Fire-Lite ES-50X adresējamā trauksmes vadības paneļa lietotāja rokasgrāmata

1. Ievads

The Fire-Lite ES-50X is an advanced 50-point addressable fire alarm control panel designed for small to medium-sized applications. It features a built-in communicator, supports up to 50 addressable devices, and includes a real-time clock/calendar with four programmable function keys. This manual provides essential information for the proper installation, operation, and maintenance of the ES-50X panel to ensure reliable fire detection and notification.

1. attēls: Priekšpuse view of the Fire-Lite ES-50X Addressable Alarm Control Panel. The panel is housed in a red enclosure with a central control interface featuring an LCD display, keypad, and function buttons. A key lock is visible on the right side of the enclosure.

2. Drošības informācija

Svarīgi: Read all instructions carefully before installation and operation. Failure to follow these instructions may result in property damage, serious injury, or death. This device must be installed by qualified personnel in accordance with all local and national electrical codes and standards, including NFPA 72.

• Elektrības apdraudējums: Disconnect all power sources before servicing or installing the panel.
• Akumulatora drošība: Use only recommended battery types. Dispose of batteries according to local regulations.
• Zemējums: Ensure proper grounding of the panel and all connected devices.
• Vides apstākļi: Install the panel in a dry, clean environment within specified temperature and humidity ranges.
• Sistēmas pārbaude: The fire alarm system must be tested regularly as per NFPA 72 and local authority having jurisdiction (AHJ) requirements.

3. Uzstādīšana un instalēšana

3.1. Iepakojuma saturs

Pirms instalēšanas sākšanas pārliecinieties, vai ir visas sastāvdaļas:

• Fire-Lite ES-50X Control Panel
• Uzstādīšanas rokasgrāmata
• Montāžas aparatūras komplekts
• Keys for Enclosure Lock

3.2 Paneļa uzstādīšana

The ES-50X panel is designed for surface mounting. Choose a secure, dry location that is easily accessible for servicing and visible for status indication.

1. Mark the desired mounting holes on the wall using the panel's enclosure as a template.
2. Drill appropriate pilot holes for the mounting screws.
3. Secure the panel to the wall using the provided mounting hardware. Ensure the panel is level and securely fastened.

3.3 Elektroinstalācijas savienojumi

All wiring must comply with NFPA 70 (National Electrical Code) and NFPA 72 (National Fire Alarm and Signaling Code), as well as local codes.

• Maiņstrāvas pieslēgums: Connect the main AC power supply to the designated terminals. Ensure a dedicated circuit breaker is used.
• Akumulatora savienojums: Connect the standby batteries to the battery terminals. Observe correct polarity.
• SLC (Signaling Line Circuit) Wiring: Connect addressable devices (smoke detectors, heat detectors, modules) to the SLC terminals. Follow the wiring diagrams provided in the detailed installation manual for proper loop configuration.
• NAC (Notification Appliance Circuit) Wiring: Connect notification appliances (horns, strobes) to the NAC terminals. Ensure proper supervision and power calculations.
• Auxiliary Outputs/Inputs: Connect any auxiliary devices or monitoring inputs as required by the system design.

3.4. Sākotnējā ieslēgšana

After all wiring is complete and verified:

1. Ensure all field wiring is correctly terminated and free of shorts or opens.
2. Connect the standby batteries.
3. Apply AC power to the panel. The panel will perform a self-test and then display its operational status.
4. Verify that the panel indicates a "Normal" or "System Healthy" status. Address any trouble conditions immediately.

4. Lietošanas instrukcijas

4.1 Vadības paneļa interfeiss

The ES-50X features an LCD display, a numeric keypad, and dedicated function buttons for system interaction.

• LCD displejs: Shows system status, event messages, and menu options.
• Tastatūra: Used for entering codes and navigating menus.
• Funkciju taustiņi:
  • ACK (Acknowledge): Silences audible alarms and acknowledges new events.
  • KLUSUMS: Silences notification appliances (horns/strobes) after an alarm.
  • ATIESTATĪT: Resets the system after an alarm or trouble condition, clearing latched events.
  • TESTS: Initiates system test functions (requires appropriate access level).

4.2. Reaģēšana uz trauksmes signāliem

When an alarm occurs, the panel will activate notification appliances and display alarm information.

1. Apstiprināt: Nospiediet pogu ACK button to silence the panel's internal buzzer and acknowledge the alarm. The LCD will show the alarm location.
2. Klusums: After verifying the situation and ensuring safety, press the KLUSUMS button to silence horns and strobes. Do not silence if there is an active fire or danger.
3. Izmeklēt: Proceed to the alarm location to investigate the cause.
4. Atiestatīt: Once the cause of the alarm is resolved and the area is safe, press the RESET button. The panel will attempt to clear the alarm condition and return to normal. If the alarm persists, the condition has not been resolved.

4.3 Viewing System Status and Events

The panel's display provides real-time system status. Use the navigation buttons (up/down arrows) to scroll through event history or system menus.

• Normāls: Indicates the system is operating correctly with no active alarms, troubles, or supervisory conditions.
• Signalizācija: Indicates a fire alarm condition.
• Problēma: Indicates a fault in the system (e.g., open circuit, ground fault, low battery).
• Uzraudzība: Indicates a condition that requires attention but is not an immediate fire alarm (e.g., sprinkler valve closed).

5. Apkope

Regular maintenance is crucial for the reliable operation of your fire alarm system. All maintenance should be performed by qualified personnel.

5.1 Regulāras pārbaudes (reizi mēnesī)

• Verify the panel displays "Normal" status.
• Check for any visible damage to the panel or connected devices.
• Test a different initiating device (e.g., smoke detector, pull station) each month to ensure proper alarm activation and notification. Reset the system after each test.

5.2 Annual Inspection and Testing

A comprehensive annual inspection and test of the entire fire alarm system should be conducted by a certified fire alarm technician in accordance with NFPA 72.

• Full system test, including all initiating devices, notification appliances, and control functions.
• Battery load test and voltage pārbaude.
• Verification of communication with the central monitoring station (if applicable).
• Cleaning of smoke detectors.

5.3. Akumulatora nomaiņa

Standby batteries typically have a lifespan of 3-5 years. Replace them proactively or when the panel indicates a low battery trouble condition.

1. Disconnect AC Power: Turn off the circuit breaker supplying power to the panel.
2. Disconnect Old Batteries: Carefully disconnect the old batteries, observing polarity.
3. Uzstādiet jaunas baterijas: Connect new, fully charged batteries of the correct type and rating.
4. Restore AC Power: Turn on the circuit breaker. The panel should clear the battery trouble.
5. Atbrīvoties: Dispose of old batteries responsibly according to local environmental regulations.

6. Traucējummeklēšana

This section provides solutions to common issues. For complex problems, contact a qualified fire alarm technician.

7. Specifikācijas

Key technical specifications for the Fire-Lite ES-50X Addressable Alarm Control Panel:

• Modeļa numurs: ES-50X
• Zīmols: Fire-Lite
• Ierīces jauda: Up to 50 addressable devices
• Barošanas avots: AC (main), Battery (standby)
• Signalizācijas veids: Dzirdams
• Krāsa: Maroon
• Preces svars: 23.5 mārciņas (10.68 kilogrami)
• Iepakojuma izmēri: 22.2 x 20 x 6.2 collas
• Ražotājs: Fire-Lite
• UPC: 783008112622
• Stils: Tradicionāls

8. Garantija un atbalsts

For specific warranty details, please refer to the warranty statement included with your product packaging or contact Fire-Lite directly. Fire-Lite products typically come with a limited warranty covering defects in materials and workmanship.

Tehniskais atbalsts

For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact your authorized Fire-Lite distributor or a certified fire alarm technician. Do not attempt to repair the panel yourself, as this may void the warranty and compromise system integrity.

For general information about Fire-Lite products, visit the official Fire-Lite webvietne.