1. Produkts beidziesview
The DieseRC Radio Frequency Light Remote Control Switch system allows for wireless control of lights and other electrical appliances. It consists of a relay receiver and two remote control transmitters, operating on a 433MHz RF frequency. This manual provides instructions for installation, setup, and operation.
2. Iepakojuma saturs
- 1x Relay Receiver
- 2x Transmitters (with CR2016 batteries included)
- 1x Product Manual (this document)
3. Produkta specifikācijas
| Parametrs | Vērtība |
|---|---|
| Uztvērēja darba sējumstage | AC 85V ~ 240V |
| Klusā strāva | <5mA |
| Maksimālā strāva | 10A |
| RF frekvence | 433 MHz |
| Darba temperatūra | -30°C ~ +80°C |
| Jutīguma uztveršana | > 97 dBm |
| Storage Remote Controls | Līdz 20 gab |
| Support Encoding | 1527 Learning code |
| RF Operating Mode | ASK superheterodīna bezvadu uztveršana |
| Receiving Range (Open Space) | > 50 metri |
| Tapu konfigurācija | N / L |
| Darbības režīmi | Momentary / Toggle / Latched Mode |
| Raidītāja akumulators | 2x CR2016 (iekļauts) |
| Wattage | 1500 vati |
| Maksimālā pārslēgšanas strāva | 10 Amps |
4. Uzstādīšana
The receiver unit is designed for easy integration into existing electrical systems. It should be installed between the power supply and the device you wish to control (e.g., a lamp). The compact size (70*38*21 mm) allows for flexible placement. Ensure all power is disconnected before installation.
The receiver is housed in a protective box for enhanced safety. No complex wiring is required for basic operation, but professional installation is recommended for those unfamiliar with electrical work.
5. Darbības režīmi
The receiver supports three distinct operating modes: Momentary, Toggle, and Latched. The desired mode must be set during the setup process.
5.1. Tūlītējais režīms
In Momentary Mode, the relay activates only while the remote button is pressed. Releasing poga deaktivizē releju.
- Press and hold one button on the transmitter: The connected device will turn ON.
- Release the button: The connected device will turn OFF.
5.2. Pārslēgt režīmu
In Toggle Mode, each press of the remote button alternates the relay's state (ON/OFF).
- Press a button on the transmitter: The connected device will turn ON.
- Nospiediet pogu tas pats button again: The connected device will turn OFF.
Piezīme: The product is typically pre-set to Toggle Mode from the factory.
5.3. Fiksētais režīms
Latched Mode requires two distinct buttons on the remote: one for ON and one for OFF.
- Press the "ON" button: The connected device will turn ON.
- Press the "OFF" button: The connected device will turn OFF.
Piezīme: This mode requires a remote with at least two distinct buttons for ON/OFF functionality.
6. Iestatīšana un savienošana pārī
To pair a transmitter with the receiver and set the operating mode, follow these steps:
6.1. Pārošana īslaicīgajam režīmam
- Press the learning button on the receiver 1 reizi.
- Pagaidiet aptuveni 3 sekundes.
- Press any button on the transmitter. The pairing is successful.
6.2. Pārī savienošana pārslēgšanas režīmam
- Press the learning button on the receiver 2 reizes.
- Pagaidiet aptuveni 3 sekundes.
- Press any button on the transmitter. The pairing is successful.
6.3. Pārošana fiksētajam režīmam
- Press the learning button on the receiver 3 reizes.
- Pagaidiet aptuveni 3 sekundes.
- Press the desired "ON" button on the transmitter.
- Press the desired "OFF" button on the transmitter. The pairing is successful.
Piezīme: For Latched Mode, you need a transmitter with at least two distinct buttons to assign ON and OFF functions.
7. Resetting the Receiver
To clear all paired transmitters from the receiver's memory:
- Press the learning button on the receiver 8 reizes pēc kārtas.
- Atiestatīšana ir veiksmīga.
Svarīgi: After a reset, all previously paired remote controls will no longer function with this receiver. You will need to re-pair them following the setup instructions above.
8. Product Features and Applications
The DieseRC RF Wireless Relay Module offers robust performance and versatility:
- Spēcīgs signāls: The 433MHz radio frequency signal can penetrate walls, floors, and doors, providing reliable control within a 50-meter range in open areas.
- High Capacity Relay: Aprīkots ar 10 Amp relay, it can handle high-power electrical appliances up to 1500W.
- Izturīgi komponenti: The high-quality relay is rated for over 400,000 operations, and the remote control transmitter buttons are designed for over 500,000 clicks.
- Wide Voltage Saderība: The receiver supports AC 85V~250V, making it suitable for 110V, 220V, 230V, and 240V systems.
- Kompakts dizains: The mini size of the receiver (70*38*21 mm) and the portable key-fob style transmitters ensure convenience and discreet installation.
This system is suitable for a wide range of applications in homes, farms, factories, offices, laboratories, and supermarkets. It can remotely control various devices such as lamps, lighting fixtures, ventilation equipment, food waste disposers, and other DIY wireless projects.
9. Transmitter Details
The remote control transmitter features a simple design for ease of use.
The transmitter includes an indicator light, a silicone button for operation, and a metal keychain for portability. It is powered by two CR2016 batteries, which are replaceable.
