SIIG HDMI 2.0 Audio Extractor User Manual

1. Ievads

This user manual provides detailed instructions for the installation, operation, and troubleshooting of the SIIG HDMI 2.0 Audio Extractor (Model: CE-H24F11-S1). This device is designed to split an incoming HDMI audio signal into stereo analog audio and Toslink optical outputs, enabling connection to various audio systems that may lack HDMI input.

The extractor supports high-resolution video up to 4K/60Hz with HDR and is compliant with HDCP 2.2. It also features ARC (Audio Return Channel) support via Toslink and CEC bypass, ensuring compatibility with modern home theater setups. Please read this manual thoroughly before use to ensure proper setup and optimal performance.

2. Produkta īpašības

• HDMI 2.0a and HDCP 2.2 compliant.
• Supports HDCP 2.2, HDR, and CEC bypass.
• Video resolutions up to 4Kx2K@60Hz YUV 4:4:4 8-bit and 4K HDR YUV 4:2:0 10-bit.
• Supports 480p, 720p, 1080i, 1080p resolutions.
• Video bandwidth: 18Gbps (600MHz per channel).
• Audio extraction via 3.5mm stereo jack and Toslink optical output.
• ARC audio extraction via Toslink (S/PDIF).
• Supports audio embedded via stereo and S/PDIF (Toslink).
• Atbalstītie audio formāti:
  • HDMI: PCM 2/5.1/7.1, Dolby 5.1/7.1, DTS 5.1/7.1
  • Toslink (S/PDIF): PCM 2, Dolby 5.1, DTS 5.1
  • 3.5mm Stereo: PCM 2
• Sturdy metal enclosure for durability and EMI/RFI noise interference minimization.
• ESD protection: ±15kV Air & ±8kV Contact.
• Country of origin: Taiwan.
• Regulatory approvals: FCC, CE, RoHS.

3. Iepakojuma saturs

Please verify that all items are present and in good condition. If any items are missing or damaged, contact your vendor for assistance.

• 1x HDMI 2.0 Audio Extractor/Embedder (CE-H24F11-S1)
• 1x USB Type-A to Micro B Cable (for power)
• 1x Instalācijas rokasgrāmata (šis dokuments)

4. Produkts beidziesview un ostu apraksti

Priekšējais panelis:

• 3.5mm Stereo Output: Connect to analog audio devices (e.g., headphones, stereo speakers).
• S/PDIF (Toslink) Output: Connect to digital optical audio receivers or soundbars.
• HDMI izeja: Connect to an HDMI display (e.g., TV, monitor, projector).
• Output Signal LED Indicator: Illuminates when an HDMI output signal is detected.
• Atiestatīšanas poga: Izmanto, lai atiestatītu ierīci.
• Slide Switch (FW/NORMAL Mode):
  • Left (FW): Firmware update mode.
  • Right (NORMAL): Normal operating mode. Ensure this is set to NORMAL for regular use.

Aizmugurējā panelis:

• Micro-USB Port (DC 5V): Connect the provided USB power cable for device power. Also used for firmware updates.
• Strāvas LED indikators: Iedegas, kad ierīce ir ieslēgta.
• Input Signal LED Indicator: Illuminates when an HDMI input signal is detected.
• HDMI ieeja: Connect to an HDMI source device (e.g., Blu-ray player, game console, streaming device).
• 4-pin DIP Switch: Used to configure EDID settings and enable/disable ARC and audio extraction functions.

5. Iestatīšanas instrukcijas

Follow these steps to set up your SIIG HDMI 2.0 Audio Extractor:

1. Izslēgšanas ierīces: Ensure all source devices, displays, and audio systems are powered off before making any connections.
2. Pievienojiet HDMI ieeju: Connect an HDMI cable from your source device (e.g., Blu-ray player, game console) to the HDMI IEEJA port on the audio extractor.
3. Pievienojiet HDMI izeju: Pievienojiet HDMI kabeli no HDMI OUT port on the audio extractor to your display device (e.g., TV, monitor, projector).
4. Connect Audio Output (Digital): For digital audio, connect a Toslink (optical) cable from the S/PDIF (Toslink) Output port on the extractor to your audio receiver, soundbar, or ampdzīvāks.
5. Connect Audio Output (Analog): For analog stereo audio, connect a 3.5mm audio cable from the 3.5 mm stereo izeja port on the extractor to your headphones or stereo speakers.
6. Pievienojiet strāvu: Connect the provided USB Type-A to Micro B cable to the Mikro-USB ports (DC 5V) on the extractor and the other end to a USB power source (e.g., USB wall adapter, TV USB port). The Power LED Indicator will illuminate.
7. Verify Slide Switch: Ensure the slide switch on the front panel is set to the NORMĀLI position (right).
8. Ieslēgšanas ierīces: Power on your display, audio system, and source device in that order.

6. Lietošanas instrukcijas

6.1 EDID and Function Configuration (DIP Switch)

The 4-pin DIP switch on the back panel allows you to configure the EDID (Extended Display Identification Data) settings and control the ARC and audio extraction functions. Adjust these settings based on your connected devices and desired audio output.

Piezīme: After changing DIP switch settings, it is recommended to power cycle the audio extractor and all connected devices to ensure the new settings are applied correctly.

6.2 ARC (Audio Return Channel) Function

When ARC is enabled (PIN3 ON) and your display supports ARC, audio from your TV's internal tuner or smart apps can be sent back to the audio extractor via the HDMI cable and then output through the Toslink (S/PDIF) port to your audio system.

6.3 CEC Bypass

The device supports CEC (Consumer Electronics Control) bypass, allowing CEC commands to pass through the extractor to control connected HDMI devices. This means you can use a single remote to control multiple CEC-enabled devices in your setup.

7. Traucējummeklēšana

If you encounter issues with the SIIG HDMI 2.0 Audio Extractor, please refer to the following common troubleshooting steps:

• Nav video izvades:
  • Pārliecinieties, vai visi HDMI kabeļi ir droši pievienoti.
  • Verify the input source is selected correctly on your display.
  • Check the power connection to the extractor; the Power LED should be illuminated.
  • Izmēģiniet citu HDMI kabeli.
  • Adjust DIP switch settings for EDID (PIN1 & PIN2) to match your display's capabilities or try "EDID bypass".
  • Power cycle all connected devices (source, extractor, display).
• No Audio Output (Toslink/3.5mm):
  • Ensure audio cables (Toslink or 3.5mm) are securely connected to the correct output ports on the extractor and input ports on your audio system.
  • Verify the audio input is selected correctly on your audio receiver/soundbar.
  • Check DIP switch PIN4 is set to ON to enable audio extraction.
  • If using ARC, ensure DIP switch PIN3 is set to ON and your TV's ARC function is enabled.
  • Confirm the audio format from your source is supported by your audio system and the extractor (refer to "Product Features" for supported formats). Some audio systems may not support certain multi-channel formats.
  • Try setting DIP switch PIN1: ON, PIN2: OFF for 2ch audio output if your audio system only supports stereo.
  • Power cycle all connected devices.
• Intermittent Video/Audio:
  • Pārbaudiet, vai nav vaļīgu kabeļa savienojumu.
  • Pārliecinieties, vai strāvas padeve ir stabila.
  • Reduce cable lengths if possible, especially for HDMI.
  • Verify that the slide switch is in the NORMĀLI pozīciju.
  • Pārbaudiet ar dažādiem HDMI kabeļiem.
• HDR/4K Issues:
  • Ensure all connected HDMI cables are rated for HDMI 2.0 or higher and support 18Gbps bandwidth.
  • Verify your source and display devices both support 4K/60Hz and HDR.
  • Adjust EDID settings (PIN1 & PIN2) to ensure the correct video mode is selected.

8. Specifikācijas

9. Apkope

The SIIG HDMI 2.0 Audio Extractor is designed for reliable operation with minimal maintenance.

• Tīrīšana: Use a soft, dry cloth to clean the device. Avoid using liquid or aerosol cleaners, as they may damage the unit.
• Ventilācija: Pārliecinieties, ka ierīce ir novietota labi vēdināmā vietā, lai novērstu pārkaršanu. Neaizsedziet ventilācijas atveres.
• Uzglabāšana: Ja ierīce netiek lietota ilgstoši, uzglabājiet to vēsā, sausā vietā, pasargājot to no tiešiem saules stariem un ekstremālām temperatūrām.
• Programmaparatūras atjauninājumi: Periodically check the SIIG website for any available firmware updates for your model. Follow the instructions provided with the firmware update carefully.

10. Drošības informācija

Please observe the following safety guidelines to prevent damage to the device and ensure user safety:

• Nepakļaujiet ierīci ūdens vai pārmērīga mitruma iedarbībai.
• Nemēģiniet atvērt vai modificēt ierīci. Iekšpusē nav detaļu, ko lietotājs varētu apkalpot.
• Use only the provided power cable or a certified 5V USB power adapter.
• Sargājiet ierīci no siltuma avotiem, tiešiem saules stariem un viegli uzliesmojošiem materiāliem.
• Ensure proper grounding for all connected electrical equipment.

11. Garantija un tehniskais atbalsts

11.1 Informācija par garantiju

The SIIG HDMI 2.0 Audio Extractor (CE-H24F11-S1) comes with a 3 gada garantija. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty documentation provided with your purchase or visit the official SIIG webvietne.

11.2 Tehniskais atbalsts

For technical assistance, product inquiries, or troubleshooting beyond the scope of this manual, please contact SIIG customer support.

• Webvietne: Visit the official SIIG webvietne ar atbalsta resursiem, bieži uzdotajiem jautājumiem un kontaktinformāciju.
• Kontaktpersona: Refer to your product packaging or the SIIG webvietnē, lai iegūtu jaunāko tehniskā atbalsta kontaktinformāciju.