1. Ievads
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the ABB MPS3-230/24 Coated Power Supply. This unit is a reliable switch-mode power supply designed for industrial control cabinets, offering a stable 24 VDC output from a 95 to 265 VAC input.
2. Drošības informācija
Read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Uzstādīšanu un apkopi drīkst veikt tikai kvalificēts personāls.
- Ensure the power supply is disconnected from the main voltage before any installation, wiring, or maintenance work.
- Neatveriet ierīces korpusu. Iekšpusē nav detaļu, ko lietotājs varētu apkalpot.
- Aizsargājiet ierīci no mitruma, putekļiem un ekstremālām temperatūrām.
- Nodrošiniet pareizu ventilāciju ap iekārtu, lai novērstu pārkaršanu.
3. Produkts beidziesview
The ABB MPS3-230/24 is a compact and efficient DIN rail mountable power supply. It features short-circuit and overload protection, ensuring reliable operation in demanding environments.
This image displays the ABB MPS3-230/24 Coated Power Supply from an angled perspective. The top surface shows product information and safety warnings. The front face features input terminals labeled 'INPUT 100-240V~ N L 1 2 3' and output terminals labeled 'OUTPUT 24V=/3A + - 4 5', along with an 'OK' indicator. The device is designed for DIN rail mounting, visible by the mounting mechanism at the bottom. Ventilation grilles are present on the sides.
Galvenās funkcijas:
- DIN rail mountable for easy integration into control cabinets.
- Plašs ieejas tilpumstage range: 95 to 265 VAC.
- Stable 24 VDC output with a 3 Amp pašreizējais vērtējums.
- Integrated short-circuit and overload protection.
- LED indication for operational status.
- Coated for enhanced durability in industrial settings.
4. Iestatīšana un instalēšana
4.1. DIN sliedes montāža
- Ensure the DIN rail is securely mounted within the control cabinet.
- Position the power supply unit onto the DIN rail, ensuring the mounting clip engages correctly.
- Press the unit firmly until it clicks into place, indicating a secure attachment.
4.2. Elektroinstalācijas savienojumi
Before making any connections, ensure the main power supply is switched off.
- Input Connections (AC): Connect the AC input wires to the terminals labeled 'INPUT 100-240V~ N L 1 2 3'. Ensure correct polarity for Line (L) and Neutral (N). Terminal '3' is typically for protective earth (PE) if applicable.
- Output Connections (DC): Connect the DC load wires to the terminals labeled 'OUTPUT 24V=/3A + - 4 5'. Connect the positive (+) wire to terminal '4' and the negative (-) wire to terminal '5'.
- Use appropriate wire gauges for the current rating (3 Amps) lai novērstu pārkaršanu.
- Verify all connections are tight and secure to prevent loose contacts.
5. Darbība
Once installed and wired correctly, the power supply is ready for operation.
- Ieslēgšana: Switch on the main AC power supply to the unit.
- LED indikators: The 'OK' LED on the unit will illuminate when the output voltage is within the specified range, indicating normal operation.
- The unit provides a stable 24 VDC output for connected devices.
6. Apkope
The ABB MPS3-230/24 power supply is designed for minimal maintenance. However, periodic checks can ensure optimal performance and longevity.
- Tīrīšana: Periodically clean the unit's exterior and ventilation grilles with a soft, dry cloth to prevent dust accumulation. Ensure power is off before cleaning.
- Savienojuma pārbaude: Katru gadu pārbaudiet visus vadu savienojumus, vai tie ir stingri un nav nodiluma vai korozijas pazīmju.
- Vides apstākļi: Nodrošiniet, lai darba vide atbilstu norādītajam temperatūras un mitruma diapazonam.
7. Traucējummeklēšana
If the power supply is not functioning as expected, refer to the following common issues and solutions:
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| Nav izejas tilpumatage / 'OK' LED off | Nav ievades tilptage; Incorrect wiring; Overload/Short-circuit | Check input power supply; Verify wiring connections; Disconnect load and check for short-circuit. |
| Izejas tilptage nestabils | Ievades apjomstage fluctuations; Overload condition | Ensure stable input voltage; Reduce load or use a higher-rated power supply. |
| Unit feels excessively hot | Insufficient ventilation; Ambient temperature too high; Overload | Ensure adequate airflow; Check ambient temperature; Reduce load. |
Ja problēma joprojām pastāv pēc šo risinājumu izmēģināšanas, sazinieties ar kvalificētu servisa personālu.
8. Tehniskās specifikācijas
| Specifikācija | Vērtība |
|---|---|
| Modeļa nosaukums | MPS3-230/24 |
| Ievades apjomstage Diapazons | 95 līdz 265 VAC |
| Izejas apjomstage | 24 V līdzstrāva |
| Izejas strāvas vērtējums | 3 Amps |
| Izvades vattage | 72 vati |
| Formas faktors | Montējams uz DIN sliedes |
| Izmēri (HxWxD) | 132 x 75 x 71 mm |
| Darba temperatūras diapazons | 0 to +60 Degrees C |
| Dzesēšanas metode | Gaiss |
| Aizsardzība | Short-circuit and overload protected |
| Norāde | LED (OK) |
| Ražotājs | Zīm |
9. Garantija un atbalsts
9.1. Garantija
ABB products are manufactured to high standards and are typically covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation or contact your supplier for specific warranty terms and conditions applicable to the MPS3-230/24.
9.2. Tehniskais atbalsts
For technical assistance, product inquiries, or service requests, please contact your local ABB representative or authorized distributor. Ensure you have the product model number (MPS3-230/24) and any relevant purchase details available when seeking support.
