Teltonika RUTX14 CAT12 4G LTE maršrutētāja lietotāja rokasgrāmata

1. Ievads

The Teltonika RUTX14 is a high-performance industrial cellular router designed for mission-critical applications requiring reliable and secure internet connectivity. Featuring CAT12 LTE for high-speed data transfer, dual-band Wi-Fi (802.11ac), GNSS/GPS capabilities, and Bluetooth, the RUTX14 provides robust networking solutions for various environments. This manual provides essential information for the proper installation, configuration, and operation of your RUTX14 router.

2. Drošības informācija

• Pirms jebkādu apkopes vai uzstādīšanas procedūru veikšanas vienmēr atvienojiet strāvas padevi.
• Pārliecinieties, ka ierīce ir uzstādīta labi vēdināmā vietā, lai novērstu pārkaršanu.
• Use only the power adapter and accessories provided or approved by Teltonika.
• Nepakļaujiet ierīci ūdenim, mitrumam vai ekstremālām temperatūrām.
• This device is intended for indoor use unless specifically rated for outdoor environments.

3. Iepakojuma saturs

Pārliecinieties, vai iepakojumā ir visas preces:

• Teltonika RUTX14 maršrutētājs
• Strāvas adapteris
• Mobile Antennas (x4)
• WiFi Antennas (x2)
• GNSS Antenna (x1)
• Ethernet kabelis
• Īsā lietošanas pamācība

4. Ierīce beigusiesview

Familiarize yourself with the physical components and ports of the RUTX14 router.

4.1. attēls: Labeled diagram of the Teltonika RUTX14 router, highlighting all external ports and connectors for easy identification. This includes mobile antenna connectors, GNSS antenna connector, WiFi antenna connectors, Bluetooth antenna connector, USB port, grounding screw, SIM card slots, reset button, 4-pin power socket, LAN ports, and WAN port.

Priekšējais panelis

4.2. attēls: Tuvplāns view of the RUTX14's front panel. This image displays the PWR LED, Reset button, WiFi 2.4GHz and 5GHz LEDs, SIM1 and SIM2 slots, four LAN ports, one WAN port, and status LEDs for WAN, SIM1, SIM2, WiFi, ETH, 3G/4G, and signal strength.

• PWR LED: Norāda jaudas stāvokli.
• Poga RESET: Used to restore factory defaults or reboot the device.
• WiFi LEDs (2.4/5): Indicate Wi-Fi activity for respective bands.
• SIM1/SIM2 Slots: For inserting cellular SIM cards.
• LAN porti (1-4): Ethernet ports for local network connections.
• WAN ports: Ethernet port for Wide Area Network connection (e.g., to an upstream modem).
• Statusa gaismas diodes: Provide visual feedback on WAN, SIM status, Wi-Fi, Ethernet, 3G/4G connectivity, and cellular signal strength.

Sānu panelis

4.3. attēls: Detalizēti view of the RUTX14's side panel. This image shows the various antenna connectors: Mobile AUX (x4), Mobile MAIN (x1), GPS (x1), WiFi (x2), and BT (x1). Also visible are the USB port and the grounding screw.

• Mobile Antenna Connectors (MAIN/AUX): For connecting cellular antennas.
• GPS Antenna Connector: For connecting a GNSS/GPS antenna.
• WiFi Antenna Connectors: For connecting Wi-Fi antennas.
• BT antenas savienotājs: For connecting a Bluetooth antenna.
• USB ports: Ārējo ierīču vai atmiņas ierīču pievienošanai.
• Zemējuma skrūve: Lai nodrošinātu ierīces pareizu iezemēšanu.

5. Aparatūras uzstādīšana

5.1. SIM kartes uzstādīšana

1. Locate the SIM card slots on the front panel.
2. Using a SIM ejector tool or a paperclip, press the small button next to the SIM slot to open the tray.
3. Insert your activated Nano-SIM card(s) into the tray(s) with the gold contacts facing down.
4. Viegli iespiediet paplāti atpakaļ slotā, līdz tā noklikšķ savā vietā.

5.2. Antenas savienojums

Connect the provided antennas to their respective connectors on the device:

• Mobilās antenas: Connect the four cellular antennas to the 'MOBILE MAIN' and 'MOBILE AUX' connectors.
• WiFi antenas: Connect the two Wi-Fi antennas to the 'WiFi' connectors.
• GNSS antena: Connect the GPS antenna to the 'GPS' connector.
• Bluetooth antena: Connect the Bluetooth antenna to the 'BT' connector.

Ensure all antennas are securely tightened by hand.

5.3. Strāvas pieslēgums

1. Connect the 4-pin power adapter to the power socket on the front panel.
2. Connect the other end of the power adapter to a suitable power source (9-50 VDC).
3. The PWR LED should illuminate, indicating the device is receiving power.

5.4. Zemējums

For enhanced safety and protection against electrical surges, connect a grounding wire to the grounding screw on the side panel and to a proper earth ground.

6. Sākotnējā iestatīšana

6.1. Piekļūstot Web Lietotāja interfeiss (WebLietotāja saskarne)

1. Connect your computer to one of the RUTX14's LAN ports using an Ethernet cable.
2. Atveriet a web pārlūkprogrammā un ievadiet noklusējuma IP adresi: 192.168.1.1
3. You will be prompted for login credentials. The default username is admin. The default password is usually found on a sticker on the device or in the Quick Start Guide.
4. Pēc veiksmīgas pieteikšanās jūs varēsiet piekļūt WebUI for configuration.

6.2. Pamatkonfigurācija

Follow the on-screen setup wizard or navigate through the WebUI to configure essential settings:

• WAN iestatījumi: Configure your primary internet connection (e.g., cellular APN settings, Ethernet WAN).
• LAN iestatījumi: Adjust the local network IP range if necessary.
• Wi-Fi iestatījumi: Set up your Wi-Fi network name (SSID) and password for both 2.4GHz and 5GHz bands.
• Mainīt noklusējuma paroli: For security, it is highly recommended to change the default administrator password immediately.

7. Operating the RUTX14

7.1. LED indikatoru izpratne

Monitor the front panel LEDs to understand the router's operational status:

• PWR: Solid green indicates power on.
• SIM1/SIM2: Indicates active SIM card and network registration.
• 3G/4G: Indicates cellular network type (3G or 4G LTE).
• Signāla stiprums: Multiple LEDs indicate the strength of the cellular signal. More LEDs lit means stronger signal.
• WiFi (2.4/5): Indicates Wi-Fi activity on the respective band.
• ETH/LAN/WAN: Norāda Ethernet saites statusu un aktivitāti.

7.2. LTE Failover

The RUTX14 supports automatic LTE failover, ensuring continuous internet connectivity. If the primary WAN connection (e.g., Ethernet) fails, the router can automatically switch to the cellular LTE connection. This feature is configured within the WebUI under Network > WAN settings.

7.3. GNSS/GPS Functionality

With the connected GNSS antenna, the RUTX14 can provide precise location data. This functionality is accessible and configurable through the WebUI, enabling applications such as fleet tracking or asset management.

7.4. Bluetooth savienojums

The integrated Bluetooth module allows for short-range wireless communication with compatible devices, enabling various IoT and industrial applications. Configuration options are available in the WebLietotāja interfeiss

8. Apkope

8.1. Programmaparatūras atjauninājumi

Regularly check for and install firmware updates to ensure optimal performance, security, and access to new features. Firmware updates can be performed via the WebUI under System > Firmware.

8.2. Rūpnīcas atiestatīšana

If you encounter persistent issues or forget your login credentials, you can perform a factory reset. Press and hold the RESET button for approximately 10 seconds while the device is powered on. This will revert all settings to their default values.

8.3. Tīrīšana

Ierīces ārpuses tīrīšanai izmantojiet mīkstu, sausu drānu. Nelietojiet šķidrus tīrīšanas līdzekļus vai šķīdinātājus.

9. Traucējummeklēšana

• Nav jaudas: Ensure the power adapter is securely connected and the power outlet is functional. Check the PWR LED.
• Nav interneta savienojuma:
  • Verify SIM card is correctly inserted and activated.
  • Check cellular signal strength LEDs.
  • Apstipriniet APN iestatījumus sadaļā WebUI are correct.
  • If using Ethernet WAN, ensure the cable is connected and the upstream device is working.
• Nevar piekļūt WebUI:
  • Pārliecinieties, vai dators ir pievienots LAN portam.
  • Pārliecinieties, vai datora IP iestatījumi ir iestatīti tā, lai IP adrese tiktu iegūta automātiski (DHCP).
  • Confirm you are using the correct IP address (192.168.1.1) and credentials.
  • Mēģiniet notīrīt pārlūkprogrammas kešatmiņu vai izmantot citu pārlūkprogrammu.
• Lēni ātrumi:
  • Check cellular signal strength and try repositioning antennas.
  • Pārliecinieties, ka citas ierīces nepatērē pārmērīgu joslas platumu.
  • Verify your cellular data plan limits.

10. Specifikācijas

11. Garantija un atbalsts

Teltonika products are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Teltonika website. For technical support, firmware downloads, and additional resources, please consult the Teltonika support portal or contact your vendor.