aigo AZ300 Mid Tower Computer Case User Manual

1. Ievads

Thank you for choosing the aigo AZ300 Mid Tower Computer Case. This manual provides detailed instructions for the installation, operation, and maintenance of your new computer case. Please read this manual thoroughly before beginning installation to ensure proper setup and safe use.

Figure 1: aigo AZ300 Mid Tower Computer Case (White)

2. Drošības informācija

• Always disconnect the power supply from the wall outlet before installing or servicing any components inside the case.
• Rīkojieties ar rūdīta stikla paneļiem uzmanīgi. Tie ir trausli un var saplīst, ja tie tiek nomesti vai pakļauti triecienam.
• Avoid placing the case in areas with high humidity, extreme temperatures, or direct sunlight.
• Sargājiet mazas detaļas un skrūves no bērniem.
• Nodrošiniet pareizu zemējumu, lai novērstu elektriskās strāvas apdraudējumu.

3. Produkts beidziesview

3.1 Priekšējais I/O panelis

Priekšējais I/O panelis nodrošina ērtu piekļuvi svarīgākajām pieslēgvietām un vadības ierīcēm.

2. attēls: Priekšējā I/O paneļa izkārtojums

• C tipa osta: 1x USB Type-C port for modern connectivity.
• USB 2.0 ports: 1x USB 2.0 port for peripheral connections.
• USB 3.0 ports: 1x USB 3.0 port for high-speed data transfer.
• HD Audio (Headset/Microphone): Separate jacks for audio output and microphone input.
• Reset/LED Button: Resets the system or controls LED lighting (if applicable).
• Barošanas poga: Ieslēdz vai izslēdz datoru.

3.2 Internal Layout and Component Compatibility

The aigo AZ300 case offers a spacious interior designed for various component sizes and efficient cooling.

Figure 3: Internal Component and Cooling Layout

• Mātesplates saderība: Supports ATX, Micro-ATX, and ITX motherboards.
• Storage Drive Bays: 2x 2.5" SSD bays and 2x 3.5" HDD bays.
• GPU garums: Maximum GPU length of 400mm.
• Barošanas bloka garums: Supports standard ATX power supplies up to 200mm.

4. Instalācijas rokasgrāmata

4.1 Lietas sagatavošana

1. Novietojiet korpusu uz līdzenas, stabilas virsmas.
2. Carefully remove the tempered glass side panels by unscrewing the thumb screws at each corner. Set the panels aside in a safe place.

Figure 4: Rear-Side View of Case

4.2 Mātesplates uzstādīšana

1. Install the I/O shield (if not pre-installed) into the rear opening of the case.
2. Align your ATX, Micro-ATX, or ITX motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's mounting holes.
3. Nostipriniet mātesplati ar komplektā iekļautajām skrūvēm.

Figure 5: Motherboard Mounting Areas

4.3 Barošanas bloka (PSU) uzstādīšana

1. Atrodiet barošanas bloka stiprinājuma vietu korpusa aizmugurē apakšējā daļā.
2. Slide your ATX power supply into the designated slot.
3. Secure the PSU to the case with screws from the rear.

4.4 Krātuves diska instalēšana

1. 2.5 collu SSD diski: Mount SSDs to the dedicated 2.5" bays, typically located behind the motherboard tray or in specific drive cages.
2. 3.5 collu cietie diski: Install HDDs into the 3.5" drive cages, usually found at the bottom front of the case.
3. Secure all drives with the appropriate screws.

Figure 6: Rear Internal View with Drive Bays

4.5 Expansion Card (GPU) Installation

1. Noņemiet nepieciešamos paplašināšanas slotu pārsegus no korpusa aizmugures.
2. Insert your graphics card or other expansion cards into the appropriate PCIe slots on the motherboard.
3. Nostipriniet kartes ar skrūvēm.

4.6 Dzesēšanas sistēmas uzstādīšana

The aigo AZ300 supports flexible cooling configurations.

• Fanu atbalsts: Multiple 120mm fan mounting points are available at the top, front, and rear.
• Radiatora atbalsts: Supports water coolers with radiators of 360mm, 240mm, and 120mm in designated areas.

4.7. Kabeļu pārvaldība

Izmantojiet kabeļu vadīšanas izgriezumus un nostiprināšanas punktus aiz mātesplates paliktņa, lai pārvaldītu kabeļus, uzlabojot gaisa plūsmu un nodrošinot estētiku.

5. Darbība

After all components are installed and connected, reattach the tempered glass side panels. Connect your peripherals, monitor, and power cable. Press the power button on the front I/O panel to start your system.

Use the USB ports (Type-C, USB 2.0, USB 3.0) for connecting external devices. The HD Audio jacks are for headphones and microphones.

6. Apkope

Regulāra apkope palīdz nodrošināt datora komponentu optimālu veiktspēju un ilgmūžību.

6.1 Putekļu filtra tīrīšana

The aigo AZ300 case is equipped with dust filters to prevent dust buildup. Clean these filters periodically.

• Augšējais magnētiskais putekļu filtrs: Gently lift and remove the magnetic dust filter from the top panel. Clean it with compressed air or rinse with water (ensure it's completely dry before reattaching).
• PSU putekļu filtrs: The dust filter for the power supply is located at the bottom of the case. Slide it out for cleaning.

Figure 7: Side Panel and Bottom Dust Filter Location

7. Traucējummeklēšana

• Sistēma neieslēdzas: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Check that the power supply switch is in the 'ON' position. Verify front panel power button connection to the motherboard.
• Nav displeja: Confirm the monitor is connected to the graphics card (not the motherboard integrated graphics, unless no dedicated GPU is present). Reseat the graphics card and RAM modules.
• Pārkaršana: Ensure all case fans are spinning and oriented correctly for airflow (intake/exhaust). Clean dust filters and internal components. Verify CPU cooler installation.
• USB porti nedarbojas: Pārbaudiet, vai USB pieslēgvietas no priekšējā paneļa ir pareizi pievienotas mātesplatei.

8. Specifikācijas

9. Garantija un atbalsts

aigo strives to provide excellent customer service. If you encounter any quality issues with your aigo AZ300 computer case, please contact us directly. We will assist you with troubleshooting and resolution.

For support, please refer to the contact information provided with your purchase or visit the official aigo webvietne.