1. Ievads
This manual provides essential information for the safe and efficient operation of your Behringer NX3000D Ultra-Lightweight 3000 Watt Class-D Power Amplifier. Please read it thoroughly before use to ensure optimal performance and longevity of your device.
Galvenās funkcijas:
- Delivers 2 x 1500 Watts into 2 Ohms; 2 x 900 Watts into 4 Ohms; 3000 Watts into 4 Ohms (Bridge mode).
- Weighs less than 7.9 lbs / 3.6 kg, ensuring portability.
- Features revolutionary cool-running high-density Class-D technology for ultimate reliability and near-zero thermal buildup.
- Equipped with an ultra-efficient switch-mode power supply for noise-free audio, superior transient response, and low power consumption.
- High-performance DSP and 24-bit/96 kHz converters provide ultimate signal integrity and extreme dynamic range.
- DSP section includes sophisticated delay, crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), dynamics processing, and lockable security settings.
2. Svarīgi drošības norādījumi
Lietojot ierīci, vienmēr ievērojiet šos pamata drošības pasākumus ampdzīvotspējīgāks:
- Izlasiet šos norādījumus.
- Saglabājiet šos norādījumus.
- Ievērojiet visus brīdinājumus.
- Izpildiet visus norādījumus.
- Neizmantojiet šo ierīci ūdens tuvumā.
- Tīriet tikai ar sausu drānu.
- Neaizsedziet ventilācijas atveres. Uzstādiet saskaņā ar ražotāja norādījumiem.
- Neuzstādiet tuvu siltuma avotiem, piemēram, radiatoriem, siltuma reģistriem, krāsnīm vai citām ierīcēm (tostarp amppacēlāji), kas ražo siltumu.
- Nepārkāpiet polarizētā vai zemējuma spraudņa drošības mērķi. Polarizētam spraudnim ir divi asmeņi, no kuriem viens ir platāks par otru. Zemējuma tipa kontaktdakšai ir divi lāpstiņas un trešais zemējuma dakšas. Jūsu drošībai ir paredzēts platais asmens vai trešais zars. Ja komplektā iekļautā kontaktdakša neietilpst jūsu kontaktligzdā, konsultējieties ar elektriķi, lai nomainītu novecojušo kontaktligzdu.
- Aizsargājiet strāvas vadu no uzkāpšanas vai saspiešanas, jo īpaši pie kontaktdakšām, kontaktligzdām un vietā, kur tie iziet no ierīces.
- Izmantojiet tikai ražotāja norādītos piederumus/piederumus.
- Lietojiet tikai ar ratiņiem, statīvu, statīvu, kronšteinu vai galdu, ko norādījis ražotājs vai pārdod kopā ar ierīci. Kad tiek lietoti ratiņi, esiet piesardzīgs, pārvietojot ratiņu/ierīces kombināciju, lai izvairītos no savainojumiem apgāšanās rezultātā.
- Atvienojiet šo ierīci zibens negaisa laikā vai tad, ja tā netiek lietota ilgu laiku.
- Visus apkopes darbus nododiet kvalificētam apkopes personālam. Apkope ir nepieciešama, ja ierīce ir jebkādā veidā bojāta, piemēram, ir bojāts barošanas vads vai kontaktdakša, aparātā ir izlijis šķidrums vai iekrituši priekšmeti, ierīce ir bijusi pakļauta lietus vai mitruma iedarbībai, nedarbojas normāli. , vai ir nomests.
3. Kas ir kastē
Upon unpacking your Behringer NX3000D, ensure all items listed below are present and in good condition:
- Behringer NX3000D 3000W Ultra-Lightweight Class-D Power Ampdzīvāks
- Strāvas kabelis
- Quick Start Guide (this document serves as the comprehensive manual)
Ja kādas preces trūkst vai tās ir bojātas, lūdzu, nekavējoties sazinieties ar izplatītāju.
4. Produkts beidziesview
Familiarize yourself with the front and rear panels of your NX3000D ampdzīvāks.
4.1 Priekšējais panelis
Attēls: priekšpuse view Behringer NX3000D Power Amplifier, showing the main display, control knobs for channels A and B, and status indicators.
Attēls: Leņķiska priekšpuse view Behringer NX3000D Power Amplifier, highlighting the rack-mountable design and ventilation grilles.
- Barošanas poga: Pagriež ampmūžīgāku ieslēgšanu vai izslēgšanu.
- Level Controls (CH A/CH B): Pielāgojiet katra kanāla ieejas jutību.
- LCD displejs: Shows DSP settings, operating modes, and status information.
- Navigation Buttons (SETUP, PROCESS, UP/DOWN, EXIT): Used to navigate and adjust DSP parameters.
- LED Indicators (SIGNAL, LIMIT, PROTECT): Provide visual feedback on signal presence, clipping, and protection status.
4.2 Aizmugurējais panelis
Attēls: Aizmugure view Behringer NX3000D Power Amplifier, displaying input and output connectors, cooling fan, and power inlet.
Attēls: Leņķiska aizmugure view Behringer NX3000D Power Amplifier, showing the USB port for PC connection and additional ventilation.
- Maiņstrāvas ieeja: Connects to the main power supply using the provided power cable.
- Input Connectors (CH A/CH B): XLR/TRS combo jacks for connecting audio sources.
- Output Connectors (CH A/CH B): Twist-lock speaker connectors for connecting loudspeakers.
- USB ports: For connecting to a computer for DSP control and firmware updates.
- Dzesēšanas ventilators: Ensures proper thermal management of the ampdzīvāks.
5. Iestatīšana
Follow these steps to set up your Behringer NX3000D ampdzīvotspējīgāks:
- Izvietojums: Novietojiet amplifier in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure adequate space around the unit for airflow. For rack mounting, secure the amplifier using appropriate rack screws.
- Strāvas pieslēgums: Connect the supplied AC power cable to the AC input on the rear panel of the amplifier and then to a suitable power outlet. Ensure the amplifier's power switch is in the OFF position before connecting.
- Ievades savienojumi: Connect your audio source (e.g., mixer, audio interface) to the Input Connectors (CH A and/or CH B) on the rear panel using XLR or 1/4" TRS cables.
- Izvades savienojumi: Connect your passive loudspeakers to the Output Connectors (CH A and/or CH B) using high-quality speaker cables with twist-lock connectors. Ensure correct polarity (+ to + and - to -) and that the impedance of your speakers matches the amplifier's capabilities (2 Ohms, 4 Ohms, or Bridge mode 4 Ohms).
- Sākotnējā ieslēgšana: With all connections secure and input levels turned down, switch the amplifier's power button to the ON position. The display will illuminate, and the unit will perform a self-test.
6. Darbināšana Ampdzīvāks
The Behringer NX3000D features advanced DSP control for precise sound optimization.
6.1 Pamatdarbība
- Līmeņu regulēšana: Slowly increase the Level Controls for CH A and/or CH B until the desired volume is achieved. Monitor the SIGNAL and LIMIT LEDs to prevent clipping. The SIGNAL LED indicates audio presence, while the LIMIT LED indicates that the signal is approaching clipping.
- Uzraudzības statuss: The PROTECT LED will illuminate if the amplifier enters protection mode due to overheating, short circuits, or other issues. If this occurs, turn off the amplifier, resolve the issue, and then power it back on.
6.2 DSP vadība
The integrated DSP allows for comprehensive sound shaping and system management:
- Accessing DSP Settings: Izmantojiet IESTATĪŠANA button to enter the main DSP menu. Navigate through options using the UZ AUGŠU/UZ LEJU buttons and confirm selections with the rotary encoder.
- Krustojums: Configure high-pass and low-pass filters for each channel. Choose from 3 filter types (e.g., Butterworth, Linkwitz-Riley) and slopes up to 48 dB/octave. This is crucial for integrating subwoofers or bi-ampsistēmas.
- Izlīdzināšana (EQ): Utilize the 8 parametric EQs and 2 dynamic EQs per channel to fine-tune the frequency response. This helps in correcting room acoustics or tailoring the sound to specific preferences.
- Kavēšanās: Apply delay to individual channels to align speakers in different physical positions, ensuring phase coherence.
- Dinamikas apstrāde: Adjust compression, limiting, and gating settings to control the dynamic range of your audio.
- SmartSense Loudspeaker Impedance Compensation: This feature automatically adjusts the amplifier's output to match the loudspeaker impedance, providing consistent power delivery and improved sound quality.
- Drošības iestatījumi: Lock DSP settings to prevent unauthorized changes, ideal for fixed installations.
For detailed DSP parameter adjustments, refer to the full software manual available on the Behringer website or connect the amplifier to a PC via the USB port for software control.
7. Apkope
Pareiza apkope nodrošina jūsu ierīces ilgmūžību un optimālu veiktspēju ampdzīvāks.
- Tīrīšana: Regulāri notīriet ierīces ārpusi ampNoslaukiet filtru ar mīkstu, sausu drānu. Nelietojiet šķidrus tīrīšanas līdzekļus vai šķīdinātājus. Pārliecinieties, vai ventilācijas restes nav putekļi un gruži.
- Ventilācija: Vienmēr pārliecinieties, ka amplifier's ventilation openings are not obstructed. Overheating can lead to reduced performance and potential damage.
- Uzglabāšana: Ja uzglabājat amplifier for an extended period, disconnect it from power, clean it, and store it in a cool, dry place, preferably in its original packaging or a protective case.
8. Traucējummeklēšana
If you encounter issues with your Behringer NX3000D, consult the table below for common problems and solutions.
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| Nav jaudas | Power cable disconnected; Power outlet faulty; AmpIzdedzis drošinātājs. | Check power cable connection; Test outlet with another device; Contact qualified service personnel for fuse replacement. |
| Nav skaņas izvades | Input/output cables disconnected or faulty; Speaker impedance mismatch; Amplifier in protect mode; Input levels too low. | Check all cable connections; Verify speaker impedance; Check PROTECT LED and resolve underlying issue; Increase input levels gradually. |
| Izkropļota skaņa | Input signal too high (clipping); Speaker impedance mismatch; Faulty cables or speakers. | Reduce input signal (monitor LIMIT LED); Verify speaker impedance; Test with different cables/speakers. |
| Ampsildītājam pārkarst (ieslēgta PROTECT LED indikators) | Insufficient ventilation; Excessive load (low impedance speakers); Prolonged high-power operation. | Ensure proper ventilation; Use speakers with correct impedance; Reduce output level or allow cooling time. |
If the problem persists after attempting these solutions, please contact Behringer support or a qualified service technician.
9. Tehniskās specifikācijas
| Funkcija | Specifikācija |
|---|---|
| Zīmols | Bēringers |
| Modeļa numurs | NX3000D |
| Izvades vattage | 2 x 1500 Watts (2 Ohms); 2 x 900 Watts (4 Ohms); 3000 Watts (4 Ohms Bridge mode) |
| Skaļrunis Amplifikācijas veids | D klase |
| Preces svars | 7.92 pounds / 3.6 Kilograms |
| Produkta izmēri | 19.02 x 9.09 x 3.7 collas |
| Savienotāja veids | Twist-lock (Outputs), XLR/TRS Combo (Inputs) |
| Barošanas avots | Elektrība ar vadu |
| Voltage | 100V |
| Krāsa | Melns |
| DSP | High-performance DSP with 24-bit/96 kHz converters, delay, crossover, EQ, dynamics processing, SmartSense Impedance Compensation |
10. Garantija un atbalsts
10.1 Produkta garantija
The Behringer NX3000D amplifier parasti nāk ar 3 gads ierobežota garantija, indicating its design and engineering quality. Please refer to the warranty card included with your product or visit the official Behringer webvietne, lai iegūtu detalizētus noteikumus un nosacījumus.
Image: Behringer logo with a '3 Years Warranty' badge, indicating the product is designed and engineered in Germany.
10.2 Tehniskais atbalsts
For technical assistance, troubleshooting beyond this manual, or service inquiries, please visit the official Behringer website or contact their customer support. You can find more information and resources at the Behringer veikals.
