Behringer NX1000 īpaši viegla 1000 W D klases jaudas pastiprinātāja Amppacēlāja lietošanas instrukcija

1. Ievads

This manual provides essential information for the safe and efficient operation of your Behringer NX1000 Ultra-Lightweight 1000W Class-D Power Amplifier. Please read this manual thoroughly before using the product to ensure proper setup, usage, and maintenance.

Priekšpuse view of the Behringer NX1000 ampdzīvnieks, šovsasing tā kompakto dizainu un priekšējā paneļa vadības elementus.

2. Kas ir kastē

Izpakojot, pārliecinieties, vai ir visas sastāvdaļas:

• Behringer NX1000 Ultra-Lightweight 1000-Watt Class-D Power Ampdzīvāks
• Strāvas kabelis
• Lietošanas instrukcija (šis dokuments)

3. Galvenās iezīmes

• Delivers 2 x 500 watts into 2 ohms; 2 x 300 watts into 4 ohms; 1000 watts into 4 ohms (Bridge mode) and weighs less than 7.3 lbs/ 3.3 kg.
• Ultimate reliability through revolutionary cool-running high-density Class-D technology with "near-zero" Thermal buildup.
• Īpaši efektīvs pārslēgšanas režīma barošanas avots trokšņu nesaturošai skaņai, izcilai pārejas reakcijai un zemam enerģijas patēriņam.
• Built-in stereo crossover with low-cut, high-cut and full range Mode.
• SmartSense loudspeaker Impedance compensation features fully Linear frequency response at any speaker load Impedance.

An efficiency graph illustrating the superior performance of Class-D technology compared to Class-AB, showing higher efficiency across various output power levels.

A frequency response graph demonstrating the linear output achieved by SmartSense loudspeaker impedance compensation, ensuring consistent sound quality regardless of speaker load.

4. Iestatīšana

Proper setup is crucial for optimal performance and safety. Follow these guidelines for connecting your ampdzīvotspējīgāks:

4.1. Plauktu montāža

The NX1000 is designed for standard 19-inch rack mounting. Secure the amplifier using appropriate rack screws through the rack ears on both sides of the unit.

Sānu profile of the Behringer NX1000 amplifier, highlighting its rack-mountable chassis.

4.2. Audio savienojumi

Pievienojiet audio avotu (mikseri, priekšskaņošanas ierīci)ampglābējs utt.) uz amplifier's input jacks. The NX1000 supports both XLR and 1/4-inch TRS connectors for balanced input signals.

Connect your passive loudspeakers to the amplifier's output terminals. The NX1000 provides both speakON and binding post outputs for flexible speaker connectivity.

Detalizēti view of the rear panel, showing input and output connectors for audio signals and speakers.

4.3. Strāvas pieslēgums

Connect the supplied power cable to the AC inlet on the rear panel of the amplādētāju un pēc tam pie piemērotas strāvas kontaktligzdas.

4.4. Iestatīšanas video pamācība

5. Darbināšana Ampdzīvāks

5.1. Ieslēgšana/izslēgšana

Nospiediet pogu SPĒKS switch on the front panel to turn the amplifier on or off. The SPĒKS LED will illuminate when the unit is active.

Close-up of the power button, indicating its location on the front panel.

5.2. Skaļuma regulēšana

Pielāgojiet KANĀLS A un KANĀLS B gain knobs on the front panel to set the desired output volume for each channel. The LCD display will show the decibel levels for precise adjustment.

5.3. Režīmu izvēle

On the rear panel, use the REŽĪMS switch to select between STEREO, TILTOTĀS, vai PARALĒLI operation, depending on your speaker configuration requirements.

• STEREO: Each channel operates independently, providing separate left and right audio signals.
• BRIDGED: Combines the power of both channels into a single, high-power output, ideal for driving a single subwoofer.
• PARALĒLE: Sends the same mono signal to both channels, useful for driving multiple speakers with identical audio.

5.4. Krosovera iestatījumi

Utilize the built-in stereo crossover with low-cut, high-cut, and full-range modes to optimize the frequency response for your specific speakers or subwoofers.

5.5. LED indikatori

Priekšējā panelī ir vairāki LED indikatori:

• PRO (Protect): Iedegas, ja amplifier enters protection mode due to overload, overheating, or short-circuit.
• LIMIT: Indicates that the output signal is approaching clipping. Reduce the input level to prevent distortion.
• SIGNĀLS: Lights up when an audio signal is present on the respective channel.
• JAUDA: Norāda, ka amppacēlājs ir ieslēgts.

5.6. Produkts beidziesview Video

6. Apkope

Lai nodrošinātu jūsu ilgmūžību un optimālu veiktspēju amplifier, follow these maintenance tips:

• Uzturiet ierīci tīru, noslaukot to ar mīkstu, sausu drānu. Izvairieties no abrazīvu tīrīšanas līdzekļu vai šķīdinātāju lietošanas.
• Nodrošiniet ap to atbilstošu ventilāciju amplifier to prevent overheating. Do not block the ventilation grilles.
• Regulāri pārbaudiet visus kabeļu savienojumus, vai tie ir droši nostiprināti un nav nodiluma pazīmju.

7. Traucējummeklēšana

If you encounter issues with your Behringer NX1000 amplifier, skatiet tālāk norādītās bieži sastopamās problēmas un risinājumus:

• Nav skaņas izvades:
  • Check all audio input and output connections.
  • Nodrošiniet amplifier is powered on and the POWER LED is illuminated.
  • Verify that input sources are active and sending a signal.
  • Adjust channel gain knobs and master volume on your mixer/preamp.
• Izkropļota skaņa:
  • Check if the LIMIT LED is illuminated; reduce input level if it is.
  • Pārliecinieties, vai skaļruņa pretestība atbilst amppacēlāja iespējas.
  • Inspect speaker cables for damage or incorrect wiring.
• Amplifier Enters Protect Mode (PRO LED illuminated):
  • Izslēdziet ampatvienojiet visus skaļruņus.
  • Check for short circuits in speaker cables or faulty speakers.
  • Ensure proper ventilation to prevent overheating. Allow the unit to cool down.
  • Verify that the speaker load impedance is within the amplifier's specified range (e.g., not below 2 ohms per channel).
• Pārmērīgs ventilatora troksnis:
  • Nodrošiniet amplifier has sufficient airflow and is not in an enclosed space.
  • Clean any dust buildup from the fan and ventilation grilles.

8. Specifikācijas

9. Garantija un atbalsts

The Behringer NX1000 amppacēlājs nāk ar a Ierobežota garantija. For detailed warranty information, product support, or service inquiries, please visit the official Behringer webvietnē vai sazinieties tieši ar viņu klientu atbalsta dienestu.

Lai iegūtu precīzāko un jaunāko informāciju par savu produktu, vienmēr skatiet ražotāja oficiālos resursus.