1. Produkts beidziesview
The Bytech 6FT LED Back Light Strip is designed to illuminate your hardware, providing vibrant multi-color lighting. This versatile LED strip is USB powered and controlled via a 24-key remote, offering 16 distinct colors and various lighting modes to enhance your viewing or gaming experience.
Image 1.1: Bytech 6FT LED Back Light Strip product and packaging.
2. Drošības informācija
- Ensure the power source is compatible with the USB power requirements of the LED strip.
- Do not expose the LED strip to water or excessive moisture as it is not water resistant. This product is intended for indoor use only.
- Avoid bending the LED strip sharply or applying excessive force, which may damage the internal circuitry.
- Uzglabāt bērniem nepieejamā vietā.
- Do not attempt to disassemble or modify the product. This will void any potential warranty.
- Unplug the LED strip from the power source before cleaning or when not in use for extended periods.
3. Iepakojuma saturs
Lūdzu, pārbaudiet, vai iepakojumā nav šādu priekšmetu:
- 1 x Bytech 6FT LED Back Light Strip
- 1 x 24 taustiņu tālvadības pults
4. Iestatīšana un instalēšana
- Sagatavojiet virsmu: Ensure the surface where you intend to install the LED strip is clean, dry, and smooth. Dust, dirt, or moisture can affect the adhesive's effectiveness.
- Pasākums un plāns: Before removing the adhesive backing, unroll the LED strip and temporarily position it to determine the best placement. The strip is 6 feet long.
- Nomizojiet un pielīmējiet: Carefully peel off the protective backing from the adhesive tape on the back of the LED strip. Begin sticking the strip to your desired surface, pressing firmly along its length to ensure good adhesion.
- Pievienojiet strāvas padevei: Locate the USB connector on the LED strip. Plug the USB connector into a compatible USB power source (e.g., a TV's USB port, a USB wall adapter, or a power bank).
- Testa funkcionalitāte: Once connected, the LED strip should light up. Use the remote control to test different colors and modes.
5. Lietošanas instrukcijas
The Bytech 6FT LED Back Light Strip is controlled using the included 24-key remote control. Ensure the remote has a clear line of sight to the LED strip's receiver.
Tālvadības pults funkcijas:
| Poga | Funkcija |
|---|---|
| IESLĒGTS/IZSLĒGTS | Ieslēdz vai izslēdz LED lenti. |
| Spilgtums uz augšu/uz leju | Pielāgo gaismekļu spilgtuma līmeni. |
| Color Selection Buttons | Directly select from 16 static colors (e.g., Red, Green, Blue, White, various shades). |
| FLASH | Activates a rapid flashing mode. |
| STROBE | Activates a slow strobe effect. |
| IZBALĪT | Cycles through colors with a smooth fading transition. |
| SMOOTH | Provides a gradual transition between colors. |
Piezīme: The remote control requires a CR2025 button cell battery (not included). Please ensure the battery is inserted with the correct polarity.
6. Apkope un kopšana
- Tīrīšana: To clean the LED strip, first unplug it from the power source. Use a soft, dry cloth to gently wipe away dust or dirt. Do not use liquid cleaners or abrasive materials.
- Uzglabāšana: If storing the LED strip for an extended period, ensure it is clean and dry. Coil it loosely to prevent damage to the strip or wiring. Store in a cool, dry place.
- Līme: The adhesive is designed for single application. Re-applying the strip multiple times may reduce its stickiness.
7. Traucējummeklēšana
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| LED lente neiedegas. | No power, loose connection, remote battery dead/incorrectly inserted. | Ensure USB is securely plugged into a working power source. Check remote battery and polarity. |
| Tālvadības pults nedarbojas. | Remote battery dead, no line of sight to receiver, remote too far. | Replace remote battery. Ensure remote is pointed directly at the strip's receiver. Move closer to the strip. |
| Gaismas mirgo vai spīd nekonsekventi. | Insufficient power, damaged strip. | Try a different USB power source with sufficient output. Inspect the strip for visible damage. |
| Līme nelīp. | Surface is dirty, oily, or textured; adhesive backing not fully removed. | Clean and dry the surface thoroughly before application. Ensure the protective film is completely removed. |
8. Specifikācijas
- Modelis: BYOPCA217BK
- Zīmols: Bytech
- Garums: 6 pēdas (aptuveni 1.83 metri)
- Gaismas avota veids: LED
- Barošanas avots: USB (ar vadu)
- Kontroles metode: 24-Key IR Remote Control
- Krāsas: 16 static colors + various dynamic modes
- Lietošana iekštelpās/ārā: Iekštelpās
- Ūdens izturības līmenis: Nav ūdensizturīgs
- Materiāls: Plastmasa
- Preces svars: 2.89 unces (apmēram 82 grami)
- UPC: 805112051533
9. Garantija un atbalsts
Warranty information for the Bytech 6FT LED Back Light Strip is not explicitly provided in the product specifications. For detailed warranty terms, technical support, or customer service inquiries, please contact the manufacturer, DEEJAYLED, or your point of purchase.
You may find contact information on the product packaging or the manufacturer's official webvietne.
