Ievads
This manual provides essential information for the safe and proper assembly, use, and maintenance of your Graco Benton 4-in-1 Convertible Crib and Changer. Please read all instructions carefully before assembly and retain this manual for future reference. This product is designed to adapt to your child's growth, converting from a crib to a toddler bed, daybed, and full-size bed with headboard.
Image: The Graco Benton 4-in-1 Convertible Crib and Changer in black, showcasing its crib and attached changing table configuration.
Drošības informācija
Jūsu bērna drošība ir vissvarīgākā. Vienmēr ievērojiet šīs vadlīnijas:
- Izlasiet visus norādījumus: Ensure you understand all assembly and usage instructions before using the product.
- Regulāra pārbaude: Periodiski pārbaudiet visas skrūves, bultskrūves un stiprinājumus, lai pārliecinātos, ka tie ir cieši pievilkti. Nelietojiet bērnu gultiņu, ja kādas detaļas trūkst, ir bojātas vai salauztas.
- Mattress Safety: Use only a mattress that is at least 27 1/4 inches (69 cm) by 51 5/8 inches (131 cm) with a thickness not exceeding 6 inches (15 cm). The mattress must fit snugly without gaps.
- Child Height Limit: Discontinue use of the crib when your child begins to climb out or reaches 35 inches (89 cm) in height.
- Changing Table Safety: Always use the safety strap provided with the changing pad. Never leave a child unattended on the changing table.
- Aizrīšanās risks: Keep small parts, plastic bags, and packaging materials away from children.
- Sertifikāti: This product is GREENGUARD Gold Certified, screened for over 10,000 chemicals and VOCs, and JPMA Certified, meeting or exceeding all applicable safety standards.
Image: The Graco Benton Crib and Changer with a GREENGUARD Gold Certified badge, indicating low chemical emissions.
Komponentu saraksts
Before assembly, ensure all components are present. Refer to the detailed parts list in your product packaging for specific hardware. Key components include:
- Crib side rails (front, back, left, right)
- Crib mattress support base
- Changing table frame
- Changing pad with safety strap
- Drawer components (3 drawers)
- Shelf components (2 open shelves)
- Hardware pack (screws, bolts, barrel nuts, Allen wrench)
Image: A diagram illustrating the key features of the crib and changer, including the adjustable mattress support, attached changing table, drawers, and shelves.
Iestatīšana
Assembly is required. Follow the step-by-step instructions provided in the separate assembly guide included with your product. A general overview of the setup process is as follows:
- Izpakojiet sastāvdaļas: Uzmanīgi izņemiet visas detaļas no iepakojuma un pārbaudiet tās atbilstoši sastāvdaļu sarakstam.
- Assemble Crib Frame: Piestipriniet sānu sliedes pie galvgaļa un kājgaļa, izmantojot komplektā iekļautos stiprinājumus.
- Matrača atbalsta uzstādīšana: Secure the mattress support base at the desired height. There are three adjustable height options.
- Salieciet pārtinamo galdu: Construct the changing table frame, including the drawers and open shelves.
- Attach Changing Table: Securely attach the assembled changing table to the crib frame.
- Install Changing Pad: Place the water-resistant changing pad on the changing table and secure it with the safety strap.
For detailed visual instructions, please refer to the assembly diagrams in your product's dedicated assembly manual.
Lietošanas instrukcijas
Crib Use
Place your child in the crib on their back. Ensure the mattress is firm and fits snugly. Adjust the mattress support base to the appropriate height for your child's developmental stage. The highest position is for infants, and lower positions are for older babies who can sit or stand.
Changing Table Use
Always use the changing pad with the safety strap. Place your child on the changing pad and secure the safety strap around them. Keep all necessary changing supplies within reach but away from the child. Never leave your child unattended on the changing table.
Image: A close-up of the attached changing table, showing the water-resistant changing pad and the integrated safety strap.
Reklāmguvumi
The Graco Benton 4-in-1 Crib and Changer converts to a toddler bed, daybed, and full-size bed. Conversion kits and mattresses are sold separately.
- Mazuļu gulta: Remove the front crib rail and install the Graco Toddler Guardrail (sold separately).
- Dienas gulta: Remove the front crib rail. No guardrail is used for the daybed configuration.
- Pilna izmēra gulta: Remove all crib rails and the changing table. Attach the headboard to a Graco Full-Size Conversion Kit (sold separately) and a standard full-size mattress.
Attēls: Četru konversiju vizuāls attēlojumstages: crib, toddler bed, daybed, and full-size bed with headboard.
Apkope
To maintain the quality and safety of your Graco Benton Crib and Changer:
- Tīrīšana: Noslaukiet virsmas ar reklāmuamp cloth. Avoid abrasive cleaners or strong chemicals that could damage the finish or materials.
- Uzglabāšana: If storing the product, do so in a dry, temperature-controlled environment to prevent warping or damage.
- Aparatūra: Periodically check all hardware for tightness. Loose hardware can lead to instability and safety hazards.
Problēmu novēršana
If you encounter issues with your Graco Benton Crib and Changer, consider the following:
- Svārstīga struktūra: Pārliecinieties, vai visas skrūves un bultskrūves ir pilnībā pievilktas. Vēlreiz pārbaudiet montāžas soļus, lai pārliecinātos par pareizu detaļu novietojumu.
- Atvilktnes neslīd vienmērīgi: Verify that the Euro drawer glides are correctly installed and free from obstructions. Ensure drawers are not overloaded.
- Difficulty with Conversions: Refer to the specific conversion instructions provided with the optional conversion kits. Ensure all necessary parts are acquired.
- Trūkstošās daļas: If any parts are missing upon unboxing, contact customer support immediately. Do not attempt to substitute parts.
Specifikācijas
| Funkcija | Detaļas |
|---|---|
| Modeļa numurs | 04586-64B |
| Krāsa | Melns |
| Produkta izmēri (G x P x A) | 73.2 cm x 29.8 cm x 41.7 cm |
| Preces svars | 98 mārciņas |
| Materiāls | Pine wood, engineered wood, and wood composites |
| Maximum Child Height (Crib Stage) | 35 collas (89 cm) |
| Maximum Weight (Toddler/Daybed) | 50 mārciņas |
| Sertifikāti | GREENGUARD zelta sertifikāts, JPMA sertifikāts |
| UPC | 081877503177 |
Image: A diagram illustrating the overall dimensions of the Graco Benton Crib and Changer.
Oficiālais produkta video
Video: An official video from Storkcraft, the manufacturer of Graco products, highlighting the brand's commitment to supporting parents and providing safe, reliable baby products. This video showcases various Graco products and the design philosophy behind them.
Garantija un atbalsts
The Graco Benton 4-in-1 Convertible Crib and Changer is backed by a 1 gads ierobežota garantija pret ražošanas defektiem. Lūdzu, saglabājiet pirkuma apliecinājumu garantijas prasību iesniegšanai.
For customer support, missing parts, or further assistance, please contact Storkcraft Customer Service:
- Webvietne: Apmeklējiet Storkcraft Brand Store lai iegūtu kontaktinformāciju un bieži uzdotos jautājumus.
- Tālrunis: Refer to the contact details provided in your product packaging or on the official Storkcraft webvietne.
When contacting support, please have your model number (04586-64B) and date of purchase readily available.
