Teknetics Tek-Point Pulse Induction Pinpointer User Manual

1. Ievads

Thank you for choosing the Teknetics Tek-Point Pulse Induction Pinpointer. This device is designed to accurately locate metal objects in various environments, including soil, sand, and underwater. Its pulse induction technology provides enhanced sensitivity, especially in mineralized ground. Please read this manual thoroughly before operating your pinpointer to ensure proper use and to maximize its performance and longevity.

The Tek-Point is a fully waterproof pinpointer, submersible to 6 feet, making it suitable for both fresh and saltwater use. It features an LED light for low-light conditions and comes with a belt holster for convenient carrying.

2. Produkts beidziesview

The Tek-Point pinpointer is engineered for precision and durability. Familiarize yourself with its main components and features.

1. attēls: Teknetics Tek-Point Pulse Induction Pinpointer. This image displays the green-colored pinpointer, highlighting its compact design, the tip for detection, and the control button. A belt holster is also visible, indicating its portability.

Galvenās funkcijas:

• Pulse Induction Technology: Provides superior depth and sensitivity, especially in challenging ground conditions.
• Ūdensnecaurlaidīgs dizains: Fully submersible up to 6 feet (1.8 meters) for use in wet environments.
• Atklāšanas režīmi: Offers audible beep, vibration, or a combination of both for target indication.
• LED gaisma: Integrated LED for illuminating the target area in low-light conditions.
• Darbība ar vienu pogu: Simple and intuitive control for all functions.
• 3 jutības līmeņi: Adjustable sensitivity to fine-tune detection for various target sizes and conditions.
• Lost Mode Alarm: An alarm feature to help locate the pinpointer if misplaced.
• Belt Holster: Included for convenient and secure carrying.

3. Iestatīšana

3.1 Akumulatora uzstādīšana

The Tek-Point pinpointer requires one 9V battery (not included) for operation. Ensure the battery is fresh and correctly installed for optimal performance.

1. Locate the battery cap at the rear end of the pinpointer.
2. Unscrew the battery cap by turning it counter-clockwise.
3. Insert a fresh 9V battery, ensuring the positive (+) and negative (-) terminals align correctly with the pinpointer's contacts.
4. Carefully screw the battery cap back on clockwise until it is securely tightened. Ensure the O-ring seal is properly seated to maintain the waterproof integrity of the device.

Svarīgi: Always ensure the battery cap is fully tightened before submerging the pinpointer in water to prevent water ingress and damage.

4. Lietošanas instrukcijas

4.1 Ieslēgšana/izslēgšana

• To turn on the pinpointer, press and hold the power button for approximately 1 second until you hear a short beep and/or feel a vibration. The LED light will also illuminate briefly.
• To turn off the pinpointer, press and hold the power button for approximately 2 seconds until you hear a longer beep and/or feel a longer vibration. The LED light will turn off.

4.2. Jutības regulēšana

The Tek-Point has 3 sensitivity levels. Adjusting the sensitivity allows you to optimize detection for different target sizes and ground conditions.

1. With the pinpointer powered on, quickly press the power button repeatedly to cycle through the sensitivity levels.
2. Each press will advance to the next sensitivity level, indicated by a series of short beeps/vibrations (e.g., one beep for Level 1, two for Level 2, three for Level 3).
3. Level 1 is the lowest sensitivity, suitable for large targets or highly mineralized ground. Level 3 is the highest sensitivity, ideal for small targets or less mineralized ground.

4.3 Detection Modes (Beep, Vibrate, Both)

The pinpointer can be set to beep, vibrate, or both when a target is detected.

• To change the detection mode, press and hold the power button for approximately 3 seconds (after powering on, but before powering off). The pinpointer will cycle through the modes: Beep Only, Vibrate Only, Beep + Vibrate.
• Release the button when you reach your desired mode.

4.4 Lost Mode Alarm

If the pinpointer is left on and inactive for a period (typically 5 minutes), it will emit an audible alarm to help you locate it. This feature helps prevent accidental loss in the field.

4.5 LED gaismas izmantošana

The integrated LED light automatically activates when the pinpointer is turned on, providing illumination for the target area. It will turn off when the pinpointer is powered off.

5. Apkope

5.1. Tīrīšana

• After each use, especially in wet or sandy conditions, rinse the pinpointer with fresh water.
• Noslaukiet ierīci ar mīkstu, damp audums. Neizmantojiet abrazīvus tīrīšanas līdzekļus vai šķīdinātājus.
• Ensure the battery cap area and O-ring are free of dirt and debris.
• Allow the pinpointer to air dry completely before storage.

5.2 Akumulatora kopšana

• Remove the battery if the pinpointer will not be used for an extended period to prevent leakage and damage.
• Atbrīvojieties no izlietotajām baterijām atbildīgi saskaņā ar vietējiem noteikumiem.

5.3. Uzglabāšana

Store the pinpointer in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided belt holster for protection during transport and storage.

6. Traucējummeklēšana

7. Specifikācijas

• Modelis: TEK-POINT
• Atklāšanas tehnoloģija: Pulsa indukcija
• Ūdens izturība: Fully submersible to 6 feet (1.8 meters)
• Jutības līmeņi: 3 (regulējams)
• Atklāšanas režīmi: Audio Beep, Vibration, Audio + Vibration
• Barošanas avots: 1x 9V Battery (not included)
• Integrētās funkcijas: LED Light, Lost Mode Alarm
• Materiāls: Izturīga plastmasa
• Izmēri: Aptuveni 10.3 x 3.3 x 2 collas (26.2 x 8.4 x 5.1 cm)
• Svars: Approximately 9.6 ounces (272 grams) without battery
• Iekļautie aksesuāri: Jostas maciņš

8. Garantija un atbalsts

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Teknetics webSaglabājiet pirkuma čeku kā pirkuma apliecinājumu garantijas prasību gadījumā.

Ražotājs: Teknetics

For further assistance, you may contact Teknetics customer service through their official channels. Details are typically available on the manufacturer's webvietā vai produkta iepakojumā.