TSL TSL-100264

TSL piedziņas siksna un ķīļsiksna 2010 7PHE H7 lietotāja rokasgrāmata

For Hotpoint, Whirlpool, and Indesit Tumble Dryers

1. Produkts beidziesview

The TSL Drive Belt and V-Belt 2010 7PHE H7 is a replacement component designed for use in various Hotpoint, Whirlpool, and Indesit tumble dryer models. This belt is crucial for the proper rotation of the dryer drum, ensuring efficient drying cycles. It is manufactured to meet the specifications required for compatible appliances, providing reliable performance.

TSL Drive Belt 2010 7PHE H7

1.1. attēls: The TSL Drive Belt, showing its multi-ribbed surface designed for optimal grip and power transmission within the tumble dryer mechanism.

2. Saderība

This drive belt is compatible with a wide range of tumble dryer models from Hotpoint, Whirlpool, and Indesit. Please verify your appliance's model number against the list below to ensure compatibility before installation.

2.1. Compatible Hotpoint Models:

2.2. Compatible Indesit Models:

2.3. Compatible Maytag Modeļi:

2.4. Compatible Whirlpool/Bauknecht Models:

This belt also replaces part numbers: C00311014, 480112101469.

3. Uzstādīšana (iestatīšana)

Replacing a tumble dryer drive belt requires careful attention to safety and proper procedure. If you are unsure about any step, it is recommended to consult a qualified technician.

3.1. Drošības pasākumi:

3.2. Vispārīgie instalēšanas soļi:

  1. Piekļuve bungām: Depending on your dryer model, you may need to remove the top panel, front panel, or rear panel to gain access to the dryer drum and the motor assembly.
  2. Noņemiet veco jostu: Carefully note how the old belt is routed around the drum and motor pulley. Remove the old, broken, or worn belt.
  3. Position New Belt: Loop the new TSL drive belt around the dryer drum. Ensure the ribbed side of the belt faces the drum.
  4. Route Around Motor Pulley: Route the belt around the motor pulley and the idler pulley (if present). The idler pulley provides tension to the belt.
  5. Pārbaudiet spriegojumu un izlīdzinājumu: Once the belt is in place, rotate the drum manually a few times to ensure the belt is properly seated and aligned on both the drum and the motor pulley. The belt should feel taut but not overly stretched.
  6. Žāvētāja salikšana: Reattach all panels and components that were removed during disassembly. Ensure all screws and fasteners are securely tightened.
  7. Pārbaudes darbība: Plug the dryer back into the electrical outlet and run a short cycle to confirm proper operation of the drum. Listen for any unusual noises.
TSL Drive Belt coiled

3.1. attēls: The TSL Drive Belt in a coiled state, illustrating its flexible yet durable construction, essential for fitting around the dryer drum and motor pulley.

4. Darbība

The TSL Drive Belt is an internal component that facilitates the operation of your tumble dryer. Once correctly installed, it works by transmitting rotational power from the dryer's motor to the drum, causing the drum to spin. This spinning action, combined with heated air, is essential for drying clothes efficiently.

No direct user interaction with the belt is required during normal operation. Its function is entirely mechanical and internal to the appliance.

5. Apkope

While the drive belt itself requires minimal maintenance, periodic inspection can help prolong its lifespan and ensure optimal dryer performance.

Close-up of TSL Drive Belt ribs

5.1. attēls: Tuvplāns view of the TSL Drive Belt's ribbed surface, highlighting the design for efficient power transfer. Regular inspection of these ribs for wear is recommended.

6. Traucējummeklēšana

If your tumble dryer is experiencing issues related to drum rotation, the drive belt may be a contributing factor. Here are common symptoms and potential solutions:

Table 6.1: Common Drive Belt Related Issues
SimptomsIespējamais cēlonisRisinājums
Drum not spinning, motor humsBroken or detached drive beltInspect and replace the drive belt if broken. Reattach if detached.
Squealing or grinding noise during operationWorn or misaligned drive belt; worn idler pulleyInspect belt for wear. Check belt alignment. Lubricate or replace idler pulley if necessary.
Drum spins slowly or intermittentlyStretched or slipping drive beltReplace the drive belt. Ensure proper tension during installation.

For complex issues or if the problem persists after checking the belt, it is advisable to seek professional appliance repair services.

7. Specifikācijas

AtribūtsDetaļas
Produkta nosaukumsTSL Drive Belt and V-Belt 2010 7PHE H7
ZīmolsTSL
Modeļa numursTSL-100264
Part Number (Replaces)C00311014, 480112101469
Preces svars70 g
Iepakojuma izmēri20.5 x 20 x 7.8 cm
Nepieciešamas baterijas
Pirmais pieejamais datums31. gada 2024. oktobris
TSL Drive Belt showing manufacturing details

7.1. attēls: Cits view of the TSL Drive Belt, potentially showing manufacturing markings or part numbers.

8. Garantija un atbalsts

For information regarding warranty coverage for your TSL Drive Belt, please refer to the packaging or contact TSL customer support directly. Keep your purchase receipt as proof of purchase.

For technical assistance or further inquiries, please reach out to the manufacturer or your appliance service provider.

Saistītie dokumenti — TSL-100264

Iepriekšview TSL 3138 Bluetooth UHF RFID RAIN Reader User Guide
This user guide provides comprehensive information on the TSL 3138 Bluetooth UHF RFID RAIN Reader, covering its features, setup, operation, technical specifications, connectivity options, software development, troubleshooting, and regulatory compliance.
Iepriekšview TSL 3166 Bluetooth UHF RFID lasītāja lietotāja rokasgrāmata
Visaptveroša TSL 3166 Bluetooth UHF RFID lasītāja lietotāja rokasgrāmata, kurā aplūkota iestatīšana, darbība, tehniskās specifikācijas, problēmu novēršana un normatīvā informācija.
Iepriekšview TSL 2128P Bluetooth RAIN RFID UHF Reader Datasheet
Detailed datasheet for the TSL 2128P Bluetooth RAIN RFID UHF Reader, covering its high-performance RFID capabilities, long-range reading, ePop-Loq connectivity, comprehensive specifications, part numbers, and application details.
Iepriekšview TSL 1153 valkājama Bluetooth UHF RFID lasītāja lietotāja rokasgrāmata
Comprehensive user guide for the TSL 1153 Wearable Bluetooth UHF RFID Reader. This document covers device features, setup, operation, connectivity options (Bluetooth, USB), Micro SD card usage, software development, troubleshooting, maintenance, regulatory information, health and safety recommendations, and warranty details.
Iepriekšview TSL 2128 Bluetooth UHF RFID lasītāja lietotāja rokasgrāmata
Šajā lietotāja rokasgrāmatā ir sniegti visaptveroši norādījumi par TSL 2128 Bluetooth UHF RFID lasītāju, detalizēti aprakstot tā funkcijas, iestatīšanu, darbību un problēmu novēršanu efektīvai RFID datu uztveršanai.
Iepriekšview TSL Control and Networking Guide: Equipment Specifications and Usage
A comprehensive guide to TSL's control and networking equipment, detailing network switches, DMX nodes, fibre optics, looms, power distribution, rack solutions, and specification checklists. Features products from TSL, Luminex, Jands, and APC.