Sharkoon RGB SLIDER WT vidēja izmēra datora korpuss, lietotāja rokasgrāmata

1. Ievads

The Sharkoon RGB SLIDER WT is a versatile mid-tower PC case designed for optimal functionality and aesthetic appeal. It features an integrated RGB LED strip on the front panel, offering customizable lighting effects. The case supports various component configurations, including multiple cooling fan options and extensive storage capabilities. A tempered glass side panel provides a clear view iekšējo komponentu.

1.1. attēls: Priekšpuse view of the Sharkoon RGB SLIDER WT PC Case, showcasing the RGB LED strip and tempered glass side panel.

2. Iepakojuma saturs

Lūdzu, pārliecinieties, ka iepakojumā ir visi nepieciešamie priekšmeti:

• Sharkoon RGB SLIDER WT PC Case
• 1x 120mm Rear Fan (pre-installed)
• Accessory Box (containing screws, cable ties, and this manual)

3. Specifikācijas

Image 3.1: Diagram illustrating the dimensions of the Sharkoon RGB SLIDER WT PC Case.

4. Iestatīšana un instalēšana

4.1. Sagatavošana

Before beginning installation, ensure the PC case is placed on a stable, flat surface. Unpack all components and verify against the package contents list. It is recommended to wear an anti-static wrist strap to prevent damage to sensitive electronic components.

4.2. Mātesplates uzstādīšana

1. Install the I/O shield into the designated slot at the rear of the case.
2. Align the motherboard with the standoffs inside the case. Ensure the I/O ports align with the I/O shield.
3. Nostipriniet mātesplati, izmantojot komplektā iekļautās skrūves.

4.1. attēls: Interjers view of the PC case, showing the motherboard mounting area and pre-installed rear fan.

4.3. Barošanas bloka (PSU) uzstādīšana

1. Locate the PSU tunnel at the bottom rear of the case.
2. Slide the PSU into the tunnel from the rear of the case, ensuring the fan faces downwards (if applicable, for bottom intake).
3. Piestipriniet barošanas bloku ar skrūvēm no korpusa aizmugures.

4.4. Krātuves ierīces instalēšana

The case supports 3.5" HDDs and 2.5" SSDs.

• 3.5 collu cietie diski: Install into the drive cage located within the PSU tunnel.
• 2.5 collu SSD diski: Mount onto the dedicated SSD trays behind the motherboard tray or on top of the PSU tunnel.

4.2. attēls: Aizmugurējais salons view, highlighting cable management options and locations for 2.5" SSDs and 3.5" HDD cage.

4.5. Expansion Card Installation (e.g., GPU)

1. Noņemiet nepieciešamos PCIe slotu pārsegus no korpusa aizmugures.
2. Insert the expansion card into the corresponding PCIe slot on the motherboard.
3. Secure the card with screws.

4.6. Fan Installation (Optional)

Additional fans can be installed at the front and top of the case.

• Priekšējie ventilatori: Remove the front panel to access the mounting points for up to three 120mm fans.
• Populārākie fani: Mount up to two 120mm or 140mm fans to the top panel.

4.7. Kabeļu vadība

Utilize the cutouts and tie-down points behind the motherboard tray to route and secure cables. This improves airflow and maintains a clean interior aesthetic.

5. Lietošanas instrukcijas

5.1. Ieslēgšana

After all components are installed and cables connected, close the side panels. Connect the power cable to the PSU and a wall outlet. Press the power button on the top panel of the case to start your system.

5.1. attēls: Augšdaļa view of the case, detailing the front I/O panel with USB ports and audio jacks.

5.2. RGB apgaismojuma vadība

The front RGB LED strip can be controlled in two ways:

• Iebūvēts kontrolieris: Use the dedicated RGB control button on the top panel to cycle through 14 preset lighting modes.
• Mātesplates ARGB sinhronizācija: Connect the RGB cable from the case to a compatible 3-pin 5V ARGB header on your motherboard. The lighting can then be controlled via motherboard software (e.g., Asus Aura Sync, MSI Mystic Light Sync, Gigabyte Fusion, ASRock Polychrome SYNC).

5.3. Priekšējā paneļa porti

Priekšējais I/O panelis nodrošina ērtu piekļuvi:

• 2x USB 3.0 porti ātrdarbīgai datu pārsūtīšanai.
• 1x USB 2.0 port for general peripherals.
• Audio In (microphone) and Audio Out (headphone) jacks.

6. Apkope

6.1. Tīrīšana

• Ārpuse: Noslaukiet ārējās virsmas ar mīkstu, damp audums. Izvairieties no abrazīviem tīrīšanas līdzekļiem.
• Putekļu filtri: Regularly remove and clean the dust filters (e.g., top magnetic filter, bottom PSU filter) to maintain optimal airflow and prevent dust buildup inside the case.
• Interjers: Use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning the interior.

6.2. Gaisa plūsma

Ensure that the case has adequate clearance around it for proper airflow. Avoid blocking intake or exhaust vents. Regularly check fan operation to ensure they are spinning correctly.

7. Traucējummeklēšana

7.1. Sistēma neieslēdzas

• Verify that the power cable is securely connected to both the PSU and the wall outlet.
• Pārliecinieties, vai barošanas bloka (PSU) barošanas slēdzis ir ieslēgts (ON).
• Pārbaudiet, vai priekšējā paneļa barošanas pogas kabelis ir pareizi pievienots mātesplates priekšējā paneļa savienotājam.
• Confirm all internal power connections (24-pin ATX, CPU power, GPU power) are secure.

7.2. Fans Not Spinning

• Pārbaudiet ventilatora strāvas savienojumus ar mātesplati vai ventilatora kontrolieri.
• Ensure fan headers are enabled in the motherboard BIOS/UEFI settings.

7.3. RGB apgaismojums nedarbojas

• If using the built-in controller, press the RGB button to cycle modes.
• If using motherboard sync, ensure the ARGB cable is correctly connected to a 3-pin 5V ARGB header (not 4-pin 12V RGB).
• Verify that the motherboard's RGB software is installed and configured correctly.

7.4. Priekšējā paneļa USB/audio porti nedarbojas

• Check that the USB 3.0, USB 2.0, and HD Audio cables from the front panel are securely connected to the corresponding headers on the motherboard.
• Ensure motherboard drivers are installed.

8. Garantija un atbalsts

Sharkoon products are manufactured to high-quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Sharkoon website. For technical support, product inquiries, or service requests, please contact Sharkoon customer support through their official channels.

For further assistance, please visit the official Sharkoon webvietne: www.sharkoon.com