Hansong A-white With Bluetooth-32x23in

Hansong Vanity Mirror with Lights and Bluetooth

Model: A-white With Bluetooth-32x23in

Brand: Hansong

Ievads

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Hansong Vanity Mirror with Lights and Bluetooth. This extra-large Hollywood-style makeup mirror features 18 LED bulbs, three color lighting modes, USB charging capabilities, and integrated Bluetooth speakers for an enhanced user experience. Please read this manual thoroughly before use to ensure proper functionality and safety.

Drošības informācija

Image showing a comparison between ordinary glass shattering and tempered glass remaining intact, highlighting the safety feature of the Hansong mirror.

Figure 1: Tempered Glass for Enhanced Safety

Iepakojuma saturs

Atverot iepakojumu, pārliecinieties, ka visas sastāvdaļas ir klāt un labā stāvoklī:

Iestatīšana

Uzstādīšana uz galda virsmas

  1. Carefully remove the mirror from its packaging.
  2. Locate the screws at the bottom of the mirror frame. Unscrew them if they are pre-installed.
  3. Align the holes in the detachable base with the corresponding holes at the bottom of the mirror.
  4. Insert and tighten the screws to secure the base firmly to the mirror.
  5. Place the assembled mirror on a stable, flat surface.
  6. Connect the power adapter to the mirror's power input port and then plug it into a standard electrical outlet.
Diagram showing three steps for tabletop mirror assembly: unscrewing, aligning base, and tightening screws.

Figure 2: Tabletop Installation Steps

Sienas stiprinājuma uzstādīšana

The mirror is designed with two back holes for wall mounting. Ensure the wall can support the mirror's weight (approximately 18.08 pounds). Professional installation is recommended for wall mounting.

  1. Identify the desired location on the wall. Ensure it is a sturdy surface.
  2. Measure the distance between the two mounting holes on the back of the mirror.
  3. Mark the corresponding points on the wall using a pencil and a level to ensure horizontal alignment.
  4. Drill pilot holes at the marked locations. Insert wall anchors if necessary (e.g., for drywall).
  5. Screw the provided mounting hardware (screws) into the wall, leaving a small portion protruding to hang the mirror.
  6. Carefully lift the mirror and align the back holes with the screws on the wall. Gently lower the mirror until it is securely seated.
  7. Connect the power adapter to the mirror's power input port and then plug it into a standard electrical outlet.
Diagram showing mirror dimensions and options for tabletop stand or wall mount installation.

Figure 3: Mirror Dimensions and Installation Options

Lietošanas instrukcijas

1. Power On/Off and Lighting Modes

The mirror features touch-sensitive controls located on the mirror surface.

Image showing the three color lighting modes: Cold Light, Natural Light, and Warm Light, with examples of suitable makeup types.

Figure 4: Three Color Lighting Modes

Image demonstrating dimmable lights with a slider from 'Sofe light' to 'Cold light' and touch controls on the mirror.

5. attēls: Spilgtuma regulēšana

2. Bluetooth savienojums

The mirror is equipped with two Bluetooth speakers and a microphone, allowing you to play music and answer calls.

  1. Pārliecinieties, vai spogulis ir ieslēgts.
  2. Activate Bluetooth on your smartphone or other Bluetooth-enabled device.
  3. Meklēt available Bluetooth devices. The mirror will appear as "Hansong Mirror" or similar.
  4. Select the mirror from the list to pair. A confirmation sound will indicate successful pairing.
  5. Once paired, you can play audio through the mirror's speakers and use the integrated microphone for calls.
Image showing a hand pointing to a Bluetooth icon on the mirror, with a smartphone displaying music playback, indicating connection to the mirror's speakers.

Figure 6: Connecting to Bluetooth Speakers

3. USB uzlādes ports

A USB output charging port is located on the side of the mirror, allowing you to charge your phone or other USB-powered devices.

Close-up image of the mirror's side showing a USB port with a charging cable connected to a smartphone.

Figure 7: USB Output Charging Port

4. 10X Magnifying Mirror

The included 10X magnifying mirror is detachable and features suction cups for easy attachment to the main mirror or any smooth surface. It is useful for detailed tasks such as eyebrow plucking or precise eye and lip makeup application.

Image showing the 10X magnifying mirror with suction cups, alongside close-ups of eye and lip makeup application.

Figure 8: 10X Magnifying Mirror

Apkope

Problēmu novēršana

ProblēmaIespējamais cēlonisRisinājums
Spoguļu apgaismojums neieslēdzas.
  • Strāvas vads nav droši pievienots.
  • Strāvas kontaktligzda nedarbojas.
  • Skārienjutīgais sensors nereaģē.
  • Ensure the power cord is fully inserted into both the mirror and the wall outlet.
  • Pārbaudiet kontaktligzdu ar citu ierīci.
  • Gently tap the touch sensor. If unresponsive, unplug and re-plug the mirror.
Bluetooth will not connect.
  • Bluetooth ierīce ir izslēgta.
  • Mirror is not in pairing mode or already connected to another device.
  • Device is too far from the mirror.
  • Pārliecinieties, vai jūsu ierīcē ir iespējots Bluetooth.
  • Turn the mirror off and on again. Disconnect from other devices if necessary.
  • Move your device closer to the mirror (within 30 feet/10 meters).
USB uzlāde nedarbojas.
  • Mirror is not powered on.
  • USB kabelis ir bojāts.
  • Device is not compatible or drawing too much power.
  • Ensure the mirror is plugged in and powered on.
  • Izmēģiniet citu USB kabeli.
  • Ensure your device is compatible with standard USB charging.

Specifikācijas

ZīmolsHansongs
ModelisA-white With Bluetooth-32x23in
Produkta izmēri23 collu garums x 32 collas platums
Rāmja materiālsMetāls
Montāžas veidsTabletop/Wall Mount
Īpašas funkcijasLighted, Touch Sensor, USB Charging, Bluetooth Speakers
Apgaismojuma režīmi3 Color (Warm, Cool, Natural)
Palielinājums10X (detachable mirror)
Preces svars18.08 mārciņas
UPC194230337378

Garantija un atbalsts

Hansong is committed to providing high-quality products. While the mirror is designed for durability with tempered glass, unforeseen issues may occur.

For any product-related inquiries, technical support, or warranty claims, please contact Hansong customer service directly. Please have your purchase details and model information ready when contacting support.

Contact information can typically be found on the Hansong official webvietnē vai caur jūsu iegādes punktu.

Saistītie dokumenti — A-white With Bluetooth-32x23in

Iepriekšview Holivudas stila LED tualetes spoguļa lietošanas instrukcija
Holivudas stila LED kosmētikas spoguļa lietošanas instrukcija, kurā detalizēti aprakstītas tā funkcijas, darbība, drošības pasākumi un atbilstība FCC prasībām. Iekļauta bezvadu uzlāde un Bluetooth savienojums.
Iepriekšview Balts kosmētikas galdiņš ar apgaismotu spoguli un stikla virsmu, montāžas instrukcijas
Visaptveroša DIYSET baltā kosmētikas galdiņa montāžas rokasgrāmata ar apgaismotu spoguli, stikla virsmu un 3 krāsu LED gaismām. Iekļautas soli pa solim instrukcijas, furnitūras saraksts un drošības padomi modelim dfse1000/NGSZT009.
Iepriekšview KEONJINN Holivudas tualetes spoguļa uzstādīšanas rokasgrāmata un funkcijas
Visaptverošas KEONJINN Holivudas kosmētikas spoguļa uzstādīšanas instrukcijas un galvenās funkcijas, tostarp modeļa informācija, funkciju apraksti un montāžas ceļveži.
Iepriekšview DRIPEX DP364-A kosmētikas spoguļa lietotāja rokasgrāmata
DRIPEX DP364-A kosmētikas spoguļa lietotāja rokasgrāmata, kurā aprakstīta montāža, darbība, drošības brīdinājumi, apkope un atbilstība FCC prasībām.
Iepriekšview 15 LED Hollywood Bluetooth Mirror User Manual and Specifications
User manual for the 15 LED Hollywood Bluetooth Mirror (Model LC0302) by Jiangmen Caixuan Technology Co., Ltd. Includes specifications, key operations, icon definitions, and FCC compliance information.