Switch+ firmware is up to date through the ecobee mobile app to access the latest features and improvements.
8. Traucējummeklēšana
- Gaismas nereaģē: Check if the circuit breaker is on. Ensure the switch is properly installed and wired. Verify Wi-Fi connectivity.
- Alexa neatbild: Ensure Alexa is not muted (red light ring). Check Wi-Fi connection. Re-link your Amazon account in the ecobee app if necessary.
- Wi-Fi savienojamības problēmas: Ensure your Wi-Fi network is 2.4 GHz. If using a mesh Wi-Fi system, ensure the switch is connecting to a stable signal. Try restarting your router.
- Smart features not working: Verify settings in the ecobee app for Smart On, Smart Off, and Night Light. Check for any 'Do Not Disturb' schedules that might be interfering.
9. Specifikācijas
| Specifikācija | Vērtība |
|---|---|
| Modeļa numurs | EB-SMSWV-02 |
| Dimensions (Switch+) | Height: 106 mm (4.17 inch), Width: 45 mm (1.8 inch), Depth: 50 mm (2 inch) |
| Dimensions (Wall Plate) | Height: 119 mm (4.7 inch), Width: 45 mm (2.95 inch), Depth: 7 mm (0.3 inch) |
| Elektriskās prasības | 120V AC 60Hz, 600W incandescent, 150W LED and CFL |
| Elektroinstalācija | Neutral and ground wire required, Automatic line and load wire switching |
| Saderība | Single/double/multi-switch (not 3-way compatible), Rocker style plates |
| Savienojamība | Wi-Fi, IEEE 802.11 b/g/n 2.4 GHz, WPA/WPA2, WEP, DHCP, TLS, 915 MHz |
| Kontroles metode | Voice (Amazon Alexa), Mobile App (Android, iOS), HomeKit, Google Assistant |
| Darbības režīms | Automātiski, Izslēgts, Smart Off |
| Materiāls | Copper (contact material) |
| Sertifikāti | RoHS compliant, UL Listed |
10. Garantija un atbalsts
Garantija:
The ecobee Switch+ comes with a 1-Year Limited Warranty. Please refer to the warranty documentation included with your product for full details and terms.
Klientu atbalsts:
For further assistance, technical support, or warranty claims, please contact ecobee customer support through their official website or the ecobee mobile app.
