Ievads
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw. Please read these instructions carefully before using the tool to ensure safe and optimal performance. This tool is designed for cutting wood and similar materials.
Drošības instrukcijas
Vispārīgi elektroinstrumentu drošības brīdinājumi:
- Darba zonas drošība: Keep the work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Elektriskā drošība: Izvairieties no ķermeņa saskares ar iezemētām virsmām, piemēram, caurulēm, radiatoriem, plītīm un ledusskapjiem. Ja jūsu ķermenis ir iezemēts vai iezemēts, pastāv palielināts elektriskās strāvas trieciena risks.
- Personiskā drošība: Always wear appropriate personal protective equipment (PPE) including eye protection, hearing protection, and a dust mask. Stay alert, watch what you are doing, and use common sense when operating a power tool.
- Elektroinstrumenta lietošana un kopšana: Ensure the switch is in the off-position before connecting to the battery pack, picking up, or carrying the tool. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Use the correct power tool for your application. Do not force the power tool.
- Apkope: Apkopiet elektroinstrumentus un piederumus. Pārbaudiet, vai kustīgās daļas nav noregulētas vai nav salipušas, daļas nav salauztas un citi apstākļi, kas var ietekmēt elektroinstrumenta darbību.
Īpaši brīdinājumi par riņķveida zāģa drošību:
- Turiet rokas prom no griešanas vietas un asmens. Neturiet roku zem sagataves.
- Noregulējiet griešanas dziļumu to the thickness of the workpiece.
- Never hold the workpiece in your hands or across your leg while cutting. Secure the workpiece to a stable platform.
- Pārbaudiet apakšējo aizsargu for proper closing before each use. Do not operate the saw if the lower guard does not move freely and close instantly.
- Always use blades of the correct size and shape for the arbor hole.
- Nekad neizmantojiet bojātas vai nepareizas asmeņu paplāksnes vai skrūves.
Produkts beidziesview
Familiarize yourself with the components of your Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw before operation.
Image: The Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw, showcasing its red and grey housing, ergonomic handle, blade guard, and robust base plate. The saw blade is clearly visible, highlighting the tool's design for portability and ease of use.
Galvenās sastāvdaļas:
- Galvenais rokturis: Ergonomic grip for primary control and operation.
- Palīgrokturis: Provides additional stability and control during cutting.
- Ieslēgšanas/izslēgšanas slēdzis: Aktivizē un deaktivizē motoru.
- Vārpstas bloķēšana: Button used to lock the spindle for safe and easy saw blade changes.
- Asmens aizsargs: Retractable guard that protects the user from the rotating blade.
- Base Plate (Saw Table): The flat surface that rests on the workpiece, guiding the saw during cuts.
- Dziļuma regulēšanas svira: Mechanism for setting the desired cutting depth.
- Slīpuma regulēšanas svira: Mechanism for setting the desired cutting angle for bevel cuts.
- Zāģa asmens: The cutting accessory, typically a 165mm diameter blade with a 20mm arbor hole.
- Putekļu nosūkšanas adapteris: Port for connecting a dust collection system to minimize sawdust.
- Battery Pack Receptacle: Slot for inserting the Einhell Power X-Change 18V battery pack (battery not included).
Iestatīšana
1. Akumulatora uzstādīšana
Ensure the tool is switched off before installing or removing the battery pack.
- Align the battery pack with the receptacle on the tool.
- Slide the battery pack into the receptacle until it clicks securely into place.
- Lai izņemtu, nospiediet akumulatora bloka atbrīvošanas pogu un izbīdiet to ārā.
2. Saw Blade Installation
Always disconnect the battery pack before changing the saw blade to prevent accidental startup.
- Nospiediet un turiet vārpstas bloķēšanas pogu, lai novērstu asmens griešanos.
- Use the provided wrench to loosen the blade retaining screw by turning it clockwise (this is a left-hand thread).
- Noņemiet ārējo atloku un veco zāģa asmeni.
- Clean the inner flange and the blade mounting area thoroughly.
- Place the new saw blade onto the inner flange, ensuring the rotation direction arrow on the blade matches the arrow on the saw's housing.
- Replace the outer flange and tighten the blade retaining screw counter-clockwise (left-hand thread) firmly with the wrench while holding the spindle lock.
3. Griešanas dziļuma regulēšana
The cutting depth should be set so that the blade teeth protrude slightly below the workpiece, typically by about 2-3 mm, for efficient cutting and reduced kickback.
- Atlaidiet dziļuma regulēšanas sviru.
- Move the base plate up or down to achieve the desired cutting depth, using the depth scale as a guide.
- Cieši pievelciet dziļuma regulēšanas sviru, lai fiksētu iestatījumu.
4. Slīpuma leņķa regulēšana
The saw can make bevel cuts up to 45 degrees for angled cuts.
- Atskrūvējiet slīpuma regulēšanas sviru.
- Tilt the saw to the desired angle, indicated on the bevel scale.
- Tighten the bevel adjustment lever securely to lock the angle.
Lietošanas instrukcijas
1. Iedarbināšana un apturēšana
- To start the saw, first press the safety lock-off button (if present), then squeeze the trigger switch.
- To stop the saw, simply release the trigger switch. The blade will come to a stop.
2. Griezuma veikšana
- Stingri nostipriniet sagatavi ar fiksatoruamplai novērstu kustību griešanas laikā.
- Position the saw on the workpiece with the front of the base plate resting on the material. Ensure the blade is not touching the workpiece before starting the saw.
- Ieslēdziet zāģi un ļaujiet asmenim sasniegt pilnu ātrumu, pirms sākat apstrādāt materiālu.
- Slowly guide the saw through the workpiece, maintaining a steady, even pressure. Do not force the saw, as this can lead to kickback or damage to the tool/blade.
- After completing the cut, release the trigger switch and allow the blade to stop completely before lifting the saw from the workpiece.
3. Putekļu nosūkšana
For a cleaner work environment and improved visibility, connect a suitable dust extraction system (e.g., a shop vacuum) to the dust extraction adapter on the saw.
Apkope
Tīrīšana
Regularly clean the ventilation slots and the saw blade area to prevent dust buildup, which can affect performance and motor life. Use a soft brush or compressed air. Do not use water or solvents, as these can damage the tool's electrical components or plastic parts.
Asmeņu kopšana
Inspect the saw blade regularly for sharpness, cracks, or missing teeth. A dull or damaged blade can cause binding, kickback, and poor cut quality. Replace dull or damaged blades immediately with a suitable replacement blade (165mm diameter, 20mm arbor hole).
Uzglabāšana
Store the saw in a dry, secure place, out of reach of children. Always remove the battery pack before storing the tool for extended periods.
Problēmu novēršana
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| Zāģis neieslēdzas | Battery not charged or improperly installed; safety lock-off not engaged. | Charge battery, ensure proper installation, press safety lock-off before trigger. |
| Zāģis griež lēni vai iesprūst | Dull or incorrect blade; incorrect cutting depth; forcing the saw; workpiece not secured. | Replace blade, adjust depth, reduce feed pressure, secure workpiece firmly. |
| Pārmērīga vibrācija | Damaged or unbalanced blade; loose components; worn bearings. | Inspect/replace blade, check for loose screws and tighten, contact service if bearings are suspected. |
| Slikta griezuma kvalitāte (raupjas malas, šķembas) | Dull blade; incorrect blade type for material; too fast feed rate. | Replace blade, use appropriate blade for material, reduce feed rate. |
Specifikācijas
- Modelis: Einhell TE-CS 18/165-1 Li-Solo
- Voltage: 18 V (Battery Operated)
- Ātrums bez slodzes: 4,200 apgr./min
- Zāģa asmens diametrs: 165 mm
- Arbor Hole Diameter: 20 mm
- Maks. griešanas dziļums (90°): Apmēram 54 mm
- Maks. griešanas dziļums (45°): Apmēram 35 mm
- Preces svars: 2.72 kg (bez akumulatora)
- Asmens materiāls: Ātrgaitas tērauds
- Zobu skaits: 24
- Īpaša iezīme: Bezvadu darbība
- Iekļautie komponenti: Zāģa asmens
- Piezīme: Battery and charger are not included and must be purchased separately as part of the Einhell Power X-Change system.
Garantija un atbalsts
This Einhell product comes with a limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Einhell website. For technical support, service, or to inquire about replacement parts, please contact Einhell customer service through their official channels.
