Lexmark MS810N Laser Printer User Manual

Ievads

This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of your Lexmark MS810N monochrome laser printer. Please read this guide thoroughly to ensure proper use and to maximize the performance and longevity of your device.

Attēls: priekšpuse view of the Lexmark MS810N Laser Printer, showing its compact design and control panel.

Iestatīšana

1. Izpakošana un sākotnējā pārbaude

Uzmanīgi izņemiet printeri no iepakojuma. Pārliecinieties, vai ir visas komplektā iekļautās sastāvdaļas:

• Lexmark MS810N Laser Printer
• Tonera kasetne
• Bungu vienība
• Strāvas kabelis
• Network/USB Cable (where applicable)

Inspect the printer for any visible damage. If damage is found, do not proceed with setup and contact support.

2. Installing the Toner Cartridge and Drum Unit

1. Atveriet printera priekšējās piekļuves durtiņas.
2. Remove the drum unit from its protective packaging.
3. Insert the drum unit into the printer until it clicks into place.
4. Unpack the toner cartridge. Gently shake it horizontally to distribute the toner evenly.
5. Insert the toner cartridge into the drum unit until it locks securely.
6. Aizveriet priekšējās piekļuves durtiņas.

3. Papīra ievietošana

The printer supports plain paper up to A4/Letter size with a maximum input sheet capacity of 650 sheets.

1. Atveriet papīra tekni.
2. Pielāgojiet papīra vadotnes atbilstoši ievietojamā papīra izmēram.
3. Ievietojiet papīra kaudzīti teknē, pārliecinoties, ka tā ir līdzena un zem maksimālās uzpildes līnijas.
4. Aizveriet papīra tekni.

4. Connecting Power and Network/USB

• Jauda: Connect the power cable to the printer and then to a grounded electrical outlet (110 Volts).
• Tīkls (Ethernet): Lai drukātu tīklā, pievienojiet Ethernet kabeli printera Ethernet portam un tīkla maršrutētājam vai komutatoram.
• USB: For direct connection, connect a USB cable from the printer's USB port to your computer.

5. Installing Printer Drivers

After connecting the printer, install the necessary drivers on your computer. Drivers can typically be found on the Lexmark official support website by searching for the MS810N model. Follow the on-screen instructions for installation.

Lietošanas instrukcijas

1. Pamata drukāšana

Lai izdrukātu dokumentu:

1. Pārliecinieties, vai printeris ir ieslēgts un pievienots datoram vai tīklam.
2. Atveriet datorā dokumentu, kuru vēlaties drukāt.
3. Izvēlieties File > Drukāt (vai līdzvērtīgu komandu jūsu lietojumprogrammā).
4. Choose the Lexmark MS810N from the list of available printers.
5. Pielāgojiet drukas iestatījumus pēc nepieciešamības (piemēram, kopiju skaitu, papīra izmēru, divpusējo drukāšanu).
6. Noklikšķiniet Drukāt.

The printer is capable of monochrome printing at speeds up to 55 pages per minute (ppm).

2. Izmantojot vadības paneli

The Lexmark MS810N features a 2.4-inch LCD display. Use the navigation buttons next to the display to access printer settings, view status, and perform various functions directly from the printer.

• Statuss: Check current printer status, toner levels, and error messages.
• Iestatījumi: Configure network settings, paper type, and other printer preferences.
• Pārskati: Print configuration pages or usage reports.

3. Duplex Printing (Two-Sided)

The MS810N supports automatic dual-sided printing. To enable this feature, select the duplex printing option within your computer's print dialog box before sending the print job.

Apkope

1. Replacing Toner Cartridge and Drum Unit

When the printer indicates low toner or a drum unit nearing its end of life, replace the respective component. Refer to the installation steps in the Setup section for guidance. Always use genuine Lexmark replacement parts for optimal performance.

2. Printera tīrīšana

Regulāra tīrīšana palīdz uzturēt drukas kvalitāti un pagarina printera kalpošanas laiku.

• Pirms tīrīšanas izslēdziet printeri un atvienojiet to no strāvas.
• Noslaukiet ārpusi ar mīkstu, neplūksnojošu drānu.
• Periodically clean the paper path rollers to prevent paper jams. Consult the full Lexmark service manual for detailed cleaning procedures.

3. Papīra iestrēgumu novēršana

If a paper jam occurs, the printer's display will show an error message. Follow these general steps:

1. Izslēdziet printeri un atvienojiet to.
2. Open all accessible covers and trays.
3. Uzmanīgi izņemiet iestrēgušo papīru, velkot to papīra ceļa virzienā, lai izvairītos no tā plīšanas.
4. Pārliecinieties, ka iekšpusē nav palikuši mazi papīra gabaliņi.
5. Close all covers and trays, then plug in and power on the printer.

Problēmu novēršana

For more detailed troubleshooting, refer to the comprehensive Lexmark support documentation available online.

Specifikācijas

Garantijas informācija

This renewed Lexmark MS810N printer comes with a 90 dienu ierobežota garantija. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the documentation provided with your purchase or contact the seller directly. Renewed products are also eligible for replacement or refund under the Amazon Renewed Guarantee if not satisfied with the purchase.

Atbalsts

For technical assistance, driver downloads, or further support regarding your Lexmark MS810N printer, please visit the official Lexmark support website. For issues related to your renewed product purchase or warranty claims, contact the seller, Printer Ready Canada, or Amazon Renewed customer service.

• Lexmark Support: Atsaucieties uz Lexmark's official support webvietne draiveriem, rokasgrāmatām un bieži uzdotajiem jautājumiem.
• Pārdevēja atbalsts: Contact Printer Ready Canada for purchase-specific inquiries.
• Amazon atjaunotā garantija: For details on returns and refunds, visit the Amazon atjaunotais veikals.