Mahli Robotic 3-in-1 Vacuum Cleaner

Ievads

Thank you for choosing the Mahli Robotic 3-in-1 Vacuum Cleaner. This intelligent omni-directional robotic vacuum is designed to simplify your home cleaning routine, effectively cleaning hardwood and tile floors. Please read this manual thoroughly before operating the device to ensure safe and optimal performance.

Svarīgi drošības norādījumi

Lietojot elektroierīci, vienmēr jāievēro pamata piesardzības pasākumi, tostarp:

• Pirms šīs ierīces lietošanas izlasiet visus norādījumus.
• Do not operate the vacuum cleaner in areas with flammable or combustible liquids, gases, or explosive dust.
• Turiet matus, vaļīgu apģērbu, pirkstus un visas ķermeņa daļas tālāk no atverēm un kustīgajām daļām.
• Nevāciet neko, kas deg vai smēķē, piemēram, cigaretes, sērkociņus vai karstus pelnus.
• Nelietot, ja nav ievietota putekļu tvertne un/vai filtri.
• Lietojiet tikai tā, kā aprakstīts šajā rokasgrāmatā. Izmantojiet tikai ražotāja ieteiktos piederumus.
• Neļaujiet to izmantot kā rotaļlietu. Īpaša uzmanība ir nepieciešama, ja to lieto bērni vai to tuvumā.
• Atvienojiet to no kontaktligzdas, kad to nelietojat un pirms apkopes.
• Ja ierīce nedarbojas, kā vajadzētu, tā ir nomesta, bojāta, atstāta ārpus telpām vai nokritusi ūdenī, nogādājiet to servisa centrā.

Iepakojuma saturs

Atverot iepakojumu, lūdzu, pārbaudiet tā saturu, lai pārliecinātos, ka tajā ir visas nepieciešamās lietas:

• Mahli Robotic 3-in-1 Vacuum Cleaner (MBOT3002BK)
• Uzlādes kabelis
• Side Brushes (pre-installed or separate)
• Lietotāja rokasgrāmata (šis dokuments)

Image: The Mahli Robotic 3-in-1 Vacuum Cleaner, showcasing its sleek, circular design and top panel.

Produkta sastāvdaļas

Familiarize yourself with the different parts of your robotic vacuum:

Attēls: Augšpusē view of the Mahli Robotic Vacuum, highlighting the power button and the access panel for the dustbin.

• 1. Barošanas poga: Nospiediet, lai sāktu/apturētu tīrīšanu.
• 2. Dustbin Cover: Lift to access the dustbin.
• 3. Indikatora gaisma: Shows charging status and operational mode.

Attēls: Apakšdaļa view of the Mahli Robotic Vacuum, showing the two side brushes, driving wheels, and the removable filter compartment.

• 4. Side Brushes: Sweep debris into the vacuum's path.
• 5. Driving Wheels: Allow the vacuum to move across surfaces.
• 6. Uzlādes kontakti: For connecting to the charging cable.
• 7. Dustbin Release: Button or latch to remove the dustbin.
• 8. Filtrs: Captures fine dust and particles.

Iestatīšana

1. Izpakošana: Carefully remove the vacuum cleaner and all accessories from the packaging.
2. Akumulatora uzlāde: Before first use, fully charge the vacuum cleaner. Connect the charging cable to the vacuum's charging port and plug the adapter into a wall outlet. The indicator light will show charging status (e.g., red for charging, blue for fully charged). A full charge takes approximately 2 hours.
3. Sānu suku uzstādīšana: If not pre-installed, gently push the side brushes onto their respective posts on the bottom of the vacuum until they click into place.
4. Sagatavojiet tīrīšanas zonu: Remove any large obstacles, loose cables, or small items from the floor that could entangle the vacuum or obstruct its path.

Lietošanas instrukcijas

1. Tīrīšanas cikla sākšana:

   Ensure the vacuum is fully charged and placed on the floor in the area you wish to clean. Press the power button on the top of the vacuum. The indicator light will turn blue, and the vacuum will begin its cleaning cycle.
2. Stopping a Cleaning Cycle:

   To pause or stop the vacuum during operation, press the power button again. The vacuum will stop, and the indicator light may change color or turn off.

3. Automātiskā tīrīšana:

   The Mahli Robotic Vacuum uses intelligent omni-directional technology to navigate and clean your floors. It will automatically adjust its path to cover the cleaning area and avoid obstacles. It is designed for hard floors such as hardwood and tile.

Apkope

Regular maintenance is crucial for optimal performance and longevity of your robotic vacuum. Always turn off the vacuum and unplug it before performing any maintenance.

1. Atkritumu tvertnes iztukšošana:

   It is recommended to empty the dustbin after each cleaning cycle or when the dustbin full indicator (if available) illuminates. Lift the dustbin cover, remove the dustbin, and empty its contents into a trash can. Rinse the dustbin with water if necessary, but ensure it is completely dry before reinserting.

2. Filtra tīrīšana:

   The filter should be cleaned regularly, ideally after every 1-3 uses depending on usage. Tap the filter gently to remove dust. For a deeper clean, the filter can be rinsed under running water. Allow the filter to air dry completely for at least 24 hours before reinserting it into the dustbin.
3. Sānu suku tīrīšana:

   Check the side brushes periodically for tangled hair or debris. Gently pull them off their posts to clean. If brushes are worn or damaged, replace them with new ones.

4. Cleaning Wheels:

   Inspect the driving wheels for any hair or debris that might impede movement. Clean as needed.

5. Sensoru tīrīšana:

   Wipe the sensors (located on the bottom and front of the vacuum) with a clean, dry cloth to ensure proper navigation.

Problēmu novēršana

If you encounter issues with your Mahli Robotic Vacuum, please refer to the following common problems and solutions:

Specifikācijas

Garantija un atbalsts

Mahli products are manufactured to the highest quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the warranty card included with your product or visit the official Mahli webvietne. Saglabājiet pirkuma čeku kā pirkuma apliecinājumu.

For further assistance, please contact Mahli Customer Service.