1. Ievads
Thank you for choosing the DXQ FL-40 High Pressure Diaphragm Pump. This manual provides essential information for the proper installation, operation, and maintenance of your pump. Please read it thoroughly before use to ensure safe and efficient performance.
Figure 1: DXQ FL-40 High Pressure Diaphragm Pump
Galvenās funkcijas:
- Izturīgs materiāls: Constructed from high-strength cast iron with powder coating, ensuring waterproof and rust-resistant properties for long-term use.
- Jaudīgs automātiskais spiediena sūknis: A fully automatic self-priming pump with a maximum flow rate of 17 L/min and an inlet PSI set to Max 40PSI (2.76Bar). Operates on 12V AC power.
- Drošības aizsardzība: Features built-in thermal protection and automatic pressure protection. Designed for long service life with quiet operation and no leakage.
- Ātrā uzstādīšana: Compact size, lightweight design, and stable performance facilitate instant assembly.
- Daudzpusīgas lietojumprogrammas: Suitable for various uses including food and beverage filling, liquid transfer, clean machine requirements, road work, and cooling systems.
Figure 2: Wide range of applications for the FL-40 pump
2. Drošības instrukcijas
Always observe the following safety precautions to prevent injury or damage to the pump.
- Pārliecinieties, vai barošanas avots atbilst sūkņa spriegumam.tage prasības (12V).
- Do not operate the pump with damaged wiring or connections.
- Izvairieties no sūkņa ilgstošas darbināšanas bez ūdens, jo tas var izraisīt tā bojājumus.
- Darbības laikā nodrošiniet atbilstošu ventilāciju ap sūkni.
- Do not use the pump for flammable liquids or in explosive atmospheres.
- Turiet rokas un vaļīgu apģērbu tālāk no kustīgajām daļām.
- Pirms jebkādu apkopes vai problēmu novēršanas darbu veikšanas atvienojiet strāvas padevi.
- The pump features built-in thermal protection to prevent overheating. If the pump stops unexpectedly, allow it to cool down before restarting.
Figure 3: Thermal Protection feature of the pump
3. Iekļautas sastāvdaļas
The DXQ FL-40 High Pressure Diaphragm Pump package typically includes the following components:
- 1 x Diaphragm Water Pump
- 1x filtrs
- 3 x veidgabali (dažādi savienojuma veidi)
Figure 4: Included filter and fittings
Figure 5: Key components and connections of the pump
4. Iestatīšana un instalēšana
Follow these steps for quick and proper installation of your diaphragm pump:
- Montāža: Securely mount the pump in a dry, well-ventilated area using the stable bracket. Ensure it is on a flat, stable surface to minimize vibration.
- Ieplūdes savienojums: Connect the water inlet hose to the designated inlet port (often labeled 'Inlet' or indicated by an arrow pointing towards the pump). It is recommended to install the included filter on the inlet line to prevent debris from entering the pump.
- Izejas savienojums: Connect the water outlet hose to the designated outlet port (often labeled 'Outlet' or indicated by an arrow pointing away from the pump).
- Elektriskais savienojums: Connect the pump's power wires to a 12V DC power source. Ensure correct polarity (red wire to positive, black wire to negative). It is advisable to install an inline fuse for protection.
- Uzpildiet sūkni (ja nepieciešams): While this is a self-priming pump, ensuring the inlet line is filled with water before the first use can aid in faster priming.
- Pārbaudiet, vai nav noplūdes: After all connections are made, slowly introduce water into the system and check for any leaks at the fittings. Tighten connections as needed.
Figure 6: Fast assembly and water flow direction
5. Darbība
Once installed, operating the DXQ FL-40 pump is straightforward:
- Sūkņa palaišana: Ensure all connections are secure and the power source is ready. Apply 12V DC power to the pump. The pump will begin to operate and self-prime.
- Automātiska darbība: The pump is designed to automatically turn on when water is demanded (e.g., a faucet is opened) and turn off when the demand stops and pressure builds up in the system.
- Flow and Pressure: The pump delivers a maximum flow of 17 L/min and maintains pressure up to 40 PSI.
- Uzraudzība: Periodically check the pump for unusual noises, vibrations, or leaks during operation.
6. Apkope
Regulāra apkope nodrošina sūkņa ilgmūžību un optimālu veiktspēju:
- Filtru tīrīšana: Regularly inspect and clean the inlet filter to prevent clogging and maintain optimal flow. Disconnect power, remove the filter housing, clean the mesh screen, and reassemble.
Figure 7: The included metal filter for debris prevention
- Savienojuma pārbaude: Periodically check all hose and electrical connections for tightness and signs of wear.
- Ziemošana (ja piemērojams): If the pump is used in an environment where temperatures drop below freezing, ensure it is drained completely or protected with RV antifreeze to prevent damage from freezing water.
- Vispārējā tīrīšana: Uzturiet sūkņa ārpusi tīru un bez netīrumiem un gružiem.
7. Traucējummeklēšana
Biežāk sastopamās problēmas un to risinājumus skatiet tālāk esošajā tabulā:
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| Sūknis nedarbojas | No power; Loose wiring; Blown fuse; Motor fault | Check power supply; Secure connections; Replace fuse; Contact support |
| Zema plūsma vai spiediens | Clogged inlet filter; Kinked or restricted hose; Air in system; Low voltage | Clean filter; Straighten hose; Bleed air from system; Check power supply |
| Sūknis darbojas nepārtraukti | Leak in system; Pressure switch malfunction; Open faucet | Check for leaks and repair; Contact support for pressure switch; Close all faucets |
| Sūknis ir trokšņains | Air in system; Loose mounting; Debris in pump | Bleed air; Secure mounting; Disconnect power and inspect pump (if safe) |
| Ūdens noplūst no sūkņa | Loose fittings; Damaged seals/diaphragm | Tighten fittings; Contact support for seal replacement |
8. Tehniskās specifikācijas
Detailed specifications for the DXQ FL-40 Diaphragm Pump:
| Specifikācija | Vērtība |
|---|---|
| Ražotājs | BananaB (DXQ) |
| Modeļa numurs | FL-40GMB12V000001 |
| Produkta izmēri | 36 x 12 x 10 cm (aptuveni 14.2 x 4.7 x 3.9 collas) |
| Svars | 2.4 kg (aptuveni 5.3 mārciņas) |
| Krāsa | Melns |
| Stils | Diafragma |
| Materiāls | Čuguns |
| Barošanas avots | 12V DC |
| Voltage | 12 volts |
| Maksimālais plūsmas ātrums | 17 litri minūtē |
| Maksimālais spiediens | 40 PSI (2.76 bar) |
| Maksimālais pacelšanas augstums | 2 metri |
| Baterijas ir iekļautas? | Nē |
| Nepieciešamas baterijas? | Nē |
Figure 8: Pump dimensions
Figure 9: Durable Cast Iron Material
9. Informācija par garantiju
For specific warranty terms and conditions, please refer to the product packaging or contact the seller/manufacturer directly. Keep your proof of purchase for any warranty claims.
10. Klientu atbalsts
If you encounter any issues not covered in this manual or require further assistance, please contact the seller or manufacturer through the platform where you purchased the product. Provide your model number and a detailed description of the issue for faster service.
