Bryton Rider 320 GPS Cyclocomputer User Manual

1. Ievads

The Bryton Rider 320 is a high-performance GPS cyclocomputer designed for cyclists seeking comprehensive ride data. It features a clear 2.3-inch LCD display, long battery life, and support for various sensors to track speed, cadence, and heart rate. This manual provides essential information for setting up, operating, and maintaining your device.

Image: Bryton Rider 320 GPS Cyclocomputer device.

2. Kas ir kastē

Upon opening your Bryton Rider 320 package, verify that all components are present:

• Bryton Rider 320 GPS Cyclocomputer
• USB Cable (Micro USB)
• Sirds ritma sensors
• Stūres stiprinājums
• Lietošanas instrukcija (šis dokuments)

Note: The specific contents may vary slightly depending on the purchased bundle (e.g., "T" bundle includes sensors).

3. Iestatīšana

3.1. Ierīces uzlāde

Before first use, fully charge your Rider 320. Connect the provided Micro USB cable to the device's charging port and plug the other end into a USB power adapter or computer. The device will indicate charging status. A full charge provides approximately 35 hours of battery life.

3.2 Ierīces uzstādīšana

Attach the handlebar mount to your bicycle's handlebars or stem using the provided O-rings or zip ties. Ensure the mount is secure and positioned for optimal viewing. Align the Rider 320 with the mount and twist it clockwise until it locks into place.

3.3 Sensoru savienošana pārī

The Rider 320 supports Bluetooth and ANT+ sensors. To pair a sensor (e.g., heart rate, cadence, speed):

1. Power on your Rider 320.
2. Dodieties uz Iestatījumi izvēlne.
3. Izvēlieties Sensori un tad Pievienot sensoru.
4. Activate the sensor (e.g., wear the heart rate strap, spin the crank for cadence).
5. The Rider 320 will scan for available sensors. Select your sensor from the list to pair it.
6. Apstipriniet savienošanu pārī.

Note: Ensure sensors are within range and have working batteries.

3.4. Sākotnējā konfigurācija

Upon first power-on or after a factory reset, you will be prompted to set basic preferences:

• Valoda: Izvēlieties vēlamo valodu.
• Vienības: Choose between Metric (km/h, km) or Imperial (mph, miles).
• Laika josla: Iestatiet savu vietējo laika joslu.
• Lietotājs Profile: Enter basic information like age, weight, and height for accurate calorie and training calculations.

3.5 Bryton Active App Connection

The Bryton Active app (available for iOS and Android) enhances your Rider 320 experience. Download the app and create an account. To connect your device:

1. Iespējojiet Bluetooth savā viedtālrunī.
2. Open the Bryton Active app and navigate to the device pairing section.
3. On your Rider 320, go to Iestatījumi > Bluetooth > Savienot pārī ar lietotni.
4. Lai pabeigtu savienošanas pārī procesu, izpildiet lietotnē ekrānā redzamos norādījumus.

The app allows for display customization, firmware updates, and automatic ride data synchronization.

Image: Bryton Rider 320 display showing various data fields.

4. Ierīces darbība

4.1 Ieslēgšana/izslēgšana

• Ieslēgšana: Press and hold the power button (usually on the side or bottom) until the Bryton logo appears.
• Izslēgt: Press and hold the power button until a power-off prompt appears, then confirm.

4.2. Pamata navigācija

The Rider 320 typically uses physical buttons for navigation. Refer to the device's button layout for specific functions:

• UP/DOWN pogas: Navigate through menus or change data pages during a ride.
• OK/ENTER button: Confirm selections or start/stop recording.
• BACK/LAP button: Go back in menus or mark a lap during a ride.

4.3 Starting a Ride

1. Ensure the device has acquired a GPS signal (indicated by a solid GPS icon).
2. Nospiediet pogu OK/ENTER button to start recording your ride.
3. During the ride, you can switch between data pages using the UP/DOWN buttons.
4. Lai apturētu, nospiediet OK/ENTER button. To resume, press it again.
5. To end and save the ride, press and hold the OK/ENTER button, then confirm saving.

4.4 Displeja pielāgošana

The Rider 320 allows extensive customization of its data display pages. This can be done directly on the device or more conveniently through the Bryton Active app. You can select which data fields (e.g., speed, distance, heart rate, cadence, power, altitude) appear on each page and the number of fields per page.

4.5 GPS funkcionalitāte

The integrated GPS sensor provides accurate tracking of your location, speed, distance, and altitude. For best GPS performance, ensure the device has a clear view of the sky when starting a ride.

4.6 Datu sinhronizācija

After completing a ride, you can synchronize your data to the Bryton Active app via Bluetooth. Once synced to the app, your ride data can be automatically uploaded to third-party platforms like Strava, TrainingPeaks, or Komoot, if configured in the app settings.

5. Apkope

5.1. Tīrīšana

Regulāri tīriet ierīci ar mīkstu, damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the screen or casing. Ensure the USB port cover is securely closed to maintain its IP54 water resistance rating.

5.2 Akumulatora kopšana

Lai maksimāli palielinātu akumulatora darbības laiku:

• Avoid extreme temperatures during charging and storage.
• Do not leave the device fully discharged for extended periods.
• For long-term storage, charge the device to approximately 50-70%.

5.3. Programmaparatūras atjauninājumi

Bryton periodically releases firmware updates to improve performance, add features, and fix bugs. It is recommended to keep your device's firmware up to date. Updates can typically be performed via the Bryton Active app or by connecting the device to a computer and using Bryton's update tool.

6. Traucējummeklēšana

6.1 GPS signāla problēmas

• Nav signāla: Pārliecinieties, ka atrodaties ārā ar brīvu view of the sky. Avoid tall buildings or dense tree cover.
• Slow Acquisition: Allow a few minutes for the device to acquire a signal, especially if it's been moved a significant distance since its last use.

6.2 Sensor Connection Problems

• Sensor Not Found: Check if the sensor is active (e.g., spinning the wheel/crank, wearing the heart rate strap). Ensure the sensor's battery is not depleted.
• Traucējumi: Pārvietojieties tālāk no citām elektroniskām ierīcēm, kas varētu radīt traucējumus.
• Atkārtoti savienot pārī: Try unpairing and re-pairing the sensor through the device settings.

6.3 Bryton Active App Sync Issues

• Savienojuma kļūme: Ensure Bluetooth is enabled on your phone and the Rider 320. Restart both the device and the app.
• Lēna sinhronizācija: Data transfer can sometimes be slow. Ensure a stable Bluetooth connection and sufficient battery on both devices.
• Data Loss (Rare): If you experience data loss or persistent sync issues, try updating the device firmware and reinstalling the app. Contact Bryton support if problems persist.

6.4 Ierīce nereaģē

If the device freezes or becomes unresponsive, perform a soft reset by pressing and holding the power button for approximately 10-15 seconds until it powers off. Then, power it back on normally.

7. Specifikācijas

8. Garantija un atbalsts

Bryton products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official Bryton website. For technical support, troubleshooting assistance, or service inquiries, please contact Bryton customer support through their official webvietā vai autorizētos servisa centros.

Official Bryton Webvietne: www.brytonsport.com